Outputs (63)

Enabling high-fidelity personalised pharmaceutical tablets through multimaterial inkjet 3D printing with a water-soluble excipient (2024)
Journal Article

Additive manufacturing offers manufacture of personalised pharmaceutical tablets through design freedoms and material deposition control at an individual voxel level. This control goes beyond geometry and materials choices: inkjet based 3D printing e... Read More about Enabling high-fidelity personalised pharmaceutical tablets through multimaterial inkjet 3D printing with a water-soluble excipient.

Enabling High-fidelity Personalized Pharmaceutical Tablets through Multimaterial Inkjet 3D Printing with a Water-soluble Excipient (2024)
Journal Article

Additive manufacturing offers manufacture of personalised pharmaceutical tablets through design freedoms and material deposition control at an individual voxel level. This control goes beyond geometry and materials choices: inkjet based 3D printing e... Read More about Enabling High-fidelity Personalized Pharmaceutical Tablets through Multimaterial Inkjet 3D Printing with a Water-soluble Excipient.

Synergy of nanocrystalline carbon nitride with Cu single atom catalyst leads to selective photocatalytic reduction of CO2 to methanol (2024)
Journal Article

Carbon nitride (C3N4) possesses both a band gap in the visible range and a low-lying conduction band potential, suitable for water splitting and CO2 reduction reactions (CO2RR). Yet, bulk C3N4 (b-C3N4) suffers from structural disorder leading to slug... Read More about Synergy of nanocrystalline carbon nitride with Cu single atom catalyst leads to selective photocatalytic reduction of CO2 to methanol.

Sensing the Spin State of Room-Temperature Switchable Cyanometallate Frameworks with Nitrogen-Vacancy Centers in Nanodiamonds (2024)
Journal Article

Room-temperature magnetically switchable materials play a vital role in current and upcoming quantum technologies, such as spintronics, molecular switches, and data storage devices. The increasing miniaturization of device architectures produces a ne... Read More about Sensing the Spin State of Room-Temperature Switchable Cyanometallate Frameworks with Nitrogen-Vacancy Centers in Nanodiamonds.

Atomic-Scale Time-Resolved Imaging of Krypton Dimers, Chains and Transition to a One-Dimensional Gas (2024)
Journal Article

Single-atom dynamics of noble-gas elements have been investigated using time-resolved transmission electron microscopy (TEM), with direct observation providing for a deeper understanding of chemical bonding, reactivity, and states of matter at the na... Read More about Atomic-Scale Time-Resolved Imaging of Krypton Dimers, Chains and Transition to a One-Dimensional Gas.

Rapid synthesis of magnetic microspheres and the development of new macro-micro hierarchically porous magnetic framework composites (2023)
Journal Article

Magnetic framework composites (MFCs) are a highly interesting group of materials that contain both metal–organic frameworks (MOFs) and magnetic materials. Combining the unique benefits of MOFs (tuneable natures, high surface areas) with the advantage... Read More about Rapid synthesis of magnetic microspheres and the development of new macro-micro hierarchically porous magnetic framework composites.

Subnanometer-Wide Indium Selenide Nanoribbons (2023)
Journal Article

Indium selenides (InxSey) have been shown to retain several desirable properties, such as ferroelectricity, tunable photoluminescence through temperature-controlled phase changes, and high electron mobility when confined to two dimensions (2D). In th... Read More about Subnanometer-Wide Indium Selenide Nanoribbons.

Host–Guest Chemistry in Boron Nitride Nanotubes: Interactions with Polyoxometalates and Mechanism of Encapsulation (2022)
Journal Article

Boron nitride nanotubes (BNNTs) are an emerging class of molecular container offering new functionalities and possibilities for studying molecules at the nanoscale. Herein, BNNTs are demonstrated as highly effective nanocontainers for polyoxometalate... Read More about Host–Guest Chemistry in Boron Nitride Nanotubes: Interactions with Polyoxometalates and Mechanism of Encapsulation.

Densified HKUST-1 Monoliths as a Route to High Volumetric and Gravimetric Hydrogen Storage Capacity (2022)
Journal Article

We are currently witnessing the dawn of hydrogen (H2) economy, where H2 will soon become a primary fuel for heating, transportation, and long-distance and long-term energy storage. Among diverse possibilities, H2 can be stored as a pressurized gas, a... Read More about Densified HKUST-1 Monoliths as a Route to High Volumetric and Gravimetric Hydrogen Storage Capacity.

