All Outputs (170)

Rectangular and Random Conductors: AC Losses Evaluations and Manufacturing Considerations (2020)
Conference Proceeding

This paper presents a comparison between hairpin and random distributed winding in electrical machines for automotive applications. Indeed, the overall performance of an electrical drive system is seriously affected by its winding design. The conside... Read More about Rectangular and Random Conductors: AC Losses Evaluations and Manufacturing Considerations.

Multiphase fault tolerant distributed control techniques for integrated drives based on resonant regulators (2020)
Conference Proceeding

One of the challenges brought forward by the gradual electrification undertaken by the aviation sector is the requirement of fault tolerance for machine drive systems to be used for critical on-board tasks such as propulsion or primary flight surface... Read More about Multiphase fault tolerant distributed control techniques for integrated drives based on resonant regulators.

Weibull Distribution and Geometrical Size Factor for Evaluating the Thermal Life of Electrical Machines' Insulation (2020)
Conference Proceeding

© 2020 IEEE. The thermal lifetime assessment of electrical machines' insulation systems is generally performed at the design and prototyping stages. Hence, the insulation system's thermal endurance curve (or temperature index) can be extrapolated, al... Read More about Weibull Distribution and Geometrical Size Factor for Evaluating the Thermal Life of Electrical Machines' Insulation.

Finite Control Set Model Predictive Control of Isolated DC/DC Modular Multilevel Converter (2020)
Conference Proceeding

© 2020 IEEE. Isolated DC/DC modular multilevel converters (MMC) consisting of two MMCs isolated by a transformer are one of the converter topologies being considered used for DC/DC conversion in HVDC transmission. Two level modulation can be used to... Read More about Finite Control Set Model Predictive Control of Isolated DC/DC Modular Multilevel Converter.

Assessing the forced labor risk of US fruit and vegetable commodities (2020)
Conference Proceeding

Studies on sustainable food consumption to date have largely focused on promoting human health within ecological limits. Much less attention has been paid to social sustainability, in part because of limited data and models. The aim of this research... Read More about Assessing the forced labor risk of US fruit and vegetable commodities.

Influence of Airgap Length on Performance of High Power PM-Assisted Syn-Rel Machines (2020)
Conference Proceeding

In recent years, synchronous reluctance (Syn-Rel) machines are research hotspots in variable speed motor drives due to their robust rotor structure and wide constant power speed range (CPSR). More practically, when kVA limitation is considered, embed... Read More about Influence of Airgap Length on Performance of High Power PM-Assisted Syn-Rel Machines.

Analysis of a Five-Phase PM Vernier Machine Topology with Two-Slot Pitch Winding (2020)
Conference Proceeding

This paper presents a five-phase permanent magnet (PM) vernier machine topology equipped with a two-slot pitch winding. The two-slot pitch winding provides a trade-off between fractional slots concentrated winding (FSCW) and integrated slot distribut... Read More about Analysis of a Five-Phase PM Vernier Machine Topology with Two-Slot Pitch Winding.

Enhancing Learning Capabilities of Movement Primitives under Distributed Probabilistic Framework for Assembly Tasks (2020)
Conference Proceeding

This paper presents a novel distributed probabilistic framework based on movement primitives for flexible robots assembly implementation. Since modern advanced industrial cell usually deals with various tasks that are not fixed via-point trajectories... Read More about Enhancing Learning Capabilities of Movement Primitives under Distributed Probabilistic Framework for Assembly Tasks.

Disturbance Rejection Ability Enhancement Using Repetitive Observer in Phase-locked Loop for More Electric Aircraft (2020)
Conference Proceeding

Under the concept of transportation electrification, more electric aircraft (MEA) involves more electrical energy to reduce emissions. Phase-looked loops (PLLs) have been well developed for synchronizing different power sources in a grid. Since MEA o... Read More about Disturbance Rejection Ability Enhancement Using Repetitive Observer in Phase-locked Loop for More Electric Aircraft.

