All Outputs (334)

Sensorless Control of a Fault-tolerant Multi-level PMSM Drive (2018)
Journal Article
Saleh, K., & Sumner, M. (2018). Sensorless Control of a Fault-tolerant Multi-level PMSM Drive. TELKOMNIKA (Telecommunication, Computing, Electronics and Control), 16(6), 2930-2942

This paper presents a new technique to track the saliency position in a permanent magnet synchronous motor (PMSM) post a single phase open-circuit fault. The PMSM is driven by a fault-tolerant multi-level inverter that is utilized to implement a faul... Read More about Sensorless Control of a Fault-tolerant Multi-level PMSM Drive.

Bond behavior degradation between FRP and masonry under aggressive environmental conditions (2018)
Journal Article
Ramirez, R., Maljaee, H., Ghiassi, B., Lourenço, P. B., & Oliveira, D. V. (2019). Bond behavior degradation between FRP and masonry under aggressive environmental conditions. Mechanics of Advanced Materials and Structures, 26(1), 6-14. https://doi.org/10.1080/15376494.2018.1534164

Application of Fibre Reinforced Polymers (FRPs) as external reinforcement for masonry structures has been found to be a promising technique, but the long-term behavior of such systems still needs attention. This study presents an overview of the expe... Read More about Bond behavior degradation between FRP and masonry under aggressive environmental conditions.

Systems Theoretic Accident Model and Process (STAMP) applied to a Royal Navy Hawk jet missile simulation exercise (2018)
Journal Article
Stanton, N. A., Allison, C. K., & Harvey, C. (2019). Systems Theoretic Accident Model and Process (STAMP) applied to a Royal Navy Hawk jet missile simulation exercise. Safety Science, 113, 461-471. https://doi.org/10.1016/j.ssci.2018.12.020

The Royal Navy uses Hawk jets to simulate sea-skimming missile attacks against vessels as part of their training regulations. To best achieve these goals, pilots of the Hawk are required to fly at approximately 50 feet above sea level to accurately m... Read More about Systems Theoretic Accident Model and Process (STAMP) applied to a Royal Navy Hawk jet missile simulation exercise.

Optimal Utilization of Combined Double Layer and Nernstian Charging of Activated Carbon Electrodes in Aqueous Halide Supercapattery through Capacitance Unequalization (2018)
Journal Article
Akinwolemiwa, B., Wei, C., Yang, Q., Yu, L., Xia, L., Hu, D., …Chen, G. Z. (2018). Optimal Utilization of Combined Double Layer and Nernstian Charging of Activated Carbon Electrodes in Aqueous Halide Supercapattery through Capacitance Unequalization. Journal of The Electrochemical Society, 165(16), A4067-A4076. https://doi.org/10.1149/2.0031902jes

Charge storage through electric double layer (EDL) charging of activated carbon (AC) and redox reactions of iodide and bromide ions in aqueous electrolytes and at the AC | electrolyte interface has been investigated by cyclic voltammetry and galvanos... Read More about Optimal Utilization of Combined Double Layer and Nernstian Charging of Activated Carbon Electrodes in Aqueous Halide Supercapattery through Capacitance Unequalization.

Pb(II) removal using carbon adsorbents prepared by hybrid heating system: Understanding the microwave heating by dielectric characterization and numerical simulation (2018)
Journal Article
Durán-Jiménez, G., Hernández-Montoya, V., Oyarzun, J. R., Montes-Morán, M. Á., & Binner, E. (2019). Pb(II) removal using carbon adsorbents prepared by hybrid heating system: Understanding the microwave heating by dielectric characterization and numerical simulation. Journal of Molecular Liquids, 277, 663-671. https://doi.org/10.1016/j.molliq.2018.12.143

This work studies the effect of microwaves in the synthesis of carbon adsorbents using pecan nutshell biomass as a precursor in a hybrid multimode microwave cavity avoiding the utilization of chemical activation or susceptors. The dielectric properti... Read More about Pb(II) removal using carbon adsorbents prepared by hybrid heating system: Understanding the microwave heating by dielectric characterization and numerical simulation.

Energy and exergy analysis of fuel cells: a review (2018)
Journal Article
Arshad, A., Ali, H. M., Habib, A., Bashir, M. A., Jabbal, M., & Yan, Y. (2019). Energy and exergy analysis of fuel cells: a review. Thermal Science and Engineering Progress, 9, 308-321. https://doi.org/10.1016/j.tsep.2018.12.008

In this paper, the fundamental overview of theoretical and practical aspects of thermodynamics analysis for mainly used fuel cells (FCs) are presented. The FC converts the chemical energy of fuel (normally hydrogen) directly into electrical energy re... Read More about Energy and exergy analysis of fuel cells: a review.

