All Outputs (22)

A Review of Carbon Emissions from Electrical Machine Materials (2024)
Journal Article

As the world embarks on a global mission to tackle climate change, reducing carbon represents a key challenge given the escalating global warming. The U.K. is among many other nations that are determined to decarbonise all sectors and strive to achie... Read More about A Review of Carbon Emissions from Electrical Machine Materials.

Analytical Calculation and Experimental Validation of Litz Wires Axial Thermal Conductivity (2023)
Journal Article

Litz wires are widely used in electrical machines with reduced AC losses, compared to traditional random winding. The reduced AC losses can improve both electrical machines electromagnetic performance, such as efficiency and thermal performance. Ther... Read More about Analytical Calculation and Experimental Validation of Litz Wires Axial Thermal Conductivity.

Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction (2022)
Journal Article

Synchronous reluctance (Syn-Rel) machines with embedded permanent magnets (PMs) are research hotspots in variable speed motor drives due to their robust rotor structure and wide constant power speed range (CPSR). In this paper, the potential of PM-as... Read More about Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction.

Performance Entitlement by Using Novel High Strength Electrical Steels and Copper Alloys for High-Speed Laminated Rotor Induction Machines (2022)
Journal Article

The laminated rotor Induction Machine (IM), with its simple construction and manufacturing, robustness, ease of control and comparatively lower cost remains by far the most utilized electromechanical energy converter. At very high speeds, traditional... Read More about Performance Entitlement by Using Novel High Strength Electrical Steels and Copper Alloys for High-Speed Laminated Rotor Induction Machines.

Improved Thermal Modeling and Experimental Validation of Oil-Flooded High-Performance Machines with Slot-Channel Cooling (2021)
Journal Article

Thermal management is often considered a bottleneck in the pursuit of the next-generation electrical machines for electrified transportation with a step change in power density. Slot-channel cooling is considered to be an effective cooling technique,... Read More about Improved Thermal Modeling and Experimental Validation of Oil-Flooded High-Performance Machines with Slot-Channel Cooling.

Electrical Machine Slot Thermal Condition Effects on Back Iron Extension Thermal Benefits (2021)
Journal Article

The slot thermal condition is critical for thermal management of high-performance electrical machines, due to the high heat losses and poor heat transfer ability within the slot. With a part of the back iron projected radially downward into the slot,... Read More about Electrical Machine Slot Thermal Condition Effects on Back Iron Extension Thermal Benefits.

4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft (2021)
Journal Article

This article describes the underpinning research, development, construction, and testing of a 4-MW multithree phase generator designed for a hybrid-electric aircraft propulsion system demonstrator. The aim of the work is to demonstrate gravimetric po... Read More about 4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft.

A Thermal Modelling Approach and Experimental Validation for an Oil Spray-Cooled Hairpin Winding Machine (2021)
Journal Article

Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation (2020)
Journal Article

In this article, we describe the research and development of a 3 kV active rectifier for a 4 MW aerospace generator drive system demonstrator. The converter is fed by a multiphase high-speed/high-frequency permanent magnet generator. The main aim of... Read More about Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation.

Slot Number Thermal Effects on Electrical Machines (2020)
Journal Article

Experimental study of thermal fracturing of Hot Dry Rock irradiated by moving laser beam: Temperature, efficiency and porosity (2020)
Journal Article

A new laser irradiation fracturing method is employed to crack the Hot Dry Rock (HDR) and variations of rock temperature, specific energy (SE) and modified specific energy (MSE), thermal damages and open porosity of granite samples caused by moving l... Read More about Experimental study of thermal fracturing of Hot Dry Rock irradiated by moving laser beam: Temperature, efficiency and porosity.

Analytical Model of Modular Spoke-Type Permanent Magnet Machines for In-Wheel Traction Applications (2020)
Journal Article

This paper proposes an analytical model of modular spoke-type permanent magnet (MSTPM) machines based on air-gap field modulation (AFM) theory. Firstly, a fundamental AFM model of open-circuit MSTPM machines is introduced. The open-circuit air-gap fi... Read More about Analytical Model of Modular Spoke-Type Permanent Magnet Machines for In-Wheel Traction Applications.

Thermal Model Approach to Multisector Three-Phase Electrical Machines (2020)
Journal Article

© 1982-2012 IEEE. Multisector machines reveal a high fault-tolerant capability, since failure events can be isolated by de-energizing the faulty sector, while the healthy ones contribute in delivering the required power. This article is focused on th... Read More about Thermal Model Approach to Multisector Three-Phase Electrical Machines.

Reduction of Winding AC Losses by Accurate Conductor Placement in High Frequency Electrical Machines (2019)
Journal Article

© 1972-2012 IEEE. In the design of electrical machines, the increase in power density has become one of the main research themes. With most of the power loss in high power density electrical machines often being generated in the stator winding assemb... Read More about Reduction of Winding AC Losses by Accurate Conductor Placement in High Frequency Electrical Machines.

Effective Thermal Conductivity Calculation and Measurement of Litz Wire based on the Porous Metal Materials Structure (2019)
Journal Article

Litz wires are employed in high-frequency electrical machines due to their advantages of reducing the ac losses, including minimizing the skin effect and the proximity effect. In order to improve the reliability of such machines, and enable accurate... Read More about Effective Thermal Conductivity Calculation and Measurement of Litz Wire based on the Porous Metal Materials Structure.

Numerical investigations of convective phenomena of oil impingement on end-windings (2019)
Journal Article

A novel experimental rig for analysing intensive liquid cooling of highly power-dense electrical machine components has been developed. Coupled fluid flow and heat transfer have been modelled, using computational fluid dynamics (CFD), to inform the d... Read More about Numerical investigations of convective phenomena of oil impingement on end-windings.

Back-Iron Extension Thermal Benefits for Electrical Machines With Concentrated Windings (2019)
Journal Article

Dynamic response of hybrid carbon fibre laminate beams under ballistic impact (2018)
Journal Article

This novel hybrid fibre composites combining stiff composites with soft composites are developed to improve the ballistic impact resistance of composite beams while maintaining good quasi-static loading bearing capacity. The ballistic impact performa... Read More about Dynamic response of hybrid carbon fibre laminate beams under ballistic impact.

Development of aircraft electric starter-generator system based-on active rectification technology (2018)
Journal Article

More-electric aircraft (MEA) has become a dominant trend for modern aircraft. On-board MEA, many functions, which are conventionally driven by pneumatic and hydraulic power, are replaced with electrical subsystems. Starting aircraft engines with an e... Read More about Development of aircraft electric starter-generator system based-on active rectification technology.

Design and losses analysis of a high power density machine for flooded pump applications (2018)
Journal Article

This paper describes the design process of a 10 kW 19000 rpm high power density surface mounted permanent magnet synchronous machine for a directly coupled pump application. In order to meet the required specifications, a compact machine, with coolin... Read More about Design and losses analysis of a high power density machine for flooded pump applications.