Defect Etching in Carbon Nanotube Walls for Porous Carbon Nanoreactors: Implications for CO2 Sorption and the Hydrosilylation of Phenylacetylene (2022)
Journal Article

A method of pore fabrication in the walls of carbon nanotubes has been developed, leading to porous nanotubes that have been filled with catalysts and utilized in liquid- and gas-phase reactions. Chromium oxide nanoparticles have been utilized as hig... Read More about Defect Etching in Carbon Nanotube Walls for Porous Carbon Nanoreactors: Implications for CO2 Sorption and the Hydrosilylation of Phenylacetylene.

Reactive Jetting of High Viscosity Nanocomposites for Dielectric Elastomer Actuation (2022)
Journal Article

The layer-by-layer nature of additive manufacturing is well matched to the layer construction of stacked dielectric actuators, with inkjet printing offering a unique opportunity due to its droplet-on-demand capability, suitable for multi-material pro... Read More about Reactive Jetting of High Viscosity Nanocomposites for Dielectric Elastomer Actuation.

Stabilization of Polyoxometalate Charge Carriers via Redox‐Driven Nanoconfinement in Single‐Walled Carbon Nanotubes (2022)
Journal Article

We describe the preparation of hybrid redox materials based on polyoxomolybdates encapsulated within single-walled carbon nanotubes (SWNTs). Polyoxomolybdates readily oxidize SWNTs under ambient conditions in solution, and here we study their charge-... Read More about Stabilization of Polyoxometalate Charge Carriers via Redox‐Driven Nanoconfinement in Single‐Walled Carbon Nanotubes.

Stabilization of Polyoxometalate Charge Carriers via Redox‐Driven Nanoconfinement in Single‐Walled Carbon Nanotubes (2022)
Journal Article

We describe the preparation of hybrid redox materials based on polyoxomolybdates encapsulated within single-walled carbon nanotubes (SWNTs). Polyoxomolybdates readily oxidize SWNTs under ambient conditions in solution, and here we study their charge-... Read More about Stabilization of Polyoxometalate Charge Carriers via Redox‐Driven Nanoconfinement in Single‐Walled Carbon Nanotubes.

The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing (2021)
Journal Article

Two-photon polymerisation (2PP) based additive manufacturing has emerged as a powerful technology to fabricate complex three-dimensional micro- and nanoscale architectures. However, a comprehensive understanding of the effect of printing parameters o... Read More about The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing.

Synthesis of ultrathin rhenium disulfide nanoribbons using nano test tubes (2021)
Journal Article

The synthesis of ultrathin rhenium disulfide (ReS2) nanoribbons within single-walled carbon nanotubes (SWNTs) has been established. Dirhenium decacarbonyl complex is encapsulated into the SWNTs to provide a source of confined rhenium atoms, which rea... Read More about Synthesis of ultrathin rhenium disulfide nanoribbons using nano test tubes.

Blurring the Boundary between Homogenous and Heterogeneous Catalysis using Palladium Nanoclusters with Dynamic Surfaces (2021)
Journal Article

Using a magnetron sputtering approach that allows size-controlled formation of nanoclusters, we have created palladium nanoclusters that combine the features of both heterogeneous and homogeneous catalysts. Here we report the atomic structures and el... Read More about Blurring the Boundary between Homogenous and Heterogeneous Catalysis using Palladium Nanoclusters with Dynamic Surfaces.

Effect of Excipients on Salt Disproportionation during Dissolution: A Novel Application of In Situ Raman Imaging (2021)
Journal Article

We have employed a bespoke setup combining confocal Raman microscopy and an ultraviolet–visible (UV–Vis) spectroscopy flow cell to investigate the effect of excipients on the disproportionation kinetics of Pioglitazone HCl (PioHCl) in tablets during... Read More about Effect of Excipients on Salt Disproportionation during Dissolution: A Novel Application of In Situ Raman Imaging.

