All Outputs (103)

Remotely controlled in situ growth of silver microwires forming bioelectronic interfaces (2019)
Journal Article
Sanjuan-Alberte, P., Saleh, E., Shaw, A. J., Lacalendola, N., Willmott, G., Vaithilingam, J., Alexander, M. R., Hague, R. J. M., & Rawson, F. J. (2019). Remotely controlled in situ growth of silver microwires forming bioelectronic interfaces. ACS Applied Materials and Interfaces, 11(9), 8928-8936. https://doi.org/10.1021/acsami.8b22075

There is a pressing need to advance our ability to construct three-dimensional (3D) functional bioelectronic interfaces. Additionally, to ease the transition to building cellular electronic systems, a remote approach to merge electrical components wi... Read More about Remotely controlled in situ growth of silver microwires forming bioelectronic interfaces.

Chemical Imaging of Buried Interfaces in Organic-Inorganic Devices Using Focused Ion Beam-Time-of-Flight-Secondary-Ion Mass Spectrometry (2019)
Journal Article
Tiddia, M., Mihara, I., Seah, M. P., Trindade, G. F., Kollmer, F., Roberts, C. J., Hague, R., Mula, G., Gilmore, I. S., & Havelund, R. (2019). Chemical Imaging of Buried Interfaces in Organic-Inorganic Devices Using Focused Ion Beam-Time-of-Flight-Secondary-Ion Mass Spectrometry. ACS Applied Materials and Interfaces, 11(4), 4500-4506. https://doi.org/10.1021/acsami.8b15091

Copyright © 2019 American Chemical Society. Organic-inorganic hybrid materials enable the design and fabrication of new materials with enhanced properties. The interface between the organic and inorganic materials is often critical to the device's pe... Read More about Chemical Imaging of Buried Interfaces in Organic-Inorganic Devices Using Focused Ion Beam-Time-of-Flight-Secondary-Ion Mass Spectrometry.

Reactive material jetting of polyimide insulators for complex circuit board design (2018)
Journal Article
Zhang, F., Saleh, E., Vaithilingam, J., Li, Y., Tuck, C., Hague, R., Wildman, R., & He, Y. (2019). Reactive material jetting of polyimide insulators for complex circuit board design. Additive Manufacturing, 25, 477-484. https://doi.org/10.1016/j.addma.2018.11.017

Polyimides are a group of high performance thermal stable dielectric materials used in diverse applications. In this article, we synthesized and developed a high-performance polyimide precursor ink for a Material Jetting (MJ) process. The proposed in... Read More about Reactive material jetting of polyimide insulators for complex circuit board design.

Wireless bioelectronic nanosystems for intracellular communication (2018)
Other
Sanjuán-Alberte, P., Abayzeed, S. A., Fuentes-Domínguez, R., Alea-Reyesd, M. E., Clark, M., Hague, R., Alexander, M., Pérez-García, L., & Rawson, F. (2018). Wireless bioelectronic nanosystems for intracellular communication

In order for the field of bioelectronics to make an impact on healthcare, there is an urgent requirement for the development of “wireless” electronic systems to both sense and actuate cell behaviour. Herein we report the first example of an innovativ... Read More about Wireless bioelectronic nanosystems for intracellular communication.

Optimisation of substrate angles for multi-material and multi-functional inkjet printing (2018)
Journal Article
Vaithilingam, J., Saleh, E., Wildman, R. D., Hague, R. J., & Tuck, C. (2018). Optimisation of substrate angles for multi-material and multi-functional inkjet printing. Scientific Reports, 8, Article 9030. https://doi.org/10.1038/s41598-018-27311-6

Three dimensional inkjet printing of multiple materials for electronics applications are challenging due to the limited material availability, inconsistencies in layer thickness between dissimilar materials and the need to expose the printed tracks o... Read More about Optimisation of substrate angles for multi-material and multi-functional inkjet printing.

A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks (2018)
Journal Article
Simonelli, M., Aboulkhair, N. T., Cohen, P., Murray, J. W., Clare, A. T., Tuck, C., & Hague, R. J. (in press). A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks. Materials Characterization, https://doi.org/10.1016/j.matchar.2018.05.039

In-situ alloying within laser powder-bed fusion, specifically Selective Laser Melting (SLM), has been investigated for the formulation of novel alloys from elemental powders to extend the benefits offered by these technologies. Inadequate preparation... Read More about A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks.

