All Outputs (55)

Extracting focus variation data from coherence scanning interferometric measurements (2024)
Journal Article

Coherence scanning interferometry (CSI), based on the principle of interference, can achieve sub-nanometer precision for height measurements. On the other hand, focus variation microscopy (FVM), combining the small depth of field of the objective, is... Read More about Extracting focus variation data from coherence scanning interferometric measurements.

Comparison of Fourier optics-based methods for modeling coherence scanning interferometry (2024)
Journal Article

Coherence scanning interferometry (CSI) is a widely used optical method for surface topography measurement of industrial and biomedical surfaces. The operation of CSI can be modeled using approximate physics-based approaches with minimal computationa... Read More about Comparison of Fourier optics-based methods for modeling coherence scanning interferometry.

Enhancing single camera calibration results using artificial bee colony optimisation within a virtual environment (2024)
Conference Proceeding

Close range photogrammetry is among the top candidates for non-contact metrology in high precision applications. It is frequently used within industrial environments for high precision measurement, automation, and control tasks. When using off-the-sh... Read More about Enhancing single camera calibration results using artificial bee colony optimisation within a virtual environment.

Assessing the spatial distribution of positional error associated to dense point cloud measurements using regional Gaussian random fields (2024)
Journal Article

Being able to assess the amount of uncertainty locally associated to dense point clouds generated by measurement can help investigate the relations between the metrological performance of a chosen measuring technology, and the local geometric and sur... Read More about Assessing the spatial distribution of positional error associated to dense point cloud measurements using regional Gaussian random fields.

Vision-based detection and coordinate metrology of a spatially encoded multi-sphere artefact (2023)
Journal Article

New developments in vision algorithms prioritise identification and perception over accurate coordinate measurement due to the complex problem of resolving object form and pose from images. Consequently, many vision algorithms for coordinate measurem... Read More about Vision-based detection and coordinate metrology of a spatially encoded multi-sphere artefact.

Dynamic surface displacement measurement using carrier optical vortex interferometer: A numerical study (2023)
Journal Article

The measurement of dynamic surface displacement is crucial in understanding mechanical and thermophysical dynamics at nanometre to micrometre-scale. Interferometers using optical vortices are gaining attention due to their ability to demodulate fring... Read More about Dynamic surface displacement measurement using carrier optical vortex interferometer: A numerical study.

Comparison of approximate methods for modelling coherence scanning interferometry (2023)
Journal Article

Coherence scanning interferometry (CSI) is a widely used optical method for surface topography measurement of industrial and biomedical surfaces. The operation of CSI can be modelled using approximate physics-based approaches with minimal computation... Read More about Comparison of approximate methods for modelling coherence scanning interferometry.

Uncertainty analysis of an augmented industrial robot (2023)
Conference Proceeding

Industrial robots are often used in additive manufacturing (AM) environments to automate the process of creating complex parts and structures. One example of an industrial robot used in AM is for wire and arc additive manufacturing. This process invo... Read More about Uncertainty analysis of an augmented industrial robot.

High-accuracy robotic metrology for precise industrial manipulation tasks (2023)
Conference Proceeding

The majority of industrial production processes can be divided into a series of object manipulation and handling tasks that can be adapted for robots. Through significant advances in compliant grasping, sensing and actuation technologies, robots are... Read More about High-accuracy robotic metrology for precise industrial manipulation tasks.

Comparison of coherence scanning interferometry, focus variation and confocal microscopy for surface topography measurement (2023)
Conference Proceeding

The most common optical technologies for surface topography measurement are coherence scanning interferometry (CSI), focus variation microscopy (FV) and imaging confocal microscopy (CM). Due to the benefits and drawbacks of each, these instruments ar... Read More about Comparison of coherence scanning interferometry, focus variation and confocal microscopy for surface topography measurement.

