Skip to main content

Research Repository

Advanced Search

Professor RICHARD LEACH's Outputs (