All Outputs (70)

Impedimetric Characterization of Bipolar Nanoelectrodes with Cancer Cells (2021)
Journal Article
Robinson, A. J., Jain, A., Rahman, R., Abayzeed, S., Hague, R. J., & Rawson, F. J. (2021). Impedimetric Characterization of Bipolar Nanoelectrodes with Cancer Cells. ACS Omega, 6(44), 29495-29505. https://doi.org/10.1021/acsomega.1c03547

Merging of electronics with biology, defined as bioelectronics, at the nanoscale holds considerable promise for sensing and modulating cellular behavior. Advancing our understanding of nanobioelectronics will facilitate development and enable applica... Read More about Impedimetric Characterization of Bipolar Nanoelectrodes with Cancer Cells.

Insights into drop-on-demand metal additive manufacturing through an integrated experimental and computational study (2021)
Journal Article
Gilani, N., Aboulkhair, N. T., Simonelli, M., East, M., Ashcroft, I., & Hague, R. J. (2021). Insights into drop-on-demand metal additive manufacturing through an integrated experimental and computational study. Additive Manufacturing, 48(Part B), Article 102402. https://doi.org/10.1016/j.addma.2021.102402

Drop-on-demand metal jetting is a recent additive manufacturing technology opening new opportunities for the fabrication of complex single and multi-metal components. MetalJet, the Océ developed technique used in this study, has the capacity to produ... Read More about Insights into drop-on-demand metal additive manufacturing through an integrated experimental and computational study.

The interaction of volatile metal coatings during the laser powder bed fusion of copper (2021)
Journal Article
Speidel, A., Wadge, M. D., Gargalis, L., Cooper, T. P., Reynolds, W., Grant, D., …Murray, J. W. (2022). The interaction of volatile metal coatings during the laser powder bed fusion of copper. Journal of Materials Processing Technology, 299, Article 117332. https://doi.org/10.1016/j.jmatprotec.2021.117332

The high optical reflectance of Cu at near-infrared wavelengths narrows the process window to fabricate Cu parts by laser powder bed fusion (LPBF). Coating powders with optically absorptive materials has been investigated to improve processability an... Read More about The interaction of volatile metal coatings during the laser powder bed fusion of copper.

Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers (2021)
Journal Article
Ruiz-Cantu, L., Trindade, G. F., Taresco, V., Zhou, Z., He, Y., Burroughs, L., …Wildman, R. D. (2021). Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers. ACS Applied Materials and Interfaces, 13(33), 38969-38978. https://doi.org/10.1021/acsami.1c07850

Controlling the microstructure of materials by means of phase separation is a versatile tool for optimizing material properties. Phase separation has been exploited to fabricate intricate microstructures in many fields including cell biology, tissue... Read More about Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers.

Process-structure-property relationships in laser powder bed fusion of permanent magnetic Nd-Fe-B (2021)
Journal Article
Wu, J., Aboulkhair, N. T., Degano, M., Ashcroft, I., & Hague, R. J. (2021). Process-structure-property relationships in laser powder bed fusion of permanent magnetic Nd-Fe-B. Materials and Design, 209, Article 109992. https://doi.org/10.1016/j.matdes.2021.109992

Laser powder-bed fusion (L-PBF), as an additive manufacturing (AM) technique, has demonstrated excellent capabilities in achieving degrees of freedom in manufacturing that are otherwise unattainable. The potential of combining Nd-Fe-B as a permanent... Read More about Process-structure-property relationships in laser powder bed fusion of permanent magnetic Nd-Fe-B.

Residual polymer stabiliser causes anisotropic electrical conductivity during inkjet printing of metal nanoparticles (2021)
Journal Article
Trindade, G. F., Wang, F., Im, J., He, Y., Balogh, A., Scurr, D., …Roberts, C. J. (2021). Residual polymer stabiliser causes anisotropic electrical conductivity during inkjet printing of metal nanoparticles. Communications Materials, 2(1), Article 47. https://doi.org/10.1038/s43246-021-00151-0

Inkjet printing of metal nanoparticles allows for design flexibility, rapid processing and enables the 3D printing of functional electronic devices through co-deposition of multiple materials. However, the performance of printed devices, especially t... Read More about Residual polymer stabiliser causes anisotropic electrical conductivity during inkjet printing of metal nanoparticles.

UV-curable silicone materials with tuneable mechanical properties for 3D Printing (2021)
Journal Article
Foerster, A., Annarasa, V., Terry, A., Wildman, R., Hague, R., Irvine, D., …Tuck, C. (2021). UV-curable silicone materials with tuneable mechanical properties for 3D Printing. Materials and Design, Article 109681. https://doi.org/10.1016/j.matdes.2021.109681

In this paper, we present the development of a family of novel, UV-curable, highly flexible, 3D printable silicone-based materials, the mechanical properties of which can be tuned simply by varying the ratio of the polymerisable reagents within the f... Read More about UV-curable silicone materials with tuneable mechanical properties for 3D Printing.

