All Outputs (28)

Standard clamp for regenerative braking in matrix converter drive: more electric aircraft (2018)
Journal Article
Munuswamy, I., & Wheeler, P. W. (2018). Standard clamp for regenerative braking in matrix converter drive: more electric aircraft. Journal of Electrical Engineering, 18(2), 394

This paper describes a novel method for braking regeneration in the Matrix Converter (MC) drive is proposed, called Standard Clamp Circuit (SCC) method for More Electric Aircraft (MEA). In earlier publications, Bi-Directional Switch (BDS) method and... Read More about Standard clamp for regenerative braking in matrix converter drive: more electric aircraft.

Phase-shift-modulation for a current-fed isolated DC-DC converter in more electric aircraft (2018)
Journal Article
Chen, L., Tarisciotti, L., Costabeber, A., Guan, Q., Wheeler, P., & Zanchetta, P. (2019). Phase-shift-modulation for a current-fed isolated DC-DC converter in more electric aircraft. IEEE Transactions on Power Electronics, 34(9), 8528-8543. https://doi.org/10.1109/tpel.2018.2889861

A Phase-Shift-Modulation (PSM) technique is proposed for an Active-Bridge-Active-Clamp (ABAC) topology. This topology is aimed for high power more-electric-aircraft applications. The proposed PSM has a complete switching harmonics cancellation on the... Read More about Phase-shift-modulation for a current-fed isolated DC-DC converter in more electric aircraft.

Artificial Intelligence Aided Automated Design for Reliability of Power Electronic Systems (2018)
Journal Article
Dragicevic, T., Wheeler, P., & Blaabjerg, F. (2019). Artificial Intelligence Aided Automated Design for Reliability of Power Electronic Systems. IEEE Transactions on Power Electronics, 34(8), 7161-7171. https://doi.org/10.1109/TPEL.2018.2883947

© 1986-2012 IEEE. This paper proposes a new methodology for automated design of power electronic systems realized through the use of artificial intelligence. Existing approaches do not consider the system's reliability as a performance metric or are... Read More about Artificial Intelligence Aided Automated Design for Reliability of Power Electronic Systems.

On-board microgrids for the More Electric Aircraft: technology review (2018)
Journal Article
Giampaolo, B., Serhiy, B., Marco, L., Patrick, W., & Kamal, A.-H. (2018). On-board microgrids for the More Electric Aircraft: technology review. IEEE Transactions on Industrial Electronics, 66(7), 5588-5599. https://doi.org/10.1109/TIE.2018.2881951

This paper presents an overview of technology related to on-board microgrids for the More Electric Aircraft. All aircraft use an isolated system, where security of supply and power density represent the main requirements. Different distribution syste... Read More about On-board microgrids for the More Electric Aircraft: technology review.

Analysis and Modeling of SiC JFET Bi-Directional Switches Parasitic Oscillation (2018)
Journal Article
Wang, L., Yang, J., Ma, H., Wang, Z., Olanrewaju, K. O., & Wheeler, P. (2019). Analysis and Modeling of SiC JFET Bi-Directional Switches Parasitic Oscillation. IEEE Transactions on Power Electronics, 34(9), 8613-8625. https://doi.org/10.1109/tpel.2018.2885145

Silicon carbide (SiC) junction field-effect transistor (JFET) based bi-directional switches (BDSs) have great potential in the construction of several power electronic circuits, including matrix converters, multi-level converters, solid state breaker... Read More about Analysis and Modeling of SiC JFET Bi-Directional Switches Parasitic Oscillation.

Wide Bandgap Voltage Source Inverter Design for Automotive Electric Drivetrain (2018)
Presentation / Conference Contribution
Savi, F., Buticchi, G., Gerada, C., Wheeler, P., & Barater, D. (2018, November). Wide Bandgap Voltage Source Inverter Design for Automotive Electric Drivetrain. Presented at 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2018, Nottingham, UK

In this paper a high power, high frequency voltage source inverter for automotive traction application is reviewed. The main objectives of the design process is the maximization of power density, while keeping high efficiency and low weight. In this... Read More about Wide Bandgap Voltage Source Inverter Design for Automotive Electric Drivetrain.

An active modulation scheme to boost voltage utilisation of the dual converter with a floating bridge (2018)
Journal Article
Huang, Z., Yang, T., Wheeler, P., Galea, M., Giangrande, P., & Chowdhury, S. (2019). An active modulation scheme to boost voltage utilisation of the dual converter with a floating bridge. IEEE Transactions on Industrial Electronics, 66(7), 5623-5633. https://doi.org/10.1109/TIE.2018.2873539

This paper proposes a capacitor voltage regulation method for the dual converter with a floating bridge for aerospace applications. This topology has previously been reported, but with a constrained voltage utilisation factor due to the need for capa... Read More about An active modulation scheme to boost voltage utilisation of the dual converter with a floating bridge.

