All Outputs (822)

Enhancing electromagnetic launch capability: design of a small launch system for large UAVs (2017)
Conference Proceeding
Cox, T., Yang, T., & Gerada, C. (2017). Enhancing electromagnetic launch capability: design of a small launch system for large UAVs.

Unmanned Aerial Vehicles (UAVs) play a critical and increasing role in modern combat, giving significantly enhanced surveillance, communication and strike capabilities. There are currently a large range of UAV’s available, but in general the more cap... Read More about Enhancing electromagnetic launch capability: design of a small launch system for large UAVs.

Comparative study of permanent magnet-synchronous and permanent magnet-flux switching machines for high torque to inertia applications (2017)
Conference Proceeding
Al-Timimy, A., Giangrande, P., Degano, M., Galea, M., & Gerada, C. (2017). Comparative study of permanent magnet-synchronous and permanent magnet-flux switching machines for high torque to inertia applications. In Proceedings - 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (45-51). https://doi.org/10.1109/WEMDCD.2017.7947722

This paper investigates the capability of both permanent magnet synchronous machine (PMSM) and permanent magnet flux switching (PMFS) machine to provide high torque to inertia ratio for applications with demanding response in terms of acceleration an... Read More about Comparative study of permanent magnet-synchronous and permanent magnet-flux switching machines for high torque to inertia applications.

Design optimization of integrated rotor-less inductors for high-speed AC drive applications (2017)
Conference Proceeding
Raza Khowja, M., Gerada, C., Vakil, G., Patel, C., & Wheeler, P. (in press). Design optimization of integrated rotor-less inductors for high-speed AC drive applications. In 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (69-74)

Discrete sub-system due to passive elements in motor drive require functional and structural integration to make efficient and power dense overall system. Such power dense system is the prerequisite in aerospace and marine applications. This paper pr... Read More about Design optimization of integrated rotor-less inductors for high-speed AC drive applications.

Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators (2017)
Conference Proceeding
Wang, Y., Vakil, G., Nuzzo, S., Degano, M., Galea, M., Gerada, C., …Brown, N. (2017). Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators. In Proceedings - 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (163-168). https://doi.org/10.1109/WEMDCD.2017.7947741

Objective of this paper is to provide design recommendations to improve the performance and power density of a 400kVA salient-pole synchronous generator, without exceeding the limitations due to critical parameters such as total harmonic distortion o... Read More about Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators.

Power quality improvement by pre-computed modulated field current for synchronous generators (2017)
Conference Proceeding
Fallows, D., Nuzzo, S., Costabeber, A., & Galea, M. (2017). Power quality improvement by pre-computed modulated field current for synchronous generators. In 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (127-131). https://doi.org/10.1109/WEMDCD.2017.7947735

Although power quality aspects of electrical machines have been extensively studied and investigated for a large number of years, room for improvement still exists in the field of classic, wound-field, synchronous generators. This paper proposes an i... Read More about Power quality improvement by pre-computed modulated field current for synchronous generators.

Analysis of salient-pole synchronous generators operating in single-phase condition (2017)
Conference Proceeding
Spagnolo, C., Nuzzo, S., Serra, G., Gerada, C., & Galea, M. (2017). Analysis of salient-pole synchronous generators operating in single-phase condition. In 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (33-38). https://doi.org/10.1109/WEMDCD.2017.7947720

The power generation industry has recently started to invest interest and focus on the single-phase operation of traditional three-phase, wound-field, synchronous generators. This is partially due to a combination of customer requirements and the nee... Read More about Analysis of salient-pole synchronous generators operating in single-phase condition.

uCube: Control platform for power electronics (2017)
Conference Proceeding
Galassini, A., Lo Calzo, G., Formentini, A., Gerada, C., Zanchetta, P., & Costabeber, A. (2017). uCube: Control platform for power electronics. In Proceedings - 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (216-221). https://doi.org/10.1109/WEMDCD.2017.7947749

This paper presents a versatile tool for development, control and testing of power electronics converters. In the last decade, many different expensive off-the-shelf tools for rapid prototyping and testing have been developed and commercialised by fe... Read More about uCube: Control platform for power electronics.

