All Outputs (107)

Characterisation of bitumen through multiple ageing-rejuvenation cycles (2024)
Journal Article

The multiple recycling of bitumen offers the possibility of reusing it for repeated lifecycles and achieve a higher degree of circularity of materials used in pavement construction. Aiming to identify the prospect, this study aged bitumen in a labora... Read More about Characterisation of bitumen through multiple ageing-rejuvenation cycles.

Investigation of the bonding properties of bitumen using a novel modified binder bond strength test (2024)
Journal Article

The binder bond strength (BBS) test can directly quantify the bonding of bitumen-stone joints. However, the index "bond strength" used in this method cannot provide a clear distinction when evaluating the performance of various bitumen, and some resu... Read More about Investigation of the bonding properties of bitumen using a novel modified binder bond strength test.

Optimising the dosage of bio-rejuvenators in asphalt recycling: A rejuvenation index based approach (2024)
Journal Article

While significant research efforts have been devoted to the rejuvenation of aged bitumen using bio-rejuvenators, a universally recognised approach for dosage optimisation is still yet to be established. Aiming to develop standardised methods to deter... Read More about Optimising the dosage of bio-rejuvenators in asphalt recycling: A rejuvenation index based approach.

Comparative analysis of time sweep testing evaluation methods for the fatigue characterisation of aged bitumen (2024)
Journal Article

Ageing of bitumen changes its stiffness related properties and is thought to have a considerable impact on its fatigue performance. Time sweep tests are a commonly used methodology to evaluate the fatigue performance of bitumen over the course of its... Read More about Comparative analysis of time sweep testing evaluation methods for the fatigue characterisation of aged bitumen.

Examining the efficacy of promising antioxidants to mitigate asphalt binder oxidation: insights from a worldwide interlaboratory investigation (2024)
Journal Article

Oxidative aging induces significant stiffening of asphalt binders that leads to a pronounced reduction in the overall durability of asphalt pavements. The strategic implementation of antioxidant additives provides a potential solution to alleviate th... Read More about Examining the efficacy of promising antioxidants to mitigate asphalt binder oxidation: insights from a worldwide interlaboratory investigation.

A molecular dynamics analysis of the influence of iron corrosion products on the healing process of bitumen (2024)
Journal Article

Corrosion of iron materials in the asphalt concrete pavement occurs commonly when the bitumen film peels off, and the generation of corrosion products would affect the healing performance of bitumen. To identify the affection, this research focuses o... Read More about A molecular dynamics analysis of the influence of iron corrosion products on the healing process of bitumen.

Interfacial characteristics between bitumen and corrosion products on steel slag surface from molecular scale (2024)
Journal Article

Corrosion commonly happened on the surface of steel slag during the weathering and accumulation process, whose products would form weak points and affect the interface between bitumen and steel slag. To clear its characteristics in the atomic scales,... Read More about Interfacial characteristics between bitumen and corrosion products on steel slag surface from molecular scale.

Wetting of bio-rejuvenator nanodroplets on bitumen: A molecular dynamics investigation (2024)
Journal Article

Wetting is the first step during the mix process between rejuvenator and bitumen, which is important for mix efficiency and performance recovery. The wetting of bio-rejuvenator nanodroplets on bitumen was investigated by molecular dynamics (MD) simul... Read More about Wetting of bio-rejuvenator nanodroplets on bitumen: A molecular dynamics investigation.

Guidelines for the implementation of SMARTI: Sustainable Multifunctional Automated Resilient Transport Infrastructure (2023)
Journal Article

The World's transport infrastructures (TI) network is facing fast changes due to population growth, mobility, business trades and globalization. More challenges are coming from unforeseen natural and human-induced hazards, including climate change's... Read More about Guidelines for the implementation of SMARTI: Sustainable Multifunctional Automated Resilient Transport Infrastructure.

Review of methodology for life cycle assessment and life cycle cost analysis of asphalt pavements (2023)
Journal Article

Different approaches continue to be used to evaluate the environmental and financial impactsof road pavements throughout their life cycle. This paper aims to provide a methodological review of published studies of asphalt pavement Life Cycle Assessme... Read More about Review of methodology for life cycle assessment and life cycle cost analysis of asphalt pavements.