Current-Fed Isolated DC/DC Converter for Future Aerospace Microgrids (2018)
Journal Article
Tarisciotti, L., Costabeber, A., Chen, L., Walker, A., & Galea, M. (2019). Current-Fed Isolated DC/DC Converter for Future Aerospace Microgrids. IEEE Transactions on Industry Applications, 55(3), 2823-2832. https://doi.org/10.1109/tia.2018.2889845

High-performance power conversion equipment is currently gaining an increasing interest for aircraft applications. In particular, isolated bidirectional dc/dc converters are often proposed for modern aircraft distribution systems. A current-fed isola... Read More about Current-Fed Isolated DC/DC Converter for Future Aerospace Microgrids.

Exceptional Performance of Hierarchical Ni-Fe (hydr)oxide@NiCu Electrocatalysts for Water Splitting (2018)
Journal Article
Zhou, Y., Wang, Z., Pan, Z., Liu, L., Xi, J., Luo, X., & Shen, Y. (2019). Exceptional Performance of Hierarchical Ni-Fe (hydr)oxide@NiCu Electrocatalysts for Water Splitting. Advanced Materials, 31(8), Article 1806769. https://doi.org/10.1002/adma.201806769

Developing low‐cost bifunctional electrocatalysts with superior activity for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of great importance for the widespread application of the water splitting technique. In thi... Read More about Exceptional Performance of Hierarchical Ni-Fe (hydr)oxide@NiCu Electrocatalysts for Water Splitting.

Meso-scale modelling of 3D woven composite T-joints with weave variations (2018)
Journal Article
Yan, S., Zeng, X., & Long, A. (2019). Meso-scale modelling of 3D woven composite T-joints with weave variations. Composites Science and Technology, 171, 171-179. https://doi.org/10.1016/j.compscitech.2018.12.024

A meso-scale modelling framework is proposed to simulate the 3D woven fibre architectures and the mechanical performance of the composite T-joints, subjected to quasi-static tensile pull-off loading. The proposed method starts with building the reali... Read More about Meso-scale modelling of 3D woven composite T-joints with weave variations.

A robust Bayesian methodology for damage localization in plate-like structures using ultrasonic guided-waves (2018)
Journal Article
Cantero-Chinchilla, S., Chiachío, M., Chiachío, J., Chronopoulos, D., & Jones, A. (2019). A robust Bayesian methodology for damage localization in plate-like structures using ultrasonic guided-waves. Mechanical Systems and Signal Processing, 122, 192-205. https://doi.org/10.1016/j.ymssp.2018.12.021

SHM methods for damage detection and localization in plate-like structures have typically relied on signal post-processing techniques applied to ultrasonic guided-waves. The time of flight is one of these signals features which has been extensively u... Read More about A robust Bayesian methodology for damage localization in plate-like structures using ultrasonic guided-waves.

Resolution enhancement for topography measurement of high-dynamic-range surfaces via image fusion (2018)
Journal Article
Wang, J., Su, R., Leach, R., Lu, W., Zhou, L., & Jiang, X. (2018). Resolution enhancement for topography measurement of high-dynamic-range surfaces via image fusion. Optics Express, 26(26), 34805-34819. https://doi.org/10.1364/OE.26.034805

In this paper, we introduce a method and algorithm for resolution enhancement of low-resolution surface topography data by fusing it with corresponding high-resolution intensity images. This fusion is carried out by linking the three-dimensional topo... Read More about Resolution enhancement for topography measurement of high-dynamic-range surfaces via image fusion.

Artificial Intelligence Aided Automated Design for Reliability of Power Electronic Systems (2018)
Journal Article
Dragicevic, T., Wheeler, P., & Blaabjerg, F. (2019). Artificial Intelligence Aided Automated Design for Reliability of Power Electronic Systems. IEEE Transactions on Power Electronics, 34(8), 7161-7171. https://doi.org/10.1109/TPEL.2018.2883947

© 1986-2012 IEEE. This paper proposes a new methodology for automated design of power electronic systems realized through the use of artificial intelligence. Existing approaches do not consider the system's reliability as a performance metric or are... Read More about Artificial Intelligence Aided Automated Design for Reliability of Power Electronic Systems.

Understanding the effect of indoor air pollution on pneumonia in children under five in low and middle income countries: a systematic review of evidence (2018)
Journal Article
Adaji, E. E., Ekezie, W., Clifford, M., & Phalkey, R. (2019). Understanding the effect of indoor air pollution on pneumonia in children under five in low and middle income countries: a systematic review of evidence. Environmental Science and Pollution Research, 26(4), 3208–3225. https://doi.org/10.1007/s11356-018-3769-1

Background Exposure to indoor air pollution increases the risk of pneumonia in children, accounting for about a million deaths globally. This study investigates the individual effect of solid fuel, carbon monoxide (CO), black carbon (BC) and PM2.... Read More about Understanding the effect of indoor air pollution on pneumonia in children under five in low and middle income countries: a systematic review of evidence.