Stability boundary analysis in single-phase grid-connected inverters with PLL by LTP theory (2017)
Journal Article
Salis, V., Costabeber, A., Cox, S. M., Zanchetta, P., & Formentini, A. (2018). Stability boundary analysis in single-phase grid-connected inverters with PLL by LTP theory. IEEE Transactions on Power Electronics, 33(5), 4023-4036. https://doi.org/10.1109/TPEL.2017.2714860

Stability analysis of power converters in AC net¬works is complex due to the non-linear nature of the conversion systems. Whereas interactions of converters in DC networks can be studied by linearising about the operating point, the extension of the... Read More about Stability boundary analysis in single-phase grid-connected inverters with PLL by LTP theory.

Stability Assessment of Power-Converter-Based AC systems by LTP Theory: Eigenvalue Analysis and Harmonic Impedance Estimation (2017)
Journal Article
Salis, V., Costabeber, A., Cox, S. M., & Zanchetta, P. (2017). Stability Assessment of Power-Converter-Based AC systems by LTP Theory: Eigenvalue Analysis and Harmonic Impedance Estimation. IEEE Journal of Emerging and Selected Topics in Power Electronics, 5(4), 1513-1525. https://doi.org/10.1109/jestpe.2017.2714026

Stability analysis of power-converter-based AC systems poses serious challenges not only because of the non-linear nature of power converters, but also because linearisation is not generally applied around a steady-state operating point, as in the DC... Read More about Stability Assessment of Power-Converter-Based AC systems by LTP Theory: Eigenvalue Analysis and Harmonic Impedance Estimation.

Predicting harmonic distortion of multiple converters in a power system (2017)
Journal Article
Ivry, P. M., Oke, O. A., Thomas, D. W. P., & Sumner, M. (2017). Predicting harmonic distortion of multiple converters in a power system. Journal of Electrical and Computer Engineering, 2017, 1-10. https://doi.org/10.1155/2017/7621413

Various uncertainties arise in the operation and management of power systems containing Renewable Energy Sources (RES) that affect the systems power quality. These uncertainties may arise due to system parameter changes or design parameter choice. In... Read More about Predicting harmonic distortion of multiple converters in a power system.

Highly-integrated power cell for high-power wide band-gap power converters (2017)
Conference Proceeding
Espina, J., Ahmadi, B., Empringham, L., De Lillo, L., & Johnson, C. M. (2017). Highly-integrated power cell for high-power wide band-gap power converters.

The fast switching speeds and low specific conduction losses of wide band-gap semiconductors allow the realisation of high-frequency, high power-density switching converters with dramatically reduced passive component requirements compared to Silicon... Read More about Highly-integrated power cell for high-power wide band-gap power converters.

Control Design and Voltage Stability Analysis of a Droop-Controlled Electrical Power System for More Electric Aircraft (2017)
Journal Article
Gao, F., Bozhko, S., Costabeber, A., Asher, G., & Wheeler, P. (2017). Control Design and Voltage Stability Analysis of a Droop-Controlled Electrical Power System for More Electric Aircraft. IEEE Transactions on Industrial Electronics, 64(12), 9271-9281. https://doi.org/10.1109/TIE.2017.2711552

This paper focuses on the analysis of a single DC bus multi-generator Electrical Power System (EPS) for future More Electric Aircrafts (MEA). Within such a single bus paradigm, the paper proposes a detailed control design procedure and provides a sta... Read More about Control Design and Voltage Stability Analysis of a Droop-Controlled Electrical Power System for More Electric Aircraft.

Arm-Balancing Control and Experimental Validation of a Grid-Connected MMC With Pulsed DC Load (2017)
Journal Article
Jankovic, M., Costabeber, A., Watson, A. J., & Clare, J. C. (2017). Arm-Balancing Control and Experimental Validation of a Grid-Connected MMC With Pulsed DC Load. IEEE Transactions on Industrial Electronics, 64(12), 9180-9190. https://doi.org/10.1109/TIE.2017.2711516

This paper focuses on the operation of a grid connected Modular Multilevel Converter (MMC) supplying a pulsed DC load. The goal is to achieve minimum AC power fluctuation despite the high power fluctuation present on the DC side. The MMC has been sel... Read More about Arm-Balancing Control and Experimental Validation of a Grid-Connected MMC With Pulsed DC Load.