Retention of perylene diimide optical properties in solid-state materials through tethering to nanodiamonds (2021)
Journal Article

The synthesis of nanodiamond-perylene diimide composites is reported. Suitably hydroxyl-functionalised perylene diimides (PDIs) are reacted with carboxylic acid functionalised nanodiamonds (NDs) through ester formation. The ND-PDI nanocomposite mater... Read More about Retention of perylene diimide optical properties in solid-state materials through tethering to nanodiamonds.

Polaritonic Enhancement of Near-Field Scattering of Small Molecules Encapsulated in Boron Nitride Nanotubes: Chemical Reactions in Confined Spaces (2021)
Journal Article

Nanotubes have been extensively utilized as nanocontainers for molecules and as nanoreactors for chemical reactions in confinement, with the potential for applications in hydrogen storage and catalysis. We show that phonon polaritons of boron nitride... Read More about Polaritonic Enhancement of Near-Field Scattering of Small Molecules Encapsulated in Boron Nitride Nanotubes: Chemical Reactions in Confined Spaces.

Gel-Polymer Electrolytes Based on Poly(Ionic Liquid)/Ionic Liquid Networks (2020)
Journal Article

The use of electrically charged, polymerized ionic liquids (polyILs) offers opportunities for the development of gel-polymer electrolytes (GPEs), but the rational design of such systems is in its infancy. In this work, we compare the properties of po... Read More about Gel-Polymer Electrolytes Based on Poly(Ionic Liquid)/Ionic Liquid Networks.

Inter-Flake Quantum Transport of Electrons and Holes in Inkjet-Printed Graphene Devices (2020)
Journal Article

© 2020 The Authors. Advanced Functional Materials published by Wiley-VCH GmbH 2D materials have unique structural and electronic properties with potential for transformative device applications. However, such devices are usually bespoke structures ma... Read More about Inter-Flake Quantum Transport of Electrons and Holes in Inkjet-Printed Graphene Devices.

A Click Chemistry Strategy for the Synthesis of Efficient Photoinitiators for Two?Photon Polymerization (2020)
Journal Article

It is reported that efficient photoinitiators, suitable for two?photon polymerization, can be obtained using the copper catalyzed azide/alkyne cycloaddition reaction. This click chemistry strategy provides a modular approach to the assembly of photoi... Read More about A Click Chemistry Strategy for the Synthesis of Efficient Photoinitiators for Two?Photon Polymerization.

Metabolic characterisation of Magnetospirillum gryphiswaldense MSR-1 using LC-MS-based metabolite profiling (2020)
Journal Article

Magnetosomes are nano-sized magnetic nanoparticles with exquisite properties that can be used in a wide range of healthcare and biotechnological applications. They are biosynthesised by magnetotactic bacteria (MTB), such as Magnetospirillum gryphiswa... Read More about Metabolic characterisation of Magnetospirillum gryphiswaldense MSR-1 using LC-MS-based metabolite profiling.

Cerium Oxide Nanoparticles Inside Carbon Nanoreactors for Selective Allylic Oxidation of Cyclohexene (2020)
Journal Article

The confinement of cerium oxide (CeO2) nanoparticles within hollow carbon nanostructures has been achieved and harnessed to control the oxidation of cyclohexene. Graphitized carbon nanofibers (GNF) have been used as the nanoscale tubular host and fil... Read More about Cerium Oxide Nanoparticles Inside Carbon Nanoreactors for Selective Allylic Oxidation of Cyclohexene.

An integrated approach to determine interactive genotoxic and global gene expression effects of multiwalled carbon nanotubes (MWCNTs) and benzo[a]pyrene (BaP) on marine mussels: evidence of reverse ‘Trojan Horse’ effects (2019)
Journal Article

The interactions between carbon-based engineered nanoparticles (ENPs) and organic pollutants might enhance the uptake of contaminants into biota. The present integrated study aimed to assess this potential ‘Trojan Horse’, probing the interactive effe... Read More about An integrated approach to determine interactive genotoxic and global gene expression effects of multiwalled carbon nanotubes (MWCNTs) and benzo[a]pyrene (BaP) on marine mussels: evidence of reverse ‘Trojan Horse’ effects.