A novel immense configurations of boost converter for renewable energy application (2018)
Presentation / Conference Contribution
Maroti, P. K., Padmanaban, S., Blaabjerg, F., Ionel, D., & Wheeler, P. (2018). A novel immense configurations of boost converter for renewable energy application.

A three immense configurations of boost converter for renewable energy application is presented in the paper. The Voltage Lift Switched Inductor (VLSI) structure is pledge to extra high voltage conversion. The proposed work represent the modified hig... Read More about A novel immense configurations of boost converter for renewable energy application.

Vector control of a modular multilevel matrix converter operating over the full output-frequency range (2018)
Journal Article
Diaz, M., Cardenas, R., Espinoza, M., Hackl, C. M., Rojas, F., Clare, J. C., & Wheeler, P. (2019). Vector control of a modular multilevel matrix converter operating over the full output-frequency range. IEEE Transactions on Industrial Electronics, 66(7), 5102-5114. https://doi.org/10.1109/tie.2018.2870367

The Modular Multilevel Matrix Converter ( M 3 C ) is an ac-to-ac converter topology suitable for the control of high-power variable-speed drives. The control of this converter is complex, particularly when the two ac system frequencies are similar o... Read More about Vector control of a modular multilevel matrix converter operating over the full output-frequency range.

Advanced modulations for a current-fed isolated DC-DC converter with wide voltage operating ranges (2018)
Journal Article
Chen, L., Tarisciotti, L., Costabeber, A., Gao, F., Wheeler, P., & Zanchetta, P. (2019). Advanced modulations for a current-fed isolated DC-DC converter with wide voltage operating ranges. IEEE Journal of Emerging and Selected Topics in Power Electronics, 7(4), 2540-2552. https://doi.org/10.1109/jestpe.2018.2870827

An Active-Bridge-Active-Clamp (ABAC) topology with its associated switching patterns and modulation techniques is introduced in this paper. The topology has been designed to comply with stringent power quality requirements in a More Electric Aircraft... Read More about Advanced modulations for a current-fed isolated DC-DC converter with wide voltage operating ranges.

A comparison of modulation techniques for three-phase quasi Z-source modular multilevel converter able to provide DC-link fault blocking capability (2018)
Presentation / Conference Contribution
Khera, F. A., Klumpner, C., & Wheeler, P. W. (2018, September). A comparison of modulation techniques for three-phase quasi Z-source modular multilevel converter able to provide DC-link fault blocking capability. Paper presented at EPE'18 ECCE Europe - 20th European Conference on Power Electronics and Applications

Future transmission and distribution grids will use power converters to enable interface with HVDC systems and the Modular Multilevel Converter (MMC) is a topology that is already employed in commercial systems. The MMC converter inherent the benefit... Read More about A comparison of modulation techniques for three-phase quasi Z-source modular multilevel converter able to provide DC-link fault blocking capability.

Design of an Integrated Inductor for 45kW Aerospace Starter-Generator (2018)
Presentation / Conference Contribution
Raza Khowja, M., Gerada, C., Vakil, G., Quadri, S. Q., Wheeler, P., & Patel, C. (2018). Design of an Integrated Inductor for 45kW Aerospace Starter-Generator. In 2018 IEEE Transportation and Electrification Conference and Expo (ITEC) (570-575). https://doi.org/10.1109/ITEC.2018.8450246

A close physical and functional integration of passive components is required to make an efficient and power dense overall system. Such power dense systems are a prerequisite in aerospace and marine applications. This paper presents a design of an in... Read More about Design of an Integrated Inductor for 45kW Aerospace Starter-Generator.

Unipolar single reference multicarrier sinusoidal pulse width modulation based 7-level inverter with reduced number of semiconductor switches for renewable energy applications (2018)
Presentation / Conference Contribution
Raj, K., Mahajan, S. B., Sanjeevikumar, P., Frede, B., Pat, W., & Muhammad H., R. (2018, August). Unipolar single reference multicarrier sinusoidal pulse width modulation based 7-level inverter with reduced number of semiconductor switches for renewable energy applications. Paper presented at IEEE-PEMC 2018 - 18th International Conference on Power Electronics and Motion Control

In the present scenario of increasing power
demand and depletion of fossil fuel results in the research
advancements in the field of renewable energy sources. Among
various types of renewable energy sources, photovoltaic related
applications are... Read More about Unipolar single reference multicarrier sinusoidal pulse width modulation based 7-level inverter with reduced number of semiconductor switches for renewable energy applications.

A Modulated Model Predictive Control Scheme for the Brushless Doubly Fed Induction Machine (2018)
Journal Article
Li, X., Peng, T., Dan, H., Zhang, G., Tang, W., Jin, W., …Rivera, M. (2018). A Modulated Model Predictive Control Scheme for the Brushless Doubly Fed Induction Machine. IEEE Journal of Emerging and Selected Topics in Power Electronics, 6(4), 1681-1691. https://doi.org/10.1109/JESTPE.2018.2865668

© 2013 IEEE. Brushless doubly fed induction machines (BDFIMs) feature some important advantages, such as high reliability and low maintenance cost, over alternative solutions for brushless machine applications. This paper proposes a modulated model p... Read More about A Modulated Model Predictive Control Scheme for the Brushless Doubly Fed Induction Machine.