Electrochemically stimulating developments in bioelectronic medicine (2018)
Journal Article
Sanjuan-Alberte, P., Alexander, M. R., Hague, R. J., & Rawson, F. J. (2018). Electrochemically stimulating developments in bioelectronic medicine. Bioelectronic Medicine, 4(1), https://doi.org/10.1186/s42234-018-0001-z

Cellular homeostasis is in part controlled by biological generated electrical activity. By interfacing biology with electronic devices this electrical activity can be modulated to actuate cellular behaviour. There are current limitations in merging e... Read More about Electrochemically stimulating developments in bioelectronic medicine.

Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction (2018)
Journal Article
Hu, Q., Sun, X.-Z., Parmenter, C. D. J., Fay, M. W., Smith, E. F., Rance, G. A., He, Y., Zhang, F., Liu, Y., Irvine, D., Tuck, C., Hague, R., & Wildman, R. (2018). Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Scientific Reports, 8(1), Article 3512. https://doi.org/10.1038/s41598-018-21513-8

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Identification of novel ‘inks’ for 3D printing using high throughput screening: bioresorbable photocurable polymers for controlled drug delivery (2018)
Journal Article
Louzao, I., Koch, B., Taresco, V., Ruiz Cantu, L., Irvine, D. J., Roberts, C. J., Tuck, C. J., Alexander, C., Hague, R. J., Wildman, R. D., & Alexander, M. R. (in press). Identification of novel ‘inks’ for 3D printing using high throughput screening: bioresorbable photocurable polymers for controlled drug delivery. ACS Applied Materials and Interfaces, 10(8), https://doi.org/10.1021/acsami.7b15677

A robust discovery methodology is presented to identify novel biomaterials suitable for 3D printing. Currently the application of Additive Manufacturing is limited by the availability of functional inks, especially in the area of biomaterials-this me... Read More about Identification of novel ‘inks’ for 3D printing using high throughput screening: bioresorbable photocurable polymers for controlled drug delivery.

Effect of annealing on the microstructure and magnetic properties of soft magnetic Fe-Si produced via laser additive manufacturing (2018)
Journal Article
Garibaldi, M., Ashcroft, I., Lemke, J. N., Simonelli, M., & Hague, R. (2018). Effect of annealing on the microstructure and magnetic properties of soft magnetic Fe-Si produced via laser additive manufacturing. Scripta Materialia, 142, 121-125. https://doi.org/10.1016/j.scriptamat.2017.08.042

© 2017 Acta Materialia Inc. We investigate the effect of annealing on the properties of Fe-6.9wt% Si produced by Selective Laser Melting (SLM), a powder-bed additive manufacturing technology. Results show that annealing at 1150 °C for 1 h produces a... Read More about Effect of annealing on the microstructure and magnetic properties of soft magnetic Fe-Si produced via laser additive manufacturing.

Insights into the mechanical properties of several triplyperiodic minimal surface lattice structures made by polymeradditive manufacturing (2017)
Journal Article
Maskery, I., Sturm, L., Aremu, A., Panesar, A., Williams, C., Tuck, C., Wildman, R. D., Ashcroft, I., & Hague, R. J. (2018). Insights into the mechanical properties of several triplyperiodic minimal surface lattice structures made by polymeradditive manufacturing. Polymer, 152, 62-71. https://doi.org/10.1016/j.polymer.2017.11.049

Three-dimensional lattices have applications across a range of fields including structural lightweighting, impact absorption and biomedicine. In this work, lattices based on triply periodic minimal surfaces were produced by polymer additive manufactu... Read More about Insights into the mechanical properties of several triplyperiodic minimal surface lattice structures made by polymeradditive manufacturing.

Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction (2017)
Journal Article
Parmenter, C. D. J., Hu, Q., Sun, X. Z., Parmenter, C. D., Fay, M. W., Smith, E. F., Rance, G. A., He, Y., Zhang, F., Liu, Y., Irvine, D., Tuck, C., Hague, R., & Wildman, R. (2017). Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Scientific Reports, 7(1), Article 17150. https://doi.org/10.1038/s41598-017-17391-1

© 2017 The Author(s). The fabrication of complex three-dimensional gold-containing nanocomposite structures by simultaneous two-photon polymerisation and photoreduction is demonstrated. Increased salt delivers reduced feature sizes down to line width... Read More about Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction.

3-dimensional inkjet printing of macro structures from silver nanoparticles (2017)
Journal Article
Vaithilingam, J., Saleh, E., Körner, L., Wildman, R. D., Hague, R. J., Leach, R. K., & Tuck, C. J. (2018). 3-dimensional inkjet printing of macro structures from silver nanoparticles. Materials and Design, 139, https://doi.org/10.1016/j.matdes.2017.10.070

The adoption of additive manufacturing technology is gaining interest for processing precious metals. In this study, the capability of inkjet printing was explored to fabricate macroscopic parts from commercial silver nanoparticle ink (AgNPs). A besp... Read More about 3-dimensional inkjet printing of macro structures from silver nanoparticles.