Host–Guest Hybrid Redox Materials Self‐Assembled from Polyoxometalates and Single‐Walled Carbon Nanotubes (2019)
Journal Article

The development of next‐generation molecular‐electronic, electrocatalytic, and energy‐storage systems depends on the availability of robust materials in which molecular charge‐storage sites and conductive hosts are in intimate contact. It is shown he... Read More about Host–Guest Hybrid Redox Materials Self‐Assembled from Polyoxometalates and Single‐Walled Carbon Nanotubes.

Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting (2019)
Journal Article

Aluminium-based composites reinforced with carbon nanotubes are widely sought for their outstanding metallurgical and structural properties that largely depend on the manufacturing route. In this work, the process-structure-property relationship for... Read More about Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting.

Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior (2019)
Journal Article

Biological structures control cell behavior via physical, chemical, electrical, and mechanical cues. Approaches that allow us to build devices that mimic these cues in a combinatorial way are lacking due to there being no suitable instructive materia... Read More about Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior.

Antagonistic Interactions between Benzo[a]pyrene and Fullerene (C60) in Toxicological Response of Marine Mussels (2019)
Journal Article

© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This study aimed to assess the ecotoxicological effects of the interaction of fullerene (C60) and benzo[a]pyrene (B[a]P) on the marine mussel, Mytilus galloprovincialis. The uptake of nC60, B[... Read More about Antagonistic Interactions between Benzo[a]pyrene and Fullerene (C60) in Toxicological Response of Marine Mussels.

The effect of MgO/TiO2 on structural and crystallization behavior of near invert phosphate-based glasses (2019)
Journal Article

Varying formulations in the glass system of 40P2O5─(24 − x)MgO─(16 + x)CaO─(20 − y)Na2O─yTiO2 (where 0 ≤ x ≤ 22 and y = 0 or 1) were prepared via melt-quenching. The structure of the glasses was confirmed by X-ray diffraction (XRD), Fourier transform... Read More about The effect of MgO/TiO2 on structural and crystallization behavior of near invert phosphate-based glasses.

Direct synthesis of multiplexed metal nanowire based devices using carbon nanotubes as vector templates (2019)
Journal Article

We present the synthesis of metal nanowires in a multiplexed device configuration using single-walled carbon nanotubes (SWNTs) as nanoscale vector templates. The SWNT templates control the dimensionality of the wires, allowing precise control of thei... Read More about Direct synthesis of multiplexed metal nanowire based devices using carbon nanotubes as vector templates.

Water-Based 3D Inkjet Printing of an Oral Pharmaceutical Dosage Form (2019)
Journal Article

Inkjet printing is a form of additive manufacturing where liquid droplets are selectively deposited onto a substrate followed by solidification. The process provides significant potential advantages for producing solid oral dosage forms or tablets, i... Read More about Water-Based 3D Inkjet Printing of an Oral Pharmaceutical Dosage Form.

Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine? (2019)
Journal Article

Formation of soot is a known phenomenon for diesel engines, however, only recently emerged for gasoline engines with the introduction of direct injection systems. Soot-in-oil samples from a three-cylinder turbo-charged gasoline direct injection (GDI)... Read More about Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine?.

Molybdenum dioxide in carbon nanoreactors as a catalytic nanosponge for the efficient desulfurization of liquid fuels (2019)
Journal Article

The principle of a “catalytic nanosponge” that combines the catalysis of organosulfur oxidation and sequestration of the products from reaction mixtures is demonstrated. Group VI metal oxide nanoparticles (CrOx, MoOx, WOx) are embedded within hollow... Read More about Molybdenum dioxide in carbon nanoreactors as a catalytic nanosponge for the efficient desulfurization of liquid fuels.

A low-friction graphene nanoplatelets film from suspension high velocity oxy-fuel thermal spray (2019)
Journal Article

The addition of graphene-based nanomaterials is known to improve the tribology properties of materials by lowering the coefficient of friction and reducing wear. The covering of small areas with thin graphene-based films is routinely carried out; how... Read More about A low-friction graphene nanoplatelets film from suspension high velocity oxy-fuel thermal spray.

Steric and electronic control of 1,3-dipolar cycloaddition reactions in carbon nanotube nanoreactors (2019)
Journal Article

The use of single-walled carbon nanotubes as effective nanoreactors for preparative bimolecular reactions has been demonstrated for the first time. We show that the extreme spatial confinement of guest reactant molecules inside host carbon nanotubes... Read More about Steric and electronic control of 1,3-dipolar cycloaddition reactions in carbon nanotube nanoreactors.