Sensorless Cascaded-Model Predictive Control applied to a Doubly Fed Induction Machine (2020)
Conference Proceeding

This paper proposes a sensorless cascaded model predictive control strategy applied to a doubly-fed induction machine. This technique is based on an improved stator flux estimator, and an extended Kalman filter to control encoder-less and independent... Read More about Sensorless Cascaded-Model Predictive Control applied to a Doubly Fed Induction Machine.

Control of a Dual Fed Open End Winding SPMSM with a Floating Capacitor (2020)
Conference Proceeding

Surface Permanent Magnet Synchronous Motor (SPMSM) are not the first choice when a motor drive is required to operate over a wide speed range with an extended Constant Power Speed Range (CPSR). Nevertheless, SPMSMs offer high torque density, high eff... Read More about Control of a Dual Fed Open End Winding SPMSM with a Floating Capacitor.

AC-DC Isolated Matrix Converter Charger: Topology and Modulation (2020)
Conference Proceeding

This paper presents the modulation strategy for the 25 kW AC-DC isolated Matrix Charger three-phase rectifier (MCharger). The proposed topology allows current and voltage regulation for energy storage devices such as EVs batteries. Compared to a stan... Read More about AC-DC Isolated Matrix Converter Charger: Topology and Modulation.

Evidence of Nanoparticle Migration in Polymeric Hybrid Memristor Devices (2020)
Conference Proceeding

We report evidence of possible migration of metal nanoparticles in nanoparticle-polymer memristor devices. In bi-layer devices, having a bottom layer containing a mixed nanoparticle polymer blend and a top layer of just the polymer, the light emissio... Read More about Evidence of Nanoparticle Migration in Polymeric Hybrid Memristor Devices.

Aerosol Jet Printed Micropillar Electrodes For Biophotovoltaics (2020)
Conference Proceeding

There is growing interest in immobilizing oxygenic photosynthetic microorganisms, such as algae and cyanobacteria, onto electrodes to convert solar energy to electricity. This process forms the basis of biophotovoltaics (BPV)[1]. Previous research h... Read More about Aerosol Jet Printed Micropillar Electrodes For Biophotovoltaics.

SISO Control Strategy of Resonant Dual Active Bridge with a Tuned CLC Network (2020)
Conference Proceeding

This paper proposed a linear state-space model for a resonant dual active bridge with a tuned capacitor-inductor-capacitor network which is applied to an energy storage system. The proposed model is used for predicting the behavior of the proposed sy... Read More about SISO Control Strategy of Resonant Dual Active Bridge with a Tuned CLC Network.

Experimental Hybrid AC/DC-Microgrid Prototype for Laboratory Research (2020)
Conference Proceeding

This paper describes a flexible testbed of a hybrid AC/DC microgrid developed for research purposes. The experimental setup is composed of 3 AC and 6 DC distributed generator units which are emulated by using three-legs inverters and settable output... Read More about Experimental Hybrid AC/DC-Microgrid Prototype for Laboratory Research.

Hybris and Sophrosyne on the Amazon Sarcophagus from Tarquinia (2020)
Conference Proceeding

Power Quality Analysis (0-2kHz) in DC/DC Converters under Steady State and Transient Conditions (2020)
Conference Proceeding

The aim of this paper is to understand the effects of low frequency (0-2kHz) conducted emissions on power quality from a microgrid based DC/DC converter under steady state and transient loading conditions. The experimental data obtained from the lab... Read More about Power Quality Analysis (0-2kHz) in DC/DC Converters under Steady State and Transient Conditions.

An Open Source, FPGA-Based Bit Error Ratio Tester for Serial Communications (2020)
Conference Proceeding

This paper discusses the design of a FPGA-based Bit Error Ratio (BER) measurement system in a serial communication link under electromagnetic emissions. The BER measurement is an important figure for the reliability of digital communication systems.... Read More about An Open Source, FPGA-Based Bit Error Ratio Tester for Serial Communications.

Data Links Modelling under Radiated EMI and its Impact on Sampling Errors in the Physical Layer (2020)
Conference Proceeding

This paper deals with the effects of radiated EMI on serial communication links using software modelling with particular emphasis on the physical layer. The effect of EMI in data links is an important problem to solve in many harsh environments such... Read More about Data Links Modelling under Radiated EMI and its Impact on Sampling Errors in the Physical Layer.