All Outputs (334)

Life Characterisation of PEEK and Nanofilled Enamel Insulated Wires under Thermal Ageing (2024)
Journal Article
Khowja, M. R., Vakil, G., Ahmad, S. S., Ramanathan, R., Gerada, C., & Benarous, M. (2024). Life Characterisation of PEEK and Nanofilled Enamel Insulated Wires under Thermal Ageing. IEEE Access, 12, 39470- 39483. https://doi.org/10.1109/access.2024.3374637

This paper characterizes and develops life models for two different wire insulating materials: Poly-ether-ketone (PEEK) and nanofilled enamel (Allotherm wire). The article focuses on predicting the lifespan of PEEK and Allotherm wire insulating mater... Read More about Life Characterisation of PEEK and Nanofilled Enamel Insulated Wires under Thermal Ageing.

Fillet Radius Impact of Rectangular Insulated Wires on PDIV for Turn-to-Turn Insulation of Inverter-Fed Motors (2024)
Journal Article
Naderiallaf, H., Degano, M., Gerada, C., & Gerada, D. (2024). Fillet Radius Impact of Rectangular Insulated Wires on PDIV for Turn-to-Turn Insulation of Inverter-Fed Motors. IEEE Transactions on Dielectrics and Electrical Insulation, 1-1. https://doi.org/10.1109/tdei.2024.3355032

This contribution elucidates the impact of the fillet radius, a geometric feature of rectangular insulated wires not commonly considered, on the partial discharge inception voltage (PDIV) in low-voltage machine turn-to-turn winding insulation. Initia... Read More about Fillet Radius Impact of Rectangular Insulated Wires on PDIV for Turn-to-Turn Insulation of Inverter-Fed Motors.

Reduced Computational Burden of Modulated Model-Predictive Control for Synchronous Reluctance Motor Drive Applications (2023)
Conference Proceeding
Riccio, J., Karamanakos, P., Degano, M., Gerada, C., & Zanchetta, P. (2023). Reduced Computational Burden of Modulated Model-Predictive Control for Synchronous Reluctance Motor Drive Applications. In 2023 IEEE Energy Conversion Congress and Exposition (ECCE) (4995-5002). https://doi.org/10.1109/ECCE53617.2023.10362110

This paper introduces a novel geometric approach to significantly reduce the computational burden of modulated predictive controllers while maintaining the same steady-state performance and satisfactory dynamic behavior. The proposed geometric method... Read More about Reduced Computational Burden of Modulated Model-Predictive Control for Synchronous Reluctance Motor Drive Applications.

Manufacturable Edgewise Winding Solutions Considering Parallel Slot and Parallel Tooth Stator Structures (2023)
Conference Proceeding
George, L., Walker, A., Zhang, F., Vakil, G., & Gerada, C. (2023). Manufacturable Edgewise Winding Solutions Considering Parallel Slot and Parallel Tooth Stator Structures. . https://doi.org/10.1109/oncon60463.2023.10431188

Due to climate concerns, the push towards transportation electrification to deliver electric machines capable of high-power density performance is becoming increasingly critical. A key component of this is the structure and manufacture of the winding... Read More about Manufacturable Edgewise Winding Solutions Considering Parallel Slot and Parallel Tooth Stator Structures.

A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs (2023)
Conference Proceeding
Zhu, G., Xu, Z., Zhang, F., Gerada, C., & Gerada, D. (2023). A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs. In 26th International Conference on Electrical Machines and Systems (ICEMS). https://doi.org/10.1109/icems59686.2023.10344616

Thermal management is critical for high-power-density permanent magnet synchronous machines (PMSMs). To realize the efficient and effective design optimization of self-ventilated air cooling systems for PMSMs, in this paper, a Taguchi-preconditioned... Read More about A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs.

Assessment of Edgewise Insulated Wire Bend Radius Impact on Dielectric Properties of Turn-to-Turn Insulation through Thermal Ageing (2023)
Journal Article
Naderiallaf, H., Degano, M., & Gerada, C. (2023). Assessment of Edgewise Insulated Wire Bend Radius Impact on Dielectric Properties of Turn-to-Turn Insulation through Thermal Ageing. IEEE Transactions on Dielectrics and Electrical Insulation, https://doi.org/10.1109/TDEI.2023.3309780

This study aims to evaluate the impact of the bending radius of edgewise insulated wires on dielectric properties such as partial discharge inception voltage (PDIV), partial discharge extinction voltage (PDEV), dielectric dissipation factor (DDF), an... Read More about Assessment of Edgewise Insulated Wire Bend Radius Impact on Dielectric Properties of Turn-to-Turn Insulation through Thermal Ageing.