Changes in chemical and ultrastructural composition of ameroid constrictors following in vitro expansion (2018)
Journal Article

Objective To (1) characterise the chemical and ultra-structural composition of ameroid constrictors, at a native state and during in vitro expansion and (2) determine the presence of irritant compounds at the surface or within the bulk of the constr... Read More about Changes in chemical and ultrastructural composition of ameroid constrictors following in vitro expansion.

Clean Block Copolymer Microparticles from Supercritical CO 2 : Universal Templates for the Facile and Scalable Fabrication of Hierarchical Mesostructured Metal Oxides (2018)
Journal Article

© 2018 American Chemical Society. Metal oxide microparticles with well-defined internal mesostructures are promising materials for a variety of different applications, but practical routes to such materials that allow the constituent structural leng... Read More about Clean Block Copolymer Microparticles from Supercritical CO 2 : Universal Templates for the Facile and Scalable Fabrication of Hierarchical Mesostructured Metal Oxides.

Synthesis of hydroxylated group IV metal oxides inside hollow graphitised carbon nanofibers: nano-sponges and nanoreactors for enhanced decontamination of organophosphates (2018)
Journal Article

The confinement and enhanced catalytic properties of hydroxylated group IV metal oxide nanostructures inside hollow graphitised carbon nanofibers (GNF) has been demonstrated. GNF – a structural analogue of carbon nanotubes – were effectively filled w... Read More about Synthesis of hydroxylated group IV metal oxides inside hollow graphitised carbon nanofibers: nano-sponges and nanoreactors for enhanced decontamination of organophosphates.

Movement of palladium nanoparticles in hollow graphitised nanofibres: the role of migration and coalescence in nanocatalyst sintering during the Suzuki–Miyaura reaction (2018)
Journal Article

The evolution of individual palladium nanoparticle (PdNP) catalysts, in graphitised nanofibres (GNF), in the liquid-phase Suzuki-Miyaura (SM) reaction has been appraised. The combination of identical location-transmission electron microscopy (IL-TEM)... Read More about Movement of palladium nanoparticles in hollow graphitised nanofibres: the role of migration and coalescence in nanocatalyst sintering during the Suzuki–Miyaura reaction.

Formation of hollow carbon nanoshells from thiol stabilised silver nanoparticles via heat treatment (2018)
Journal Article

Uniform, less 10?nm sized, hollow carbon nano-shells (HCNS) have been prepared via a single-step, thermal treatment of alkanethiol stabilised Ag nanoparticles (TS-AgNP). Direct evidence for the formation of spherical HCNS from TS-AgNP is provided by... Read More about Formation of hollow carbon nanoshells from thiol stabilised silver nanoparticles via heat treatment.

Comparative nanostructure analysis of gasoline turbocharged direct injection and diesel soot-in-oil with carbon black (2018)
Journal Article

Two gasoline turbocharged direct injection (GTDI) and two diesel soot-in-oil samples were compared with one flame-generated soot sample. High resolution transmission electron microscopy imaging was employed for the initial qualitative assessment of t... Read More about Comparative nanostructure analysis of gasoline turbocharged direct injection and diesel soot-in-oil with carbon black.

Revealing the nature of morphological changes in carbon nanotube-polymer saturable absorber under high-power laser irradiation (2018)
Journal Article

Composites of single-walled carbon nanotubes (SWNTs) and water-soluble polymers (WSP) are the focus of significant worldwide research due to a number of applications in biotechnology and photonics, particularly for ultrashort pulse generation. Despit... Read More about Revealing the nature of morphological changes in carbon nanotube-polymer saturable absorber under high-power laser irradiation.

In situ investigations of the phase change behaviour of tungsten oxide nanostructures (2018)
Journal Article

This study appraises the use of in-situ diffraction and spectroscopy techniques, complemented with ex-situ electron microscopy analyses, to investigate the geometry and phase change behaviour of bundled ultrathin W18O49 nanowires and WO3 nanoparticle... Read More about In situ investigations of the phase change behaviour of tungsten oxide nanostructures.