Development of aircraft electric starter-generator system based-on active rectification technology (2018)
Journal Article
Bozhko, S., Yang, T., Le Peuvedic, J.-M., Arumugam, P., Degano, M., La Rocca, A., …Wheeler, P. (2018). Development of aircraft electric starter-generator system based-on active rectification technology. IEEE Transactions on Transportation Electrification, 4(4), 985-996. https://doi.org/10.1109/TTE.2018.2863031

More-electric aircraft (MEA) has become a dominant trend for modern aircraft. On-board MEA, many functions, which are conventionally driven by pneumatic and hydraulic power, are replaced with electrical subsystems. Starting aircraft engines with an e... Read More about Development of aircraft electric starter-generator system based-on active rectification technology.

A Leakage-Inductance-Tolerant Commutation Strategy for Isolated AC/AC Converters (2018)
Journal Article
Nasir, U., Costabeber, A., Rivera, M., Wheeler, P., & Clare, J. (2019). A Leakage-Inductance-Tolerant Commutation Strategy for Isolated AC/AC Converters. IEEE Journal of Emerging and Selected Topics in Power Electronics, 7(1), 467-479. https://doi.org/10.1109/jestpe.2018.2861326

© 2013 IEEE. This paper proposes a generalized commutation strategy suitable for matrix-based isolated ac/ac conversion stages in solid-state transformers for use whenever there is nonnegligible leakage inductance in the isolation transformer. The st... Read More about A Leakage-Inductance-Tolerant Commutation Strategy for Isolated AC/AC Converters.

Matrix converter open circuit fault behavior analysis and diagnosis with a model predictive control strategy (2018)
Journal Article
Zhang, J., Dan, H., Empringham, L., De Lillo, L., & Wheeler, P. (2018). Matrix converter open circuit fault behavior analysis and diagnosis with a model predictive control strategy. IEEE Journal of Emerging and Selected Topics in Power Electronics, 6(4), 1831-1839. https://doi.org/10.1109/jestpe.2018.2856460

A novel fast and reliable open circuit fault diagnosis strategy for a Matrix Converter with a Finite Control Set Model Predictive Control strategy is proposed in this paper. Current sensors are located ahead of the clamp circuit to measure the output... Read More about Matrix converter open circuit fault behavior analysis and diagnosis with a model predictive control strategy.

Current fed multipulse rectifier approach for unidirectional HVDC and MVDC applications (2018)
Journal Article
Lambert, G., Vieira Soares, M., Wheeler, P., Lobo Heldwein, M., & Romulo de Novaes, Y. (in press). Current fed multipulse rectifier approach for unidirectional HVDC and MVDC applications. IEEE Transactions on Power Electronics, https://doi.org/10.1109/TPEL.2018.2849927

Even though multipulse rectifiers are a long established and well-known technology, still their behavior is not fully described in the literature when they are fed by three-phase balanced sinusoidal currents sources. To address the aforementioned gap... Read More about Current fed multipulse rectifier approach for unidirectional HVDC and MVDC applications.

Modified modulation scheme for three‐level diode‐clamped matrix converter under unbalanced input conditions (2018)
Journal Article
Su, M., Zhao, Z., Dan, H., Peng, T., Sun, Y., Che, R., …Wheeler, P. (2018). Modified modulation scheme for three‐level diode‐clamped matrix converter under unbalanced input conditions. IET Power Electronics, 11(8), 1425-1433. https://doi.org/10.1049/iet-pel.2017.0512

The three-level diode-clamped matrix converter topology has outstanding performance under ideal operating conditions. However, input disturbance can influence the waveforms at the output side of the converter due to the direct coupling between the in... Read More about Modified modulation scheme for three‐level diode‐clamped matrix converter under unbalanced input conditions.

A Modified Neutral Point Balancing Space Vector Modulation for Three-Level Neutral Point Clamped Converters in High-Speed Drives (2018)
Journal Article
Li, C., Yang, T., Kulsangcharoen, P., Lo Calzo, G., Bozhko, S., Gerada, C., & Wheeler, P. (2019). A Modified Neutral Point Balancing Space Vector Modulation for Three-Level Neutral Point Clamped Converters in High-Speed Drives. IEEE Transactions on Industrial Electronics, 66(2), 910-921. https://doi.org/10.1109/TIE.2018.2835372

© 2018 IEEE. This paper describes a high-performance neutral point voltage balancing technique for a neutral point clamped (NPC) converter. Conventional neutral point voltage balancing methods do not function well under low power factor, low pulse ra... Read More about A Modified Neutral Point Balancing Space Vector Modulation for Three-Level Neutral Point Clamped Converters in High-Speed Drives.