Predicting pavement performance using distress deterioration curves (2023)
Journal Article

Highway Authorities in the UK use Surface Condition Assessment for the National Network of Roads (SCANNER) in assessing and managing their road networks. This survey vehicle utilises laser measurements to detect and quantify most of the distress on t... Read More about Predicting pavement performance using distress deterioration curves.

2D Mesoscale cracking simulation of partially saturated asphalt based on moisture diffusion and a cohesive zone model (2023)
Journal Article

The primary objective of this paper was to develop a combined model that incorporates moisture diffusion and a cohesive zone model, addressing anisotropic and loading-rate dependent cracking within partially saturated asphalt. Utilising X-ray CT scan... Read More about 2D Mesoscale cracking simulation of partially saturated asphalt based on moisture diffusion and a cohesive zone model.

Engineering characterization and environmental analysis of natural rubber latex modified asphalt mixture (2023)
Journal Article

Natural Rubber Latex (NRL) has attracted considerable interest as a resource for renewable paving materials due to its potential to lessen environmental impact. In order to gain a thorough understanding of the performance of NRL, this study evaluated... Read More about Engineering characterization and environmental analysis of natural rubber latex modified asphalt mixture.

Analysis and Prediction of Pothole Formation Rate Using Spatial Density Measurements and Pavement Condition Indicators (2023)
Journal Article

Potholes represent one of the dangerous distress types on roads. They form as a result of various factors, including water ingress, freeze–thaw, and pavement condition deterioration. In the UK, 1.7 million potholes were repaired in 2021; this critica... Read More about Analysis and Prediction of Pothole Formation Rate Using Spatial Density Measurements and Pavement Condition Indicators.

Uncertainty analysis of life cycle assessment of asphalt surfacings (2023)
Journal Article

The Life Cycle Assessment (LCA) of asphalt pavements are associated with significant uncertainty resulting from variability in the quantity and impact of individual components, the quality of data for each component, and variability of asphalt durabi... Read More about Uncertainty analysis of life cycle assessment of asphalt surfacings.

Rubberised stone mastic asphalt mixtures: a performance-related evaluation (2022)
Journal Article

The binder content of rubberised asphalt mixtures is usually increased compared to that used in conventional asphalt. This increase is deemed important to compensate for the reduction in the actual bitumen due to the existence of rubber particles. Th... Read More about Rubberised stone mastic asphalt mixtures: a performance-related evaluation.

Micromechanics-Based Viscoelasticity Predictions of Crumb Rubber Modified Bitumen Considering Polymer Network Effects (2022)
Journal Article

Crumb rubber modified bitumen (CRMB) can be regarded as a binary composite system in which swollen rubber particles are embedded in the bitumen matrix. Previous study has successfully implemented the micromechanics models in predicting the complex mo... Read More about Micromechanics-Based Viscoelasticity Predictions of Crumb Rubber Modified Bitumen Considering Polymer Network Effects.

Renewable binders from waste biomass for road construction: A review on thermochemical conversion technologies and current developments (2022)
Journal Article

Biobinders (binders manufactured from biomass) are becoming popular in asphalt engineering due to growing environmental concerns of greenhouse gas emissions from the use of fossil fuels and depleting petroleum bitumen reserves. Waste biomass products... Read More about Renewable binders from waste biomass for road construction: A review on thermochemical conversion technologies and current developments.

Characterisation of fatigue damage in asphalt mixtures using X-ray computed tomography (2022)
Journal Article

The high-resolution X-ray CT was applied to investigate the fatigue damage evolution of asphalt mixtures. The detailed Xray CT images in the centre of the samples were used to characterise the fatigue cracking and air voids increase at different vert... Read More about Characterisation of fatigue damage in asphalt mixtures using X-ray computed tomography.

Black Space Rheological Assessment of Asphalt Material Behavior (2021)
Journal Article

Black Space diagrams representing rheological data of asphalt materials in the form of complex modulus (|G*| or |E*|) versus phase angle (δ) have been successfully used for interpretation of material behavior and performance. Previous studies have us... Read More about Black Space Rheological Assessment of Asphalt Material Behavior.