Development of a SERS strategy to overcome the nanoparticle stabilisation effect in serum-containing samples: Application to the quantification of dopamine in the culture medium of PC-12 cells (2018)
Journal Article

The analysis of serum samples by surface-enhanced Raman spectroscopy (SERS) has gained ground over the last years. However, the stabilisation of colloids by the proteins contained in these samples has restricted their use in common practice, unless a... Read More about Development of a SERS strategy to overcome the nanoparticle stabilisation effect in serum-containing samples: Application to the quantification of dopamine in the culture medium of PC-12 cells.

Morphological Characterisation of Diesel Soot in Oil and the Associated Extraction Dependence (2018)
Conference Proceeding

The size and morphology of soot particles and agglomerates extracted from lubricating oil drawn from the sump of a diesel engine have been investigated and compared using Transmission Electron Microscopy (TEM) and Nanoparticle Tracking Analysis (NTA)... Read More about Morphological Characterisation of Diesel Soot in Oil and the Associated Extraction Dependence.

Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction (2018)
Journal Article

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction (2017)
Journal Article

© 2017 The Author(s). The fabrication of complex three-dimensional gold-containing nanocomposite structures by simultaneous two-photon polymerisation and photoreduction is demonstrated. Increased salt delivers reduced feature sizes down to line width... Read More about Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction.

Dehydrocoupling of dimethylamine-borane promoted by manganese(II) m-terphenyl complexes (2017)
Journal Article

Two- and three-coordinate manganese m-terphenyl complexes are precatalysts for the dehydrogenation of dimethylamine-borane (Me2NH·BH3) affording one equivalent of molecular hydrogen and half an equivalent of [Me2N–BH2]2. Experimental studies into the... Read More about Dehydrocoupling of dimethylamine-borane promoted by manganese(II) m-terphenyl complexes.

Alumina-graphene nanocomposite coatings fabricated by suspension high velocity oxy-fuel thermal spraying for ultra-low-wear (2017)
Journal Article

An alumina coating containing 1 wt.% graphene nanoplatelets (GNPs) is deposited for the first time by suspension high velocity oxy-fuel (SHVOF) thermal spraying – an emerging coating deposition technique. Raman spectroscopy shows the GNPs survive the... Read More about Alumina-graphene nanocomposite coatings fabricated by suspension high velocity oxy-fuel thermal spraying for ultra-low-wear.

A one-pot-one-reactant synthesis of platinum compounds at the nanoscale (2017)
Journal Article

The preparation of inorganic nanomaterials with a desired structure and specific properties requires the ability to strictly control their size, shape and composition. A series of chemical reactions with platinum compounds carried out within the 1.5... Read More about A one-pot-one-reactant synthesis of platinum compounds at the nanoscale.

Growth of Carbon Nanotubes inside Boron Nitride Nanotubes by Coalescence of Fullerenes: Toward the World's Smallest Coaxial Cable (2017)
Journal Article

The use of boron nitride nanotubes as effective nanoscale containers for the confinement and thermal transformations of molecules of C60-fullerene has been demonstrated. The gas-phase insertion of fullerenes into the internal channel of boron nitride... Read More about Growth of Carbon Nanotubes inside Boron Nitride Nanotubes by Coalescence of Fullerenes: Toward the World's Smallest Coaxial Cable.

Stop-frame filming and discovery of reactions at the single-molecule level by transmission electron microscopy (2017)
Journal Article

We report an approach – named chemTEM – to follow chemical transformations at the single-molecule level with the electron beam of a transmission electron microscope (TEM) applied as both a tuneable source of energy and a sub-Angstrom imaging probe. D... Read More about Stop-frame filming and discovery of reactions at the single-molecule level by transmission electron microscopy.

Nanoscale engineering of hybrid magnetite–carbon nanofibre materials for magnetic resonance imaging contrast agents (2017)
Journal Article

Magnetic nanomaterials show significant promise as contrast agents for magnetic resonance imaging (MRI). We have developed a new highly efficient one-step procedure for the synthesis of magnetically- functionalised hollow carbon nanofibres, where (i)... Read More about Nanoscale engineering of hybrid magnetite–carbon nanofibre materials for magnetic resonance imaging contrast agents.