3D inkjet printing of electronics using UV conversion (2017)
Journal Article
Saleh, E., Zhang, F., He, Y., Vaithilingam, J., Fernandez, J. L., Wildman, R. D., Ashcroft, I., Hague, R. J., Dickens, P., & Tuck, C. (2017). 3D inkjet printing of electronics using UV conversion. Advanced Materials Technologies, 2(10), Article 1700134. https://doi.org/10.1002/admt.201700134

The production of electronic circuits and devices is limited by current manufacturing methods that limit both the form and potentially the performance of these systems. Additive Manufacturing (AM) is a technology that has been shown to provide cross... Read More about 3D inkjet printing of electronics using UV conversion.

3D printing of tablets using inkjet with UV photoinitiation (2017)
Journal Article
Clark, E. A., Alexander, M. R., Irvine, D. J., Roberts, C. J., Wallace, M. J., Sharpe, S., Yoo, J., Hague, R. J., Tuck, C. J., & Wildman, R. D. (2017). 3D printing of tablets using inkjet with UV photoinitiation. International Journal of Pharmaceutics, 529(1-2), 523-530. https://doi.org/10.1016/j.ijpharm.2017.06.085

Additive manufacturing (AM) offers significant potential benefits in the field of drug delivery and pharmaceutical/medical device manufacture. Of AM processes, 3D inkjet printing enables precise deposition of a formulation, whilst offering the potent... Read More about 3D printing of tablets using inkjet with UV photoinitiation.

Multi-branched benzylidene ketone based photoinitiators for multiphoton fabrication (2017)
Journal Article
Zhang, F., Hu, Q., Castanon, A., He, Y., Liu, Y., Paul, B., Tuck, C., Hague, R. J., & Wildman, R. D. (2017). Multi-branched benzylidene ketone based photoinitiators for multiphoton fabrication. Additive Manufacturing, 16, 206-212. https://doi.org/10.1016/j.addma.2017.06.008

In this article, we report the synthesis of a series of multi-branched benzylidene (BI) ketone-based photo-initiators for two-photon polymerisation based 3D printing/additive manufacturing. Resins prepared by the addition of 1 wt.% of these initiator... Read More about Multi-branched benzylidene ketone based photoinitiators for multiphoton fabrication.

A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting (2017)
Journal Article
Aboulkhair, N., He, Y., Zhang, F., Saleh, E., Vaithilingam, J., Aboulkhair, N. T., Begines, B., Tuck, C. J., Hague, R. J., Ashcroft, I. A., & Wildman, R. D. (2017). A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting. Additive Manufacturing, 16, 153-161. https://doi.org/10.1016/j.addma.2017.06.001

© 2017 Support structures and materials are indispensable components in many Additive Manufacturing (AM) systems in order to fabricate complex 3D structures. For inkjet-based AM techniques (known as Material Jetting), there is a paucity of studies o... Read More about A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting.

Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM (2017)
Journal Article
Lemke, J., Simonelli, M., Garibaldi, M., Ashcroft, I., Hague, R., Vedani, M., Wildman, R. D., & Tuck, C. (2017). Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM. Journal of Alloys and Compounds, 722, 293-301. https://doi.org/10.1016/j.jallcom.2017.06.085

Innovative Additive Manufacturing (AM) technologies like Selective Laser Melting (SLM) could prove to be efficient for the processing of brittle silicon steel (Fe-Si) with high silicon content. This research elucidates the effects of heat-treatment o... Read More about Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM.

Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation (2017)
Journal Article
Baumers, M., Beltrametti, L., Gasparre, A., & Hague, R. (in press). Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation. International Journal of Production Research, 55(23), https://doi.org/10.1080/00207543.2017.1334978

Informing Additive Manufacturing (AM) technology adoption decisions, this paper investigates the relationship between build volume capacity utilisation and efficient technology operation in an inter-process comparison of the costs of manufacturing a... Read More about Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation.

Design framework for multifunctional additive manufacturing: coupled optimization strategy for structures with embedded functional systems (2017)
Journal Article
Panesar, A., Ashcroft, I., Brackett, D., Wildman, R. D., & Hague, R. (2017). Design framework for multifunctional additive manufacturing: coupled optimization strategy for structures with embedded functional systems. Additive Manufacturing, 16, https://doi.org/10.1016/j.addma.2017.05.009

The driver for this research is the development of multi-material additive manufacturing processes that provide the potential for multi-functional parts to be manufactured in a single operation. In order to exploit the potential benefits of this emer... Read More about Design framework for multifunctional additive manufacturing: coupled optimization strategy for structures with embedded functional systems.