All Outputs (91)

Dispersion and stability of colloidal boron carbide suspensions (2020)
Journal Article

The effects of several anionic, cationic and non-ionic polyelectrolyte dispersants on the stability and rheology of aqueous boron carbide (B4C) suspensions were investigated using zeta potential measurements, settling experiments, and rheological stu... Read More about Dispersion and stability of colloidal boron carbide suspensions.

BIM-to-IGA: A fully automatic design-through-analysis workflow for segmented tunnel linings (2020)
Journal Article

On-machine focus variation measurement for micro-scale hybrid surface texture machining (2020)
Journal Article

Fast and accurate in-line areal surface topography measuring instruments are required to control the quality of microscale manufactured components, without significantly slowing down the production process. Full-field areal optical surface topography... Read More about On-machine focus variation measurement for micro-scale hybrid surface texture machining.

An evaluation of an adaptive learning system based on multimodal affect recognition for learners with intellectual disabilities (2020)
Journal Article

Artificial intelligence tools for education (AIEd) have been used to automate the provision of learning support to mainstream learners. One of the most innovative approaches in this field is the use of data and machine learning for the detection of a... Read More about An evaluation of an adaptive learning system based on multimodal affect recognition for learners with intellectual disabilities.

Modelling interactions between multiple bridge deterioration mechanisms (2020)
Journal Article

Bridge asset managers are tasked with developing effective maintenance strategies by the stakeholders of transportation networks. Any presentation of maintenance strategies requires an estimate of the consequence on the Whole Life Cycle Cost (WLCC),... Read More about Modelling interactions between multiple bridge deterioration mechanisms.

Slot Number Thermal Effects on Electrical Machines (2020)
Journal Article

An anisotropic cohesive phase field model for quasi-brittle fractures in thin fibre-reinforced composites (2020)
Journal Article

A novel approach to incorporate graphene nanoplatelets to Cr2O3 for low-wear coatings (2020)
Journal Article

© 2020 Cr2O3 (chromia) coatings have been widely used in wear and corrosion resistant applications thanks to their good tribomechanical properties, and graphene nanoplatelets (GNPs) have been employed as nanofillers to further improve these propertie... Read More about A novel approach to incorporate graphene nanoplatelets to Cr2O3 for low-wear coatings.

Effects of ageing on the damage tolerance of polymer modified bitumens investigated through the LAS test and fluorescence microscopy (2020)
Journal Article

The effects of polymer modification on the durability of Polymer Modified Bitumens (PMBs) still remain relatively unclear due to partial understanding of the combined effects of ageing and loading on damage accumulation. This paper investigates the e... Read More about Effects of ageing on the damage tolerance of polymer modified bitumens investigated through the LAS test and fluorescence microscopy.

Analysis and Modelling of High Frequency Effects on Synchronous Generator’s Armature Conductors (2020)
Conference Proceeding

This paper investigates the accuracy of the subdomain modelling technique for high frequency copper loss calculation in stator windings of synchronous generators. The methodology's accuracy is studied at a slot level up to 10 kHz against FE model wit... Read More about Analysis and Modelling of High Frequency Effects on Synchronous Generator’s Armature Conductors.

Feasibility Design Study of High-Performance, High-Power-Density Propulsion Motor for Middle-Range Electric Aircraft (2020)
Conference Proceeding

This paper deals with the design of a high power-density, high efficiency and low torque ripple propulsion motor for electric aircraft. The proposed design procedure resulted in a high-performance propulsion motor intended for a direct-drive solution... Read More about Feasibility Design Study of High-Performance, High-Power-Density Propulsion Motor for Middle-Range Electric Aircraft.

A Hybrid Computational Tool to Analyze the Performance of Electric Machines with Reduced Content of Permanent Magnet (2020)
Conference Proceeding

Electric vehicles (EVs) are equipped with interior permanent magnet (IPM) or permanent magnet assisted synchronous reluctance (PM-SynRel) machines because of their superior performance in field weakening region. The effect of saturation is more prono... Read More about A Hybrid Computational Tool to Analyze the Performance of Electric Machines with Reduced Content of Permanent Magnet.

Measurement of complex freeform additively manufactured parts by structured light and photogrammetry (2020)
Journal Article

A phenomenological constitutive model for the viscoelastic deformation of elastomers (2020)
Journal Article

This study proposes a one-dimensional constitutive model for elastomeric materials based on recent observations regarding the separation of elastic and viscous contributions in uniaxial cyclic tensile experiments on EPDM rubber. The focus is on captu... Read More about A phenomenological constitutive model for the viscoelastic deformation of elastomers.

Dynamic Crystallization Pathways of Polymorphic Pharmaceuticals Revealed in Segmented Flow with Inline Powder X-ray Diffraction (2020)
Journal Article

Feature-based characterisation of Ti6Al4V electron beam powder bed fusion surfaces fabricated at different surface orientations (2020)
Journal Article

Due to the layer-based nature of the powder bed fusion (PBF) process, part surfaces oriented in space at varying angles with respect to the build direction are differently affected by a wide array of manufacturing-induced phenomena (staircase effects... Read More about Feature-based characterisation of Ti6Al4V electron beam powder bed fusion surfaces fabricated at different surface orientations.

Apparent attenuation by opto-acoustic defocus in phonon microscopy (2020)
Journal Article

© 2020 The Author(s) Understanding the mechanical properties of biological cells is a challenging problem for the life sciences partly because there are limited methods for mapping elasticity with high resolution. Phonon microscopy is a form of Brill... Read More about Apparent attenuation by opto-acoustic defocus in phonon microscopy.

Graphitic Carbon Nitride: An Excellent Base for Composite Electrodes in Electrochemical Energy Conversion and Storage (2020)
Journal Article

Enhancing Drivers’ Awareness of Passing Pedestrians with Exocentric Digital Mirrors (2020)
Conference Proceeding

Digital mirrors are expected to feature in next generation cars. Ongoing technological developments in on-board cameras, sensors and sensor-fusing algorithms means that future drivers could be provided with novel visualisations that are not limited t... Read More about Enhancing Drivers’ Awareness of Passing Pedestrians with Exocentric Digital Mirrors.

Structural identification for layered composites through a waves and finite elements (2020)
Conference Proceeding

A novel approach for identifying the geometric and material characteristics of layered composite structures through an inverse wave and finite element methodology is proposed. These characteristics are obtained through multi-frequency single shot mea... Read More about Structural identification for layered composites through a waves and finite elements.