Modulating the biological function of protein by tailoring the adsorption orientation on nanoparticles (2020)
Journal Article
Jain, A., Trindade, G. F., Hicks, J. M., Potts, J. C., Rahman, R., J. M. Hague, R., …Rawson, F. J. (2021). Modulating the biological function of protein by tailoring the adsorption orientation on nanoparticles. Journal of Colloid and Interface Science, 587, 150-161. https://doi.org/10.1016/j.jcis.2020.12.025

Protein orientation in nanoparticle-protein conjugates plays a crucial role in binding to cell receptors and ultimately, defines their targeting efficiency. Therefore, understanding fundamental aspects of the role of protein orientation upon adsorpti... Read More about Modulating the biological function of protein by tailoring the adsorption orientation on nanoparticles.

Development and Testing of Soft Magnetic Rotor for a Switched Reluctance Motor Built Through Additive Manufacturing Technology (2020)
Conference Proceeding
Gargalis, L., Madonna, V., Giangrande, P., Rocca, R., Ashcroft, I., Hague, R., & Galea, M. (2020). Development and Testing of Soft Magnetic Rotor for a Switched Reluctance Motor Built Through Additive Manufacturing Technology. In 2020 23rd International Conference on Electrical Machines and Systems (ICEMS) (263-268). https://doi.org/10.23919/icems50442.2020.9290893

Additive manufacturing, commonly known as 3D printing, is an emerging technology that is gaining considerable research interest in recent years. In particular, metal printing methodologies might be successfully employed in developing lightweight and... Read More about Development and Testing of Soft Magnetic Rotor for a Switched Reluctance Motor Built Through Additive Manufacturing Technology.

3D Printing as a Technology Enabler for Electrical Machines: Manufacturing and Testing of a Salient Pole Rotor for SRM (2020)
Conference Proceeding
Gargalis, L., Madonna, V., Giangrande, P., Hardy, M., Ashcroft, I., Galea, M., & Hague, R. (2020). 3D Printing as a Technology Enabler for Electrical Machines: Manufacturing and Testing of a Salient Pole Rotor for SRM. In 2020 International Conference on Electrical Machines (ICEM) (12-18). https://doi.org/10.1109/icem49940.2020.9270737

Among the various technology enablers for modern electrical machines, additive manufacturing plays a key role. The advantage of having a precise control of the shape of ferromagnetic structures, whilst achieving good electromagnetic performance, fits... Read More about 3D Printing as a Technology Enabler for Electrical Machines: Manufacturing and Testing of a Salient Pole Rotor for SRM.

Additive Manufacturing and Testing of a Soft Magnetic Rotor for a Switched Reluctance Motor (2020)
Journal Article
Gargalis, L., Madonna, V., Giangrande, P., Rocca, R., Hardy, M., Ashcroft, I., …Hague, R. (2020). Additive Manufacturing and Testing of a Soft Magnetic Rotor for a Switched Reluctance Motor. IEEE Access, 8, 206982-206991. https://doi.org/10.1109/ACCESS.2020.3037190

Additive manufacturing is acknowledged as a key enabling technology, although its adoption is still constrained to niche applications. A promising area for this technology is the production of electrical machines (EMs) and/or their main components (e... Read More about Additive Manufacturing and Testing of a Soft Magnetic Rotor for a Switched Reluctance Motor.

Inter-Flake Quantum Transport of Electrons and Holes in Inkjet-Printed Graphene Devices (2020)
Journal Article
Wang, F., Gosling, J. H., Rance, G. A., Trindade, G. F., Makarovsky, O., Cottam, N. D., …Turyanska, L. (2021). Inter-Flake Quantum Transport of Electrons and Holes in Inkjet-Printed Graphene Devices. Advanced Functional Materials, 31(5), Article 2007478. https://doi.org/10.1002/adfm.202007478

© 2020 The Authors. Advanced Functional Materials published by Wiley-VCH GmbH 2D materials have unique structural and electronic properties with potential for transformative device applications. However, such devices are usually bespoke structures ma... Read More about Inter-Flake Quantum Transport of Electrons and Holes in Inkjet-Printed Graphene Devices.

Modulating the Biological Function of Protein by Tailoring the Adsorption Orientation on Nanoparticles (2020)
Other
Jain, A., Trindade, G., Hicks, J. M., Potts, J. C., Rahman, R., Hague, R., …Rawson, F. Modulating the Biological Function of Protein by Tailoring the Adsorption Orientation on Nanoparticles

Protein orientation in nanoparticle-protein conjugates plays a crucial role in binding to cell receptors and ultimately, defines their targeting efficiency. Therefore, understanding fundamental aspects of the role of protein orientation upon adsorpti... Read More about Modulating the Biological Function of Protein by Tailoring the Adsorption Orientation on Nanoparticles.

Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock (2020)
Journal Article
Aboulkhair, N. T., Zhao, G., Hague, R. J., Kennedy, A. R., Ashcroft, I. A., & Clare, A. T. (2020). Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock. Journal of Manufacturing Processes, 55, 249-253. https://doi.org/10.1016/j.jmapro.2020.04.039

The demonstration of salt dissolution incorporated within laser powder-bed fusion fabrication processes has allowed the creation of complex porous structures without the need for sophisticated design algorithms. This serves to simplify the process, f... Read More about Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock.

Refinement of the grain structure of additive manufactured titanium alloys via epitaxial recrystallization enabled by rapid heat treatment (2020)
Journal Article
Zou, Z., Simonelli, M., Katrib, J., Dimitrakis, G., & Hague, R. (2020). Refinement of the grain structure of additive manufactured titanium alloys via epitaxial recrystallization enabled by rapid heat treatment. Scripta Materialia, 180, 66-70. https://doi.org/10.1016/j.scriptamat.2020.01.027

The coarse prior-? grain structure in titanium alloys produced by additive manufacturing is associated to mechanical anisotropy and limited fatigue life. Here we report a novel methodology to refine such structure by rapid heat treatment of Ti-6Al-4V... Read More about Refinement of the grain structure of additive manufactured titanium alloys via epitaxial recrystallization enabled by rapid heat treatment.

Towards digital metal additive manufacturing via high-temperature drop-on-demand jetting (2019)
Journal Article
Simonelli, M., Aboulkhair, N., Rasa, M., East, M., Tuck, C., Wildman, R., …Hague, R. (2019). Towards digital metal additive manufacturing via high-temperature drop-on-demand jetting. Additive Manufacturing, 30, Article 100930. https://doi.org/10.1016/j.addma.2019.100930

Drop-on-demand jetting of metals offers a fully digital manufacturing approach to surpass the limitations of the current generation powder-based additive manufacturing technologies. However, research on this topic has been restricted mainly to near-n... Read More about Towards digital metal additive manufacturing via high-temperature drop-on-demand jetting.

Wireless Nanobioelectronics for Electrical Intracellular Sensing (2019)
Journal Article
Sanjuan-Alberte, P., Jain, A., Shaw, A. J., Abayzeed, S. A., Domínguez, R. F., Alea-Reyes, M. E., …Rawson, F. J. (2019). Wireless Nanobioelectronics for Electrical Intracellular Sensing. ACS Applied Nano Materials, 2(10), 6397-6408. https://doi.org/10.1021/acsanm.9b01374

For the field of bioelectronics to make an impact on healthcare, there is an urgent requirement for the development of “wireless” electronic systems to enable modulation of chemistry inside of cells. Herein we report on an intracellular wireless elec... Read More about Wireless Nanobioelectronics for Electrical Intracellular Sensing.

Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting (2019)
Journal Article
Aboulkhair, N. T., Simonelli, M., Salama, E., Rance, G., Neate, N. C., Tuck, C. J., …Hague, R. J. (2019). Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting. Materials Science and Engineering: A, 765, Article 138307. https://doi.org/10.1016/j.msea.2019.138307

Aluminium-based composites reinforced with carbon nanotubes are widely sought for their outstanding metallurgical and structural properties that largely depend on the manufacturing route. In this work, the process-structure-property relationship for... Read More about Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting.

Electrical resistivity of pure copper processed by medium-powered laser powder bed fusion additive manufacturing for use in electromagnetic applications (2019)
Journal Article
Silbernagel, C., Gargalis, L., Ashcroft, I., Hague, R., Galea, M., & Dickens, P. (2019). Electrical resistivity of pure copper processed by medium-powered laser powder bed fusion additive manufacturing for use in electromagnetic applications. Additive Manufacturing, 29, https://doi.org/10.1016/j.addma.2019.100831

Pure copper is an excellent thermal and electrical conductor, however, attempts to process it with additive manufacturing (AM) technologies have seen various levels of success. While electron beam melting (EBM) has successfully processed pure copper... Read More about Electrical resistivity of pure copper processed by medium-powered laser powder bed fusion additive manufacturing for use in electromagnetic applications.

Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior (2019)
Journal Article
Vaithilingam, J., Sanjuan‐Alberte, P., Campora, S., Rance, G. A., Jiang, L., Thorpe, J., …Rawson, F. J. (2019). Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior. Advanced Functional Materials, 29(38), Article 1902016. https://doi.org/10.1002/adfm.201902016

Biological structures control cell behavior via physical, chemical, electrical, and mechanical cues. Approaches that allow us to build devices that mimic these cues in a combinatorial way are lacking due to there being no suitable instructive materia... Read More about Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior.