All Outputs (8)

Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier (2019)
Conference Proceeding
Kumar, R. M. R., Vakil, G., Gerada, D., Walker, A., La Rocca, S., Al-Ani, M., …Fernandes, B. G. (2019). Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier. In IECON 2019 Proceedings - 45th Annual Conference of the IEEE Industrial Electronics Society (4347-4352). https://doi.org/10.1109/IECON.2019.8926624

Electrical machines with high torque density are required for traction application. Availability of bonded magnets with complex shapes and magnetization pattern can significantly extend the design space of electrical machines. This paper introduces a... Read More about Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier.

High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles (2019)
Conference Proceeding
Kumar, R. M. R., Zou, T., La Rocca, A., Vakil, G., Gerada, D., Walker, A., …Fernandes, B. G. (2019). High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles. In IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (1083-1088). https://doi.org/10.1109/IECON.2019.8927523

High power density and high torque density are the fundamental requirements for electric machines used in traction application. The former is obtained by potentially increasing the speed of the machine while the latter by using high energy density ra... Read More about High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles.

Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle (2019)
Conference Proceeding
La Rocca, S., La Rocca, A., Walker, A., Vakil, G., Gerada, D., Al-Ani, M., …Paciura, K. (2019). Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle. In Proceedings: 2019 International Conference on Electrotechnical Complexes and Systems (ICOECS) (1-5). https://doi.org/10.1109/ICOECS46375.2019.8949929

Computational Fluid Dynamics (CFD) was used to carry out a fluid flow and thermal investigation of a high power dense traction machine for electric commercial vehicle. One of the features of the machine design considered is the high Length/Diameter (... Read More about Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle.

Improved thermal management and analysis for stator end-windings of electrical machines (2018)
Journal Article
Madonna, V., Walker, A., Giangrande, P., Serra, G., Gerada, C., & Galea, M. (2019). Improved thermal management and analysis for stator end-windings of electrical machines. IEEE Transactions on Industrial Electronics, 66(7), 5057-5069. https://doi.org/10.1109/tie.2018.2868288

In electrical machine design, thermal management plays a key role in improving performance and reducing size. End-windings are commonly identified as the machine hot-spot. Hence, lowering and predicting end-windings temperature are crucial tasks in t... Read More about Improved thermal management and analysis for stator end-windings of electrical machines.

Novel core designs to miniaturise passive magnetic components (2018)
Conference Proceeding
Walker, A., Vakil, G., & Gerada, C. (2018). Novel core designs to miniaturise passive magnetic components. In NA

Converter sizes are often dominated by passive magnetic components. Passive magnetic component sizes are in turn limited by electromagnetic saturation and thermal limits. This paper covers two modifications to the air gaps of tape wound amorphous mag... Read More about Novel core designs to miniaturise passive magnetic components.

Evaluation of isolated DC/DC converter topologies for future HVDC aerospace microgrids (2017)
Conference Proceeding
Tarisciotti, L., Costabeber, A., Linglin, C., Walker, A., & Galea, M. (2017). Evaluation of isolated DC/DC converter topologies for future HVDC aerospace microgrids. In ECCE 2017: IEEE Conversion Congress & Expo (2238-2245). https://doi.org/10.1109/ECCE.2017.8096437

High performance power conversion equipment is currently gaining an increasing interest for aircraft applications. In particular, isolated bidirectional DC/DC converters are often proposed for modern HVDC aircraft distribution systems. For such reaso... Read More about Evaluation of isolated DC/DC converter topologies for future HVDC aerospace microgrids.

Design optimization of a short-term duty electrical machine for extreme environment (2017)
Journal Article
Arumugam, P., Amankwah, E. K., Walker, A., & Gerada, C. (2017). Design optimization of a short-term duty electrical machine for extreme environment. IEEE Transactions on Industrial Electronics, 64(12), 9784-9794. https://doi.org/10.1109/TIE.2017.2711555

This paper presents design optimisation of a short term duty electrical machine for extreme environments of high temperature and high altitudes. For such extreme environmental conditions of above 80⁰C and altitudes of 30km, thermal loading limits are... Read More about Design optimization of a short-term duty electrical machine for extreme environment.

Development and design of a high performance traction machine for the FreedomCar 2020 traction machine targets (2016)
Conference Proceeding
Walker, A., Galea, M., Gerada, D., Gerada, C., Mebraki, A., & Brown, N. (2016). Development and design of a high performance traction machine for the FreedomCar 2020 traction machine targets. In Proceedings - 2016 XXII International Conference on Electrical Machines (ICEM) (1611-1617). https://doi.org/10.1109/ICELMACH.2016.7732739

This paper details the design process of a high performance electrical machine with the objective of achieving US Department of Energy FreedomCar 2020 targets, namely meeting the high speed efficiency requirement without sacrificing performance elsew... Read More about Development and design of a high performance traction machine for the FreedomCar 2020 traction machine targets.