PDIV Modelling for Rectangular Wire Turn-to-Turn Insulation of Inverter-Fed Motors through Thermal Ageing (2023)
Journal Article
Naderiallaf, H., Degano, M., & Gerada, C. (2023). PDIV Modelling for Rectangular Wire Turn-to-Turn Insulation of Inverter-Fed Motors through Thermal Ageing. IEEE Transactions on Dielectrics and Electrical Insulation, 1-10. https://doi.org/10.1109/tdei.2023.3307048

This contribution develops the partial discharge inception voltage (PDIV)-FEM-based model based on Schumann’s streamer inception criterion (SCSIC) with respect to thermal ageing time (TAGT) or the insulation lifetime for the turn-to-turn insulation o... Read More about PDIV Modelling for Rectangular Wire Turn-to-Turn Insulation of Inverter-Fed Motors through Thermal Ageing.

Rotor Vibration Control using Multi-Three-Phase Permanent Magnet Synchronous Machines (2023)
Conference Proceeding
Di Nardo, M., Ilkhani, M. R., Wang, M., Degano, M., Gerada, C., Sala, G., …Hoppert, M. (2023). Rotor Vibration Control using Multi-Three-Phase Permanent Magnet Synchronous Machines. In 2023 IEEE International Electric Machines & Drives Conference (IEMDC). https://doi.org/10.1109/IEMDC55163.2023.10238954

This paper investigates the possibility to control the radial displacements of the shaft of an electrical machine equipped with a multi-three-phase winding arrangement with the aim of reducing the related vibrations. A comprehensive dynamic modeling... Read More about Rotor Vibration Control using Multi-Three-Phase Permanent Magnet Synchronous Machines.

Design of an aircraft generator with radial force control. (2023)
Journal Article
Brecher, C., Neus, S., Gärtner, M., Eckel, H., Hoppert, M., James, B., …Di Nardo, M. (2023). Design of an aircraft generator with radial force control. Open Research Europe, 2, Article 73. https://doi.org/10.12688/openreseurope.14684.3

With the increasing electrical energy demands in aviation propulsion systems, the increase in the onboard generators’ power density is inevitable. During the flight, forces coming from the gearbox or gyroscopic forces generated by flight manoeuvres l... Read More about Design of an aircraft generator with radial force control..

Analytical Calculation and Experimental Validation of Litz Wires Axial Thermal Conductivity (2023)
Journal Article
Li, Z., Xu, Z., Zhang, F., Gerada, D., Guo, R., Zhang, H., …Zhang, C. (2023). Analytical Calculation and Experimental Validation of Litz Wires Axial Thermal Conductivity. IEEE Transactions on Transportation Electrification, 1-1. https://doi.org/10.1109/TTE.2023.3262766

Litz wires are widely used in electrical machines with reduced AC losses, compared to traditional random winding. The reduced AC losses can improve both electrical machines electromagnetic performance, such as efficiency and thermal performance. Ther... Read More about Analytical Calculation and Experimental Validation of Litz Wires Axial Thermal Conductivity.

Radical technology innovations for high‐speed transport; ePlanes to replace rail? (2023)
Journal Article
Riley, P. H., Degano, M., & Gerada, C. (2023). Radical technology innovations for high‐speed transport; ePlanes to replace rail?. IET Electrical Systems in Transportation, 13(1), Article 12061. https://doi.org/10.1049/els2.12061

This paper evaluates various modes of transport against the dual requirements of Net-Zero carbon emissions and user convenience, in particular, speed of travel and cost of transportation. Results show that when operated across a whole country, batter... Read More about Radical technology innovations for high‐speed transport; ePlanes to replace rail?.

AC/DC Converter Topologies Comparison for More Electric Aircraft Applications (2022)
Conference Proceeding
Khera, F. A., Gerada, C., Bozhko, S., & Wheeler, P. W. (2022). AC/DC Converter Topologies Comparison for More Electric Aircraft Applications. In 2022 IEEE 7th Southern Power Electronics Conference (SPEC). https://doi.org/10.1109/SPEC55080.2022.10058465

This paper compares the potential AC/DC power converter topologies that are appropriate for medium voltage and medium/high power aircraft applications. The power converter's rated power and the DC distribution voltage level in this application assume... Read More about AC/DC Converter Topologies Comparison for More Electric Aircraft Applications.

Surface Permanent Magnet Synchronous Machines: High Speed Design and Limits (2022)
Journal Article
Gallicchio, G., Nardo, M. D., Palmieri, M., Ilkhani, M. R., Degano, M., Gerada, C., & Cupertino, F. (2023). Surface Permanent Magnet Synchronous Machines: High Speed Design and Limits. IEEE Transactions on Energy Conversion, 38(2), 1311-1324. https://doi.org/10.1109/tec.2022.3225224

Surface permanent magnet synchronous machines are one of the most widely adopted machine topologies in high-speed applications where efficiency and power factor cannot be compromised. Although the design of such machine type has been extensively inve... Read More about Surface Permanent Magnet Synchronous Machines: High Speed Design and Limits.

Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction (2022)
Journal Article
Zou, T., Gerada, D., La Rocca, S., La Rocca, A., Walker, A., Vakil, G., …Gerada, C. (2023). Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction. IEEE Transactions on Industry Applications, 59(2), 1557-1570. https://doi.org/10.1109/TIA.2022.3225255

Synchronous reluctance (Syn-Rel) machines with embedded permanent magnets (PMs) are research hotspots in variable speed motor drives due to their robust rotor structure and wide constant power speed range (CPSR). In this paper, the potential of PM-as... Read More about Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction.

2-DOF Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios (2022)
Journal Article
Wang, M., Buticchi, G., Li, J., Gu, C., Gerada, D., Degano, M., …Gerada, C. (2023). 2-DOF Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios. IEEE Transactions on Transportation Electrification, 9(2), 2048-2058. https://doi.org/10.1109/TTE.2022.3210909

In high performance drive systems, wide bandwidth and reference tracking accuracy of current control loop are fundamental requirements. The conventional PI controller provides robustness against the machine parameter mismatching and zero steady-state... Read More about 2-DOF Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios.

Comparative Stability Analysis of Synchronous Reference Frame Current Controllers Operated at High Fundamental Frequency (2022)
Journal Article
Diab, A. M., Guo, F., Yeoh, S. S., Bozhko, S., Gerada, C., & Galea, M. (2022). Comparative Stability Analysis of Synchronous Reference Frame Current Controllers Operated at High Fundamental Frequency. IEEE Transactions on Transportation Electrification, https://doi.org/10.1109/TTE.2022.3208825

Synchronous reference frame (SRF) proportional-integral (PI) current controller (CC) is the most well-established solution for current regulation in AC machine drives and grid-connected voltage source converters. The design of high dynamic performanc... Read More about Comparative Stability Analysis of Synchronous Reference Frame Current Controllers Operated at High Fundamental Frequency.

Modelling, Analysis, and Design of a Line-Start Permanent Magnet Synchronous Motor (2022)
Conference Proceeding
Vannini, A., Simonelli, C., Marfoli, A., Papini, L., Bolognesi, P., & Gerada, C. (2022). Modelling, Analysis, and Design of a Line-Start Permanent Magnet Synchronous Motor. . https://doi.org/10.1109/icem51905.2022.9910937

Line-Start Permanent Magnet Motors are a valid alternative to conventional three-phase induction motors and wound-field synchronous machines for fixed-speed applications direct fed by the grid, targeting superior efficiency and high reliability. A ge... Read More about Modelling, Analysis, and Design of a Line-Start Permanent Magnet Synchronous Motor.

Concept and Preliminary Sizing of a Dual DC-Bus Homopolar Generator Using Diode Rectifiers (2022)
Conference Proceeding
Vannini, A., Papini, L., Marfoli, A., Gerada, C., & Bolognesi, P. (2022). Concept and Preliminary Sizing of a Dual DC-Bus Homopolar Generator Using Diode Rectifiers. In 2022 International Conference on Electrical Machines (ICEM) (2074-2080). https://doi.org/10.1109/icem51905.2022.9910897

Synchronous Homopolar Generators represent an attractive solution for the future of power generation in propulsive systems based on hybrid turbo-electric drivetrains. In fact they feature both a fully controllable excitation, similar to wound-field s... Read More about Concept and Preliminary Sizing of a Dual DC-Bus Homopolar Generator Using Diode Rectifiers.

Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications (2022)
Conference Proceeding
Tameemi, A., Degano, M., Di Nardo, M., Murataliyev, M., Gerada, D., Xu, Z., & Gerada, C. (2022). Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications. In 2022 International Conference on Electrical Machines (ICEM) (807-813). https://doi.org/10.1109/icem51905.2022.9910911

Permanent magnet synchronous motors are very suitable in applications demanding high power density with high performance requirements, such as in aerospace actuators. Achieving high performance targets while keeping the total weight of the electrical... Read More about Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications.

Investigating Synchronous Reluctance Rotor Performance for Traction Applications against a Permanent Magnet Benchmark (2022)
Conference Proceeding
Connor, P. H., Khowja, M., La Rocca, A., La Rocca, S., Zou, T., Vakil, G., …Paciura, K. (2022). Investigating Synchronous Reluctance Rotor Performance for Traction Applications against a Permanent Magnet Benchmark. . https://doi.org/10.1109/icem51905.2022.9910649

This paper investigates the potential benefits for the use of synchronous reluctance machines for traction applications. Permanent magnet machines are often used to generate the highest power densities. However, magnet use has drawbacks including tem... Read More about Investigating Synchronous Reluctance Rotor Performance for Traction Applications against a Permanent Magnet Benchmark.