All Outputs (18)

Enabling High-fidelity Personalized Pharmaceutical Tablets through Multimaterial Inkjet 3D Printing with a Water-soluble Excipient (2024)
Journal Article
Rivers, G., Lion, A., Rofiqoh Eviana Putri, N., Rance, G., Moloney, C., Taresco, V., …He, Y. (in press). Enabling High-fidelity Personalized Pharmaceutical Tablets through Multimaterial Inkjet 3D Printing with a Water-soluble Excipient. Materials Today Advances,

Additive manufacturing offers manufacture of personalised pharmaceutical tablets through design freedoms and material deposition control at an individual voxel level. This control goes beyond geometry and materials choices: inkjet based 3D printing e... Read More about Enabling High-fidelity Personalized Pharmaceutical Tablets through Multimaterial Inkjet 3D Printing with a Water-soluble Excipient.

A facile one step route that introduces functionality to polymer powders for laser sintering (2024)
Journal Article
Krumins, E., Crawford, L. A., Rogers, D. M., Machado, F., Taresco, V., East, M., …Howdle, S. M. (2024). A facile one step route that introduces functionality to polymer powders for laser sintering. Nature Communications, 15(1), Article 3137. https://doi.org/10.1038/s41467-024-47376-4

Laser Sintering (LS) is a type of Additive Manufacturing (AM) exploiting laser processing of polymeric particles to produce 3D objects. Because of its ease of processability and thermo-physical properties, polyamide-12 (PA-12) represents ~95% of the... Read More about A facile one step route that introduces functionality to polymer powders for laser sintering.

Co-delivery of curcumin and resveratrol by folic acid-conjugated poly(glycerol adipate) nanoparticles for enhanced synergistic anticancer effect against osteosarcoma (2024)
Journal Article
Wongrakpanich, A., Bui Thi Thu, H., Sakchaisri, K., Taresco, V., Cuzzucoli Crucitti, V., Bunsupa, S., & Suksiriworapong, J. (2024). Co-delivery of curcumin and resveratrol by folic acid-conjugated poly(glycerol adipate) nanoparticles for enhanced synergistic anticancer effect against osteosarcoma. Journal of Drug Delivery Science and Technology, 95, Article 105610. https://doi.org/10.1016/j.jddst.2024.105610

This study explored the co-delivery of curcumin (CUR) and resveratrol (RV) using folic acid-conjugated poly(glycerol adipate)-based nanoparticles (FPPC NPs) to enhance their synergistic anticancer effects against osteosarcoma. Based on synergistic to... Read More about Co-delivery of curcumin and resveratrol by folic acid-conjugated poly(glycerol adipate) nanoparticles for enhanced synergistic anticancer effect against osteosarcoma.

Glycerol-based sustainably sourced resin for volumetric printing (2024)
Journal Article
Krumins, E., Lentz, J. C., Sutcliffe, B., Sohaib, A., Jacob, P. L., Brugnoli, B., …Taresco, V. (2024). Glycerol-based sustainably sourced resin for volumetric printing. Green Chemistry, 26(3), 1345-1355. https://doi.org/10.1039/d3gc03607c

Volumetric Additive Manufacturing (VAM) represents a revolutionary advancement in the field of Additive Manufacturing, as it allows for the creation of objects in a single, cohesive process, rather than in a layer-by-layer approach. This innovative t... Read More about Glycerol-based sustainably sourced resin for volumetric printing.

Modification of Poly(Glycerol Adipate) with Tocopherol and Cholesterol Modulating Nanoparticle Self-Assemblies and Cellular Responses of Triple-Negative Breast Cancer Cells to SN-38 Delivery (2023)
Journal Article
Suksiriworapong, J., Achayawat, C., Juangrattanakamjorn, P., Taresco, V., Cuzzucoli Crucitti, V., Sakchaisri, K., & Bunsupa, S. (2023). Modification of Poly(Glycerol Adipate) with Tocopherol and Cholesterol Modulating Nanoparticle Self-Assemblies and Cellular Responses of Triple-Negative Breast Cancer Cells to SN-38 Delivery. Pharmaceutics, 15(8), Article 2100. https://doi.org/10.3390/pharmaceutics15082100

This study aimed to fabricate new variations of glycerol-based polyesters by grafting poly(glycerol adipate) (PGA) with hydrophobic bioactive moieties, tocopherol (TOC), and cholesterol (CHO). Their effects on nanoparticle (NP) formation, drug releas... Read More about Modification of Poly(Glycerol Adipate) with Tocopherol and Cholesterol Modulating Nanoparticle Self-Assemblies and Cellular Responses of Triple-Negative Breast Cancer Cells to SN-38 Delivery.

Poly (diglycerol adipate) variants as enhanced nanocarrier replacements in drug delivery applications (2023)
Journal Article
Jacob, P. L., Brugnoli, B., Del Giudice, A., Phan, H., Chauhan, V. M., Beckett, L., …Taresco, V. (2023). Poly (diglycerol adipate) variants as enhanced nanocarrier replacements in drug delivery applications. Journal of Colloid and Interface Science, 641, 1043-1057. https://doi.org/10.1016/j.jcis.2023.03.124

Sustainably derived poly(glycerol adipate) (PGA) has been deemed to deliver all the desirable features expected in a polymeric scaffold for drug-delivery, including biodegradability, biocompatibility, self-assembly into nanoparticles (NPs) and a func... Read More about Poly (diglycerol adipate) variants as enhanced nanocarrier replacements in drug delivery applications.

