All Outputs (15)

Improved Reliability of Planar Power Interconnect With Ceramic-Based Structure (2017)
Journal Article

This paper proposes an advanced Si3N4 ceramic-based structure with through vias designed and filled with brazing alloy as a reliable interconnect solution in planar power modules. Finite element (FE) modeling and simulation were first used to predict... Read More about Improved Reliability of Planar Power Interconnect With Ceramic-Based Structure.

A study on probability of distribution loads based on expectation maximization algorithm (2017)
Conference Proceeding

In a distribution power network, the load model has no certain pattern or predicted behaviour due to large range of data and changes in energy consumption for end-user consumers. Thus, a powerful analysis based on probabilistic structure is required.... Read More about A study on probability of distribution loads based on expectation maximization algorithm.

Time-Efficient Sintering Processes to Attach Power Devices Using Nanosilver Dry Film (2017)
Journal Article

Pressure-assisted sintering processes to attach power devices using wet nanosilver pastes with time scales of minutes to a few hours have been widely reported. This paper presents our work on time-efficient sintering, using nanosilver dry film and an... Read More about Time-Efficient Sintering Processes to Attach Power Devices Using Nanosilver Dry Film.

Characterisation and modelling of gallium nitride power semiconductor devices dynamic on-state resistance (2017)
Journal Article

GaN-HEMTs suffer from trapping effects which increases device ON-state resistance (RDS(on)) above its theoretical value. This increase is a function of the applied DC bias when the device is in its OFF state, and the time which the device is biased f... Read More about Characterisation and modelling of gallium nitride power semiconductor devices dynamic on-state resistance.

Design and development of a high-density, high-speed 10 kV SiC MOSFET module (2017)
Conference Proceeding

High-density packaging of fast-switching power semiconductors typically requires low parasitic inductance, high heat extraction, and high thermo-mechanical reliability. High-density packaging of high-voltage power semiconductors, such as 10 kV SiC MO... Read More about Design and development of a high-density, high-speed 10 kV SiC MOSFET module.

A new analysis for finding the optimum power rating of low voltage distribution power electronics based on statistics and probabilities (2017)
Conference Proceeding

The continuing trend toward heavier load and high penetration of Distribution Generation (DG) units in low voltage rural distribution feeders requires power electronic-based solution alternatives for voltage regulation purposes. The design of power e... Read More about A new analysis for finding the optimum power rating of low voltage distribution power electronics based on statistics and probabilities.

SiC/GaN power semiconductor devices: a theoretical comparison and experimental evaluation under different switching conditions (2017)
Journal Article

The conduction and switching losses of SiC and GaN power transistors are compared in this paper. Voltage rating of commercial GaN power transistors is less than 650V while that of SiC power transistors is less than 1200V. The paper begins with a theo... Read More about SiC/GaN power semiconductor devices: a theoretical comparison and experimental evaluation under different switching conditions.

Using multi time-scale electro-thermal simulation approach to evaluate SiC-MOSFET power C=converter in virtual prototyping design tool (2017)
Conference Proceeding

Using virtual prototyping (VP) design tool to eval¬uate power converter electro-thermal performance can help designers to validate prototype in a quick way. However, different system time-scale requires efficient electro-thermal simulation techniques... Read More about Using multi time-scale electro-thermal simulation approach to evaluate SiC-MOSFET power C=converter in virtual prototyping design tool.

Time-efficient sintering processes to attach power devices using nanosilver dry film (2017)
Journal Article

Pressure-assisted sintering processes to attach power devices using wet nanosilver pastes with time scales of minutes to a few hours have been widely reported. This paper presents our work on time-efficient sintering, using nanosilver dry film and an... Read More about Time-efficient sintering processes to attach power devices using nanosilver dry film.

Highly-integrated power cell for high-power wide band-gap power converters (2017)
Conference Proceeding

The fast switching speeds and low specific conduction losses of wide band-gap semiconductors allow the realisation of high-frequency, high power-density switching converters with dramatically reduced passive component requirements compared to Silicon... Read More about Highly-integrated power cell for high-power wide band-gap power converters.

Design and construction of a co-planar power bus interconnect for low inductance switching (2017)
Conference Proceeding

A co-planar tab-slot type of interconnect demonstrator for connecting power switching devices and DC bus capacitors has been designed and constructed, aimed at low inductance switching. The demonstrator is composed of a double-sided tab connector and... Read More about Design and construction of a co-planar power bus interconnect for low inductance switching.

A Physical RC Network Model for Electrothermal Analysis of a Multichip SiC Power Module (2017)
Journal Article

© 2017 IEEE. This paper is concerned with the thermal models which can physically reflect the heat-flow paths in a lightweight three-phase half-bridge two-level SiC power module with six MOSFETs and can be used for coupled electrothermal simulation.... Read More about A Physical RC Network Model for Electrothermal Analysis of a Multichip SiC Power Module.

Interconnect materials enabling IGBT modules to achieve stable short circuit failure behavior (2017)
Journal Article

Insulated gate bipolar transistor (IGBT) modules, which can fail to stable short-circuit mode, have major applications in electricity network-related fields. Sn-3.5Ag solder joints and sintered Ag joints for the die attachment and Mo, Cu, Sn-3.5Ag, A... Read More about Interconnect materials enabling IGBT modules to achieve stable short circuit failure behavior.

Suppression of electromagnetic interference using screening and shielding techniques within switching cells (2017)
Conference Proceeding

in this paper we introduce the use of combination of screening and shielding to suppress electromagnetic interference (EMI) generated by a switching cell. We investigate the screening of common mode (CM) currents and the shielding of magnetic fields... Read More about Suppression of electromagnetic interference using screening and shielding techniques within switching cells.

In-Service Diagnostics for Wire-Bond Lift-off and Solder Fatigue of Power Semiconductor Packages (2017)
Journal Article

Wire-bond lift-off and Solder fatigue are degradation mechanisms that dominate the lifetime of power semiconductor packages. Although their lifetime is commonly estimated at the design stage, based on mission profiles and Physics-of-Failure models, t... Read More about In-Service Diagnostics for Wire-Bond Lift-off and Solder Fatigue of Power Semiconductor Packages.