Surface modification of mild steel using a combination of laser and electrochemical processes (2016)
Journal Article

Traditional methods for achieving hierarchical surface structures include highly specified, deterministic approaches to create features to meet design intention. In this study microstructural alteration was undertaken using laser apparatus and second... Read More about Surface modification of mild steel using a combination of laser and electrochemical processes.

Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication (2016)
Journal Article

Three dimensional structures prepared from a gold-polymer composite formulation have been fabricated using multiphoton lithography. In this process, gold nanoparticles were simultaneously formed through photoreduction whilst polymerisation of two pos... Read More about Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication.

Carbon Nanotubes as Electrically Active Nanoreactors for Multi-Step Inorganic Synthesis: Sequential Transformations of Molecules to Nanoclusters and Nanoclusters to Nanoribbons (2016)
Journal Article

In organic synthesis, the composition and structure of products are predetermined by the reaction conditions; however, the synthesis of well-defined inorganic nanostructures often presents a significant challenge yielding non-stoichiometric or polymo... Read More about Carbon Nanotubes as Electrically Active Nanoreactors for Multi-Step Inorganic Synthesis: Sequential Transformations of Molecules to Nanoclusters and Nanoclusters to Nanoribbons.

A sensing mechanism for the detection of carbon nanotubes using selective photoluminescent probes based on ionic complexes with organic dyes (2016)
Journal Article

© 2016 CIOMP. All rights reserved. The multifunctional properties of carbon nanotubes (CNTs) make them a powerful platform for unprecedented innovations in a variety of practical applications. As a result of the surging growth of nanotechnology, nano... Read More about A sensing mechanism for the detection of carbon nanotubes using selective photoluminescent probes based on ionic complexes with organic dyes.

4-Arylbenzenesulfonamides as Human Carbonic Anhydrase Inhibitors (hCAIs): Synthesis by Pd Nanocatalyst-Mediated Suzuki–Miyaura Reaction, Enzyme Inhibition, and X-ray Crystallographic Studies (2016)
Journal Article

Benzenesulfonamides bearing various substituted (hetero)aryl rings in the para-position were prepared by palladium nanoparticle-catalyzed Suzuki–Miyaura cross-coupling reactions and evaluated as human carbonic anhydrase (hCA, EC 4.2.1.1) inhibitors a... Read More about 4-Arylbenzenesulfonamides as Human Carbonic Anhydrase Inhibitors (hCAIs): Synthesis by Pd Nanocatalyst-Mediated Suzuki–Miyaura Reaction, Enzyme Inhibition, and X-ray Crystallographic Studies.

Palladium nanoparticles in catalytic carbon nanoreactors: the effect of confinement on Suzuki-Miyaura reactions (2015)
Journal Article

We explore the construction and performance of a range of catalytic nanoreactors based on palladium nanoparticles encapsulated in hollow graphitised nanofibres. The optimum catalytic material, with small palladium nanoparticles located almost exclusi... Read More about Palladium nanoparticles in catalytic carbon nanoreactors: the effect of confinement on Suzuki-Miyaura reactions.

Evaluating the effects of carbon nanoreactor diameter and internal structure on the pathways of the catalytic hydrosilylation reaction (2014)
Journal Article

Three different types of carbon nanoreactors, double-walled nanotubes (DWNT), multi-walled nanotubes (MWNT) and graphitised carbon nanofibers (GNF) have been appraised for the first time as containers for the reactions of phenylacetylene hydrosilylat... Read More about Evaluating the effects of carbon nanoreactor diameter and internal structure on the pathways of the catalytic hydrosilylation reaction.

Palladium nanoparticles on carbon nanotubes as catalysts of cross-coupling reactions (2013)
Journal Article

The macroscopic properties of composite nanotube-nanoparticle superstructures are determined by a complex interplay of structural parameters at the nanoscale. The catalytic performance of different carbon nanotube-palladium nanoparticle catalysts, wh... Read More about Palladium nanoparticles on carbon nanotubes as catalysts of cross-coupling reactions.

Click chemistry in carbon nanoreactors (2012)
Journal Article

Copper-nanoparticle catalytic centres anchored at the 5 graphitic step-edges within hollow carbon nanoreactors exhibit superior activity and stability in cycloaddition reactions as compared to catalytic centres outside the nanoreactors. Nanoscale con... Read More about Click chemistry in carbon nanoreactors.