All Outputs (20)

Comparison of Frequency Transform Methods for Condition Monitoring of a DC-Link Capacitor (2021)
Conference Proceeding

Electrolytic capacitors continue to be used for the DC-link in motor drive systems due to their high specific capacitance. The degradation of electrolytic capacitors can lead to increased equivalent series resistances (ESR) and reduction in capacitan... Read More about Comparison of Frequency Transform Methods for Condition Monitoring of a DC-Link Capacitor.

A PM-Assisted Synchronous Reluctance Motor with Two Slot-Pitch Winding (2020)
Conference Proceeding

This paper presents a novel electric motor solution to tackle the increasing demand on the traction motor for electric vehicles. The proposed electric motor has a 24 slots 10 poles fractional slot two-slot pitch winding and a PM-assisted synchronous... Read More about A PM-Assisted Synchronous Reluctance Motor with Two Slot-Pitch Winding.

Analysis of a Five-Phase PM Vernier Machine Topology with Two-Slot Pitch Winding (2020)
Conference Proceeding

This paper presents a five-phase permanent magnet (PM) vernier machine topology equipped with a two-slot pitch winding. The two-slot pitch winding provides a trade-off between fractional slots concentrated winding (FSCW) and integrated slot distribut... Read More about Analysis of a Five-Phase PM Vernier Machine Topology with Two-Slot Pitch Winding.

Design Considerations of Fault-Tolerant Electromechanical Actuator Systems for More Electric Aircraft (MEA) (2018)
Conference Proceeding

This paper studies the concerns such as architecture and reliability in the deployment of electromechanical actuator (EMA) in the actuation system for more electric aircraft (MEA). First, the reliability of the actuation system architecture such as c... Read More about Design Considerations of Fault-Tolerant Electromechanical Actuator Systems for More Electric Aircraft (MEA).

Torque Quality Improvement of an Open-End Winding PMSM (2018)
Conference Proceeding

This paper proposes a new closed-loop control strategy which improves the quality of the torque output of an open-end winding (OEW) permanent magnet synchronous motor (PMSM) with common DC bus. Such a configuration provides a path for the zero sequen... Read More about Torque Quality Improvement of an Open-End Winding PMSM.

Non-Intrusive Online Stator Temperature Estimation for Open-End Winding PMSM (2018)
Conference Proceeding

This paper proposes a new method for online identification of stator winding temperature for an open-end winding (OEW) permanent magnet synchronous motor (PMSM). The method exploits the zero sequence current (ZSC) due to the third harmonic back elect... Read More about Non-Intrusive Online Stator Temperature Estimation for Open-End Winding PMSM.

Mass Production Costing of Induction Machines for Automotive Applications (2018)
Conference Proceeding

Cost is one of the key parameters of electric machines designed for automotive applications. In order to keep manufacturing cost low, it is desirable to estimate the manufacturing cost of the machine in the early stages of the design process. For thi... Read More about Mass Production Costing of Induction Machines for Automotive Applications.

Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle (2018)
Conference Proceeding

A switched reluctance machine (SRM) is very robust and capable to perform well under harsh conditions. It is simple in construction and avoids the use of magnets so it is cheap to manufacture. The powertrain of a hybrid vehicle presents challenging c... Read More about Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle.

A novel 24-slots14-poles fractional-slot concentrated winding topology with low space harmonics for electrical machines (2018)
Conference Proceeding

This paper proposes a novel winding layout for the machines with fractional-slot concentrated windings (FSCW) using a stator shifting concept and non-overlapping windings, with which all the non-working harmonics will be completely cancelled or signi... Read More about A novel 24-slots14-poles fractional-slot concentrated winding topology with low space harmonics for electrical machines.

Performance improvement of simplified synchronous generators using an active power filter (2017)
Conference Proceeding

Active power filters (APF) are used to improve power quality and are commonly connected in parallel with the load at the point of common coupling (PCC). They are used to compensate for harmonics from nonlinear loads, for reactive power compensation a... Read More about Performance improvement of simplified synchronous generators using an active power filter.

Comparative study and optimal design of alternative PM configuration transverse flux linear machine (2017)
Conference Proceeding

This paper presents the comparative study and optimal design of a transverse flux linear machine with different PM configurations, viz. surface-mounted and consequent-pole, in which the consequent-pole version is firstly proposed. Firstly, the effect... Read More about Comparative study and optimal design of alternative PM configuration transverse flux linear machine.

Improving magnetic gear overload torque with cage rotor bars (2017)
Conference Proceeding

This paper introduces a coaxial magnetic gearbox with a new high-speed rotor configuration. The proposed configuration optimizes magnet volume and employs cage rotor bars in the high-speed rotor. The resulting proposed gear improves torque performanc... Read More about Improving magnetic gear overload torque with cage rotor bars.

Comparative study of novel tubular flux-reversal transverse flux permanent magnet linear machine (2017)
Conference Proceeding

This paper presents a novel tubular flux-reversal transverse flux permanent magnet linear machine (FR-TFPMLM), in which both magnet and armature winding are located at the short primary side whereas the secondary side is composed of only magnetic ste... Read More about Comparative study of novel tubular flux-reversal transverse flux permanent magnet linear machine.

IGBT-SiC dual fed open end winding PMSM drive (2017)
Conference Proceeding

This paper proposes a dual fed common dc link inverter Open End Winding-Permanent Magnet Synchronous Motor (OEW-PMSM) Drive. In order to increase the system efficiency a dual technology converter is used, with one inverter composed of standard IGBT d... Read More about IGBT-SiC dual fed open end winding PMSM drive.

Enhancing electromagnetic launch capability: design of a small launch system for large UAVs (2017)
Conference Proceeding

Unmanned Aerial Vehicles (UAVs) play a critical and increasing role in modern combat, giving significantly enhanced surveillance, communication and strike capabilities. There are currently a large range of UAV’s available, but in general the more cap... Read More about Enhancing electromagnetic launch capability: design of a small launch system for large UAVs.

Reducing weight and fuel consumption of civil aircraft by electromagnetic launch (2017)
Conference Proceeding

Electromagnetic launch systems have been proposed for military applications to accelerate jet planes on aircraft carriers. This paper proposes the implementation of similar technology to aid civil aircraft take-off, which can provide significant econ... Read More about Reducing weight and fuel consumption of civil aircraft by electromagnetic launch.

Vehicular suspension and propulsion using double sided linear induction machines (2016)
Conference Proceeding

This paper presents a new method of combined electromagnetic levitation and propulsion using a double sided pair of linear induction machines and a simple conductive sheet secondary. If the supply phase angle of one primary is modified with respect t... Read More about Vehicular suspension and propulsion using double sided linear induction machines.

History and recent advancements of electric propulsion and integrated electrical power systems for commercial & naval vessels (2016)
Conference Proceeding

Due to developments in power electronics, electric machines, energy storage and control, electric propulsion and integrated electrical power systems have become major trends for commercial and naval vessels. This is mainly due to the fact that the us... Read More about History and recent advancements of electric propulsion and integrated electrical power systems for commercial & naval vessels.

Design study and scaled experiment of induction and synchronous motor for civil application of electromagnetic aircraft launch system (2016)
Conference Proceeding

The engine size of modern passenger transport aircraft is principally determined by take-off conditions, since initial acceleration requires maximum engine power. An Electromagnetic Launch (EML) system could provide some or all of the energy required... Read More about Design study and scaled experiment of induction and synchronous motor for civil application of electromagnetic aircraft launch system.

Superconducting and conventional electromagnetic launch system for civil aircraft assisted take-off
Conference Proceeding

This paper compares three possible linear motor topologies for an electromagnetic launch system to assist civil aircraft take-off. Assisted launch of civil aircraft has the potential of reducing the required runway length, reducing noise and emission... Read More about Superconducting and conventional electromagnetic launch system for civil aircraft assisted take-off.