A reflection-mode fibre-optic sensor for breath carbon dioxide measurement in healthcare (2018)
Journal Article
Liu, L., Hao, F., Morgan, S. P., Correia, R., Norris, A., & Korposh, S. (2019). A reflection-mode fibre-optic sensor for breath carbon dioxide measurement in healthcare. Sensing and Bio-Sensing Research, 22, Article 100254. https://doi.org/10.1016/j.sbsr.2018.100254

A reflection-mode carbon dioxide (CO2) fibre optic sensor (FOS) is developed based on the colorimetric change of pH indicator dye thymol blue. The CO2 sensing film comprises thymol blue and tetramethylammonium hydroxide in the form of an ion pair dop... Read More about A reflection-mode fibre-optic sensor for breath carbon dioxide measurement in healthcare.

An investigation of lime addition to fuel as a countermeasure to bed agglomeration for the combustion of non-woody biomass fuels in a 20kWth bubbling fluidised bed combustor (2018)
Journal Article
Chi, H., Pans, M. A., Sun, C., & Liu, H. (2019). An investigation of lime addition to fuel as a countermeasure to bed agglomeration for the combustion of non-woody biomass fuels in a 20kWth bubbling fluidised bed combustor. Fuel, 240, 349-361. https://doi.org/10.1016/j.fuel.2018.11.122

The unique fuel flexibility of fluidised bed system facilitates the combustion of low quality solid fuels such as agricultural residues, but may suffer from serious bed agglomeration problems especially when operating at the high end of the typical f... Read More about An investigation of lime addition to fuel as a countermeasure to bed agglomeration for the combustion of non-woody biomass fuels in a 20kWth bubbling fluidised bed combustor.

The continuous combustion of glycerol in a fluidised bed (2018)
Journal Article
Gibson, I., Slim, C. J., Zheng, Y., Scott, S. A., Davidson, J. F., & Hayhurst, A. N. (2019). The continuous combustion of glycerol in a fluidised bed. Combustion and Flame, 200, 60-68. https://doi.org/10.1016/j.combustflame.2018.10.021

It is difficult to burn a liquid fuel inside a fluidised bed. For the first time, liquid glycerol has been burned, when continuously injected into the bottom of an electrically heated bed of alumina particles (sieved to 355–425 µm), fluidised by air.... Read More about The continuous combustion of glycerol in a fluidised bed.

Plausible petri nets as self-adaptive expert systems: a tool for infrastructure asset monitoring (2018)
Journal Article
Chiachío, M., Chiachío, J., Prescott, D., & Andrews, J. (2019). Plausible petri nets as self-adaptive expert systems: a tool for infrastructure asset monitoring. Computer-Aided Civil and Infrastructure Engineering, 34(4), 281-298. https://doi.org/10.1111/mice.12427

This paper provides a computational framework to model self-adaptive expert systems using the Petri net (PN) formalism. Self-adaptive expert systems are understood here as expert systems with the ability to autonomously learn from external inputs, li... Read More about Plausible petri nets as self-adaptive expert systems: a tool for infrastructure asset monitoring.

Collaborative Virtual Environment to Facilitate Game Design Evaluation with Children with ASC (2018)
Journal Article
Roper, T., Millen Dutka, L., Cobb, S., & Patel, H. (2018). Collaborative Virtual Environment to Facilitate Game Design Evaluation with Children with ASC. International Journal of Human-Computer Interaction, 35(8), 692-705. https://doi.org/10.1080/10447318.2018.1550179

© 2018 Taylor & Francis Group, LLC. Involvement of children with autism spectrum conditions (ASC) in the design of new educational technology is becoming more prevalent. Despite potential barriers due to communication and ideation difficulties for... Read More about Collaborative Virtual Environment to Facilitate Game Design Evaluation with Children with ASC.

Cyclic and Post-cycling Anchor Response in Geocell-Reinforced Sand (2018)
Journal Article
Moghaddas Tafreshi, S. N., Rahimi, M., Dawson, A., & Leshchinsky, B. (2018). Cyclic and Post-cycling Anchor Response in Geocell-Reinforced Sand. Canadian Geotechnical Journal, 56(11), 1700-1718. https://doi.org/10.1139/cgj-2018-0559

Plate anchors are commonly used to resist static, cyclic and monotonic after cyclic-loading uplift loads. Under cyclic loading, progressive sudden failure may occur, characterized by accumulated displacement – even under loads significantly less than... Read More about Cyclic and Post-cycling Anchor Response in Geocell-Reinforced Sand.

Chitosan as a coupling agent for phosphate glass fibre/polycaprolactone composites (2018)
Journal Article
Tan, C., Rudd, C., Parsons, A. J., Sharmin, N., Zhang, J., Chen, W., & Ahmed, I. (2018). Chitosan as a coupling agent for phosphate glass fibre/polycaprolactone composites. Fibers, 6(4), https://doi.org/10.3390/fib6040097

This study shows that chitosan (CS) could be highly useful as a coupling agent in phosphate glass fibre/polycaprolactone (PGF/PCL) composites, as it improved the interfacial shear strength by up to 78%. PGFs of composition 45P2O5-5B2O3-5Na2O-24CaO-10... Read More about Chitosan as a coupling agent for phosphate glass fibre/polycaprolactone composites.