Oxidation of Monoterpenes to Form Diols and Triols: A Versatile Toolbox for Polymer Synthesis (2023)
Journal Article
Fowler, H. R., O'Brien, D. M., Keddie, D. J., Alexander, C., Irvine, D. J., Stockman, R. A., …Taresco, V. (2023). Oxidation of Monoterpenes to Form Diols and Triols: A Versatile Toolbox for Polymer Synthesis. Macromolecular Chemistry and Physics, 224(8), Article 2200446. https://doi.org/10.1002/macp.202200446

Polyols and polyacrylates have a wide range of applications in polymer synthesis as monomers, initiators, or building blocks in a variety of polymerization reaction types. With an ever-growing need to reduce the global dependency on fossil fuels, fin... Read More about Oxidation of Monoterpenes to Form Diols and Triols: A Versatile Toolbox for Polymer Synthesis.

Predictive Molecular Design and Structure–Property Validation of Novel Terpene-Based, Sustainably Sourced Bacterial Biofilm-Resistant Materials (2023)
Journal Article
Cuzzucoli Crucitti, V., Ilchev, A., Moore, J. C., Fowler, H. R., Dubern, J., Sanni, O., …Irvine, D. J. (2023). Predictive Molecular Design and Structure–Property Validation of Novel Terpene-Based, Sustainably Sourced Bacterial Biofilm-Resistant Materials. Biomacromolecules, https://doi.org/10.1021/acs.biomac.2c00721

Presented in this work is the use of a molecular descriptor, termed the α parameter, to aid in the design of a series of novel, terpene-based, and sustainable polymers that were resistant to biofilm formation by the model bacterial pathogen Pseudomon... Read More about Predictive Molecular Design and Structure–Property Validation of Novel Terpene-Based, Sustainably Sourced Bacterial Biofilm-Resistant Materials.

Sustainable ABA triblock methacrylate copolymers incorporating both high and low Tg terpene-derived monomers (2022)
Journal Article
Atkinson, R. L., Elsmore, M., Smith, S., Reynolds-Green, M., Topham, P. D., Toolan, D. T., …Howdle, S. M. (2022). Sustainable ABA triblock methacrylate copolymers incorporating both high and low Tg terpene-derived monomers. European Polymer Journal, 179, Article 11567. https://doi.org/10.1016/j.eurpolymj.2022.111567

We report the synthesis of novel terpene-based monomers: nopinyl acrylate and methacrylate, from naturally abundant β-pinene. A very high Tg value was observed for poly(nopinyl methacrylate) when synthesised by free radical polymerisation, and well-d... Read More about Sustainable ABA triblock methacrylate copolymers incorporating both high and low Tg terpene-derived monomers.

A self-crosslinking monomer, α-pinene methacrylate: understanding and exploiting hydrogen abstraction (2022)
Journal Article
Monaghan, O. R., Skowron, S. T., Moore, J. C., Pin-Nó, M., Kortsen, K., Atkinson, R. L., …Howdle, S. M. (2022). A self-crosslinking monomer, α-pinene methacrylate: understanding and exploiting hydrogen abstraction. Polymer Chemistry, 13(39), 5557-5567. https://doi.org/10.1039/d2py00878e

Crosslinking is a valuable route to creating new polymeric materials and normally involves introduction of a cross linker or some form of secondary processing. Here we report the discovery and analysis of a self-crosslinking sustainable terpene deriv... Read More about A self-crosslinking monomer, α-pinene methacrylate: understanding and exploiting hydrogen abstraction.

Antimicrobial ‘inks’ for 3D printing: block copolymer-silver nanoparticle composites synthesised using supercritical CO2 (2022)
Journal Article
Larder, R. R., Krumins, E., Jacob, P. L., Kortsen, K., Cavanagh, R., Jiang, L., …Howdle, S. M. (2022). Antimicrobial ‘inks’ for 3D printing: block copolymer-silver nanoparticle composites synthesised using supercritical CO2. Polymer Chemistry, 13(25), 3768-3779. https://doi.org/10.1039/d2py00398h

Silver nanoparticles (AgNP) are widely exploited for their effective antimicrobial activity against a range of pathogens. Their high efficacy in this regard has seen the global demand for AgNP in consumer products steadily increase in recent years, n... Read More about Antimicrobial ‘inks’ for 3D printing: block copolymer-silver nanoparticle composites synthesised using supercritical CO2.

Correction to “Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers” (2022)
Journal Article
Ruiz-Cantu, L., Trindade, G. F., Taresco, V., Zhou, Z., He, Y., Burroughs, L., …Wildman, R. D. (2022). Correction to “Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers”. ACS Applied Materials and Interfaces, 14(6), 8654. https://doi.org/10.1021/acsami.2c00035

The chemical structure of the drug trandolapril has been corrected in Figure 4c. The conclusions of the work have not been affected by this correction. (Figure present).

Generation and Characterization of a Library of Novel Biologically Active Functional Surfactants (Surfmers) Using Combined High-Throughput Methods (2021)
Journal Article
Cuzzucoli Crucitti, V., Contreas, L., Taresco, V., Howard, S. C., Dundas, A. A., Limo, M. J., …Irvine, D. J. (2021). Generation and Characterization of a Library of Novel Biologically Active Functional Surfactants (Surfmers) Using Combined High-Throughput Methods. ACS Applied Materials and Interfaces, 13(36), 43290-43300. https://doi.org/10.1021/acsami.1c08662

We report the first successful combination of three distinct high-throughput techniques to deliver the accelerated design, synthesis, and property screening of a library of novel, bio-instructive, polymeric, comb-graft surfactants. These three-dimens... Read More about Generation and Characterization of a Library of Novel Biologically Active Functional Surfactants (Surfmers) Using Combined High-Throughput Methods.

Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers (2021)
Journal Article
Ruiz-Cantu, L., Trindade, G. F., Taresco, V., Zhou, Z., He, Y., Burroughs, L., …Wildman, R. D. (2021). Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers. ACS Applied Materials and Interfaces, 13(33), 38969-38978. https://doi.org/10.1021/acsami.1c07850

Controlling the microstructure of materials by means of phase separation is a versatile tool for optimizing material properties. Phase separation has been exploited to fabricate intricate microstructures in many fields including cell biology, tissue... Read More about Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers.

Poly (glycerol adipate) (PGA) backbone modifications with a library of functional diols: Chemical and physical effects (2021)
Journal Article
Jacob, P. L., Ruiz Cantu, L. A., Pearce, A. K., He, Y., Lentz, J. C., Moore, J. C., …Taresco, V. (2021). Poly (glycerol adipate) (PGA) backbone modifications with a library of functional diols: Chemical and physical effects. Polymer, 228, Article 123912. https://doi.org/10.1016/j.polymer.2021.123912

Enzymatically synthesised poly(glycerol adipate) (PGA) has shown a palette of key desirable properties required for a biomaterial to be considered a ‘versatile polymeric tool’ in the field of drug delivery. PGA and its variations can self-assemble in... Read More about Poly (glycerol adipate) (PGA) backbone modifications with a library of functional diols: Chemical and physical effects.

RAFT polymerisation of renewable terpene (meth)acrylates and the convergent synthesis of methacrylate-acrylate-methacrylate triblock copolymers (2021)
Journal Article
Atkinson, R. L., Monaghan, O., Elsmore, M. T., Topham, P. D., Toolan, D. T. W., Derry, M. J., …Howdle, S. M. (2021). RAFT polymerisation of renewable terpene (meth)acrylates and the convergent synthesis of methacrylate-acrylate-methacrylate triblock copolymers. Polymer Chemistry, 12(21), 3177-3189. https://doi.org/10.1039/d1py00326g

Terpenes are ideal candidates for sustainable polymer feedstocks, due to their natural abundance and availability from existing waste streams. Previously, we have shown that a range of terpene(meth)acrylate monomers can be synthesised from the most c... Read More about RAFT polymerisation of renewable terpene (meth)acrylates and the convergent synthesis of methacrylate-acrylate-methacrylate triblock copolymers.

Synthesis of water-soluble surfactants using catalysed condensation polymerisation in green reaction media (2021)
Journal Article
Goddard, A. R., Apebende, E. A., Lentz, J. C., Carmichael, K., Taresco, V., Irvine, D. J., & Howdle, S. M. (2021). Synthesis of water-soluble surfactants using catalysed condensation polymerisation in green reaction media. Polymer Chemistry, https://doi.org/10.1039/d1py00415h

Sustainable and biobased surfactants are required for a wide range of everyday applications. Key drivers are cost, activity and efficiency of production. Polycondensation is an excellent route to build surfactant chains from bio-sourced monomers, but... Read More about Synthesis of water-soluble surfactants using catalysed condensation polymerisation in green reaction media.

Etoposide and olaparib polymer-coated nanoparticles within a bioadhesive sprayable hydrogel for post-surgical localised delivery to brain tumours (2020)
Journal Article
McCrorie, P., Mistry, J., Taresco, V., Lovato, T., Fay, M., Ward, I., …Rahman, R. (2020). Etoposide and olaparib polymer-coated nanoparticles within a bioadhesive sprayable hydrogel for post-surgical localised delivery to brain tumours. European Journal of Pharmaceutics and Biopharmaceutics, 157, 108-120. https://doi.org/10.1016/j.ejpb.2020.10.005

Glioblastoma is a malignant brain tumour with a median survival of 14.6 months from diagnosis. Despite maximal surgical resection and concurrent chemoradiotherapy, reoccurrence is inevitable. To try combating the disease at a stage of low residual tu... Read More about Etoposide and olaparib polymer-coated nanoparticles within a bioadhesive sprayable hydrogel for post-surgical localised delivery to brain tumours.