Design optimization of a short-term duty electrical machine for extreme environment (2017)
Journal Article
Arumugam, P., Amankwah, E. K., Walker, A., & Gerada, C. (2017). Design optimization of a short-term duty electrical machine for extreme environment. IEEE Transactions on Industrial Electronics, 64(12), 9784-9794. https://doi.org/10.1109/TIE.2017.2711555

This paper presents design optimisation of a short term duty electrical machine for extreme environments of high temperature and high altitudes. For such extreme environmental conditions of above 80⁰C and altitudes of 30km, thermal loading limits are... Read More about Design optimization of a short-term duty electrical machine for extreme environment.

Design and construction of a co-planar power bus interconnect for low inductance switching (2017)
Conference Proceeding
Lin, X., Li, J., & Johnson, M. (2017). Design and construction of a co-planar power bus interconnect for low inductance switching. In 2017 IEEE International Workshop On Integrated Power Packaging (IWIPP) (1-4). https://doi.org/10.1109/IWIPP.2017.7936755

A co-planar tab-slot type of interconnect demonstrator for connecting power switching devices and DC bus capacitors has been designed and constructed, aimed at low inductance switching. The demonstrator is composed of a double-sided tab connector and... Read More about Design and construction of a co-planar power bus interconnect for low inductance switching.

A novel multi-modular series HVDC tap (2017)
Conference Proceeding
Tang, Y., Watson, A., Wheeler, P., Farr, E., & Feldman, R. (2017). A novel multi-modular series HVDC tap. In 13th IET International Conference on AC and DC Power Transmission (ACDC 2017) (1-6). https://doi.org/10.1049/cp.2017.0044

Tapping energy from a HVDC transmission line to serve small remote communities has been considered by researchers and HVDC manufacturers since the 1960s. Many HVDC taps proposed consider the performance of diodes, Thyristors and GTOs and the utilizat... Read More about A novel multi-modular series HVDC tap.

Influence of gate bias on the avalanche ruggedness of SiC power MOSFETs (2017)
Conference Proceeding
Fayyaz, A., Castellazzi, A., Romano, G., Riccio, M., Urresti, J., & Wright, N. (2017). Influence of gate bias on the avalanche ruggedness of SiC power MOSFETs.

This paper investigates the effect of negative gate bias voltage (VGS) on the avalanche breakdown robustness of commercial state-of-the-art silicon carbide (SiC) power MOSFETs. The device’s ability to withstand energy dissipation during avalanche reg... Read More about Influence of gate bias on the avalanche ruggedness of SiC power MOSFETs.

A fractional slot multiphase air-core compulsator with concentrated winding (2017)
Journal Article
Zhao, W., Wu, S., Cui, S., Gerada, C., Zhang, H., & Xu, Z. (2017). A fractional slot multiphase air-core compulsator with concentrated winding. IEEE Transactions on Plasma Science, 45(7), 1387-1393. https://doi.org/10.1109/TPS.2017.2705243

Compulsator is a specially designed generator capa¬ble of delivering high current pulses to a low-impedance load, such as the electromagnetic railgun. In order to increase the tip speed of the rotor, advanced composite materials have been used in the... Read More about A fractional slot multiphase air-core compulsator with concentrated winding.

DC-Link Capacitor Second Carrier Band Switching Harmonic Current Reduction in Two-Level Back-to-Back Converters (2017)
Journal Article
Shen, L., Bozhko, S., Hill, C. I., & Wheeler, P. (2018). DC-Link Capacitor Second Carrier Band Switching Harmonic Current Reduction in Two-Level Back-to-Back Converters. IEEE Transactions on Power Electronics, 33(4), 3567-3574. https://doi.org/10.1109/TPEL.2017.2706972

© 1986-2012 IEEE. This paper proposes an active switching harmonic current reduction method within the dc-link capacitor of two-level, three-phase, back-to-back converters. This method is based on the derived analytical solution for switching harmoni... Read More about DC-Link Capacitor Second Carrier Band Switching Harmonic Current Reduction in Two-Level Back-to-Back Converters.

Preselection algorithm based on predictive control for direct matrix converter (2017)
Journal Article
Dan, H., Zhu, Q., Peng, T., Yao, S., & Wheeler, P. (2017). Preselection algorithm based on predictive control for direct matrix converter. IET Electric Power Applications, 11(5), 768-775. https://doi.org/10.1049/iet-epa.2016.0473

This paper presents an enhanced predictive control strategy to reduce the calculation effort for direct matrix converters. The main idea is to preselect the switching states to decrease the calculation effort during each sample period. The proposed p... Read More about Preselection algorithm based on predictive control for direct matrix converter.