Measurement of powder spreading dynamics in additive manufacturing (2023)
Conference Proceeding

In this work, we examine the effect of the state of the pre-processing powder bed in powder-based additive manufacturing, particularly in metal laser powder bed fusion (PBF-LB). The spreading of the powder layer has been identified as a critical but... Read More about Measurement of powder spreading dynamics in additive manufacturing.

Precision Denavit–Hartenberg Parameter Calibration for Industrial Robots Using a Laser Tracker System and Intelligent Optimization Approaches (2023)
Journal Article

Precision object handling and manipulation require the accurate positioning of industrial robots. A common practice for performing end effector positioning is to read joint angles and use industrial robot forward kinematics (FKs). However, industrial... Read More about Precision Denavit–Hartenberg Parameter Calibration for Industrial Robots Using a Laser Tracker System and Intelligent Optimization Approaches.

Enhancing Positional Accuracy of the XY-Linear Stage Using Laser Tracker Feedback and IT2FLS (2023)
Journal Article

This paper proposes a calibration algorithm to improve the positional accuracies of an industrial XY-linear stage. Precision positioning of these linear stages is required to maintain highly accurate object handling and manipulation. However, due to... Read More about Enhancing Positional Accuracy of the XY-Linear Stage Using Laser Tracker Feedback and IT2FLS.

A Neural Network Separation Approach for the Inclusion of Static Friction in Nonlinear Static Models of Industrial Robots (2023)
Journal Article

Static friction modeling is a critical task to have the accurate robot model. In this article, a neural network separation approach to include nonlinear static friction in models of industrial robots is proposed. For this purpose, the terms correspon... Read More about A Neural Network Separation Approach for the Inclusion of Static Friction in Nonlinear Static Models of Industrial Robots.

Intelligent Static Calibration of Industrial Robots using Artificial Bee Colony Algorithm (2023)
Conference Proceeding

This paper proposes an industrial robot calibration methodology using an artificial bee colony algorithm. Open loop industrial robot positions are usually calculated using joint angle readings and industrial robot forward kinematics, where feedback c... Read More about Intelligent Static Calibration of Industrial Robots using Artificial Bee Colony Algorithm.

Improving the localisation of features for the calibration of cameras using EfficientNets (2023)
Journal Article

Camera-based methods for optical coordinate metrology, such as digital fringe projection, rely on accurate calibration of the cameras in the system. Camera calibration is the process of determining the intrinsic and distortion parameters which define... Read More about Improving the localisation of features for the calibration of cameras using EfficientNets.

Quantitative investigation of the validity conditions for the Beckmann-Kirchhoff scattering model (2022)
Journal Article

Approximate and rigorous methods are widely used to model light scattering from a surface. The boundary element method (BEM) is a rigorous model that accounts for polarization and multiple scattering effects. BEM is suitable to model the scattered li... Read More about Quantitative investigation of the validity conditions for the Beckmann-Kirchhoff scattering model.

Autonomous image background removal for accurate and efficient close-range photogrammetry (2022)
Journal Article

Close-range photogrammetry can be used to reconstruct dense point clouds of an object with very high surface coverage, making it useful for manufacturing metrology tasks such as part inspection and validation. However, compared to competing technique... Read More about Autonomous image background removal for accurate and efficient close-range photogrammetry.

Applications of data fusion in optical coordinate metrology: a review (2022)
Journal Article

Data fusion enables the characterisation of an object using multiple datasets collected by various sensors. To improve optical coordinate measurement using data fusion, researchers have proposed numerous algorithmic solutions and methods. The most po... Read More about Applications of data fusion in optical coordinate metrology: a review.

Surface texture characterisation with reduced boundary effect for diamond-turned micro-structured surfaces (2022)
Journal Article

Micro-structured surfaces, fabricated by ultra-precision diamond turning (UPDT) with nanometric surface texture, have been widely used due to their wide range of functionalities. Their functional performance is closely related to their surface textur... Read More about Surface texture characterisation with reduced boundary effect for diamond-turned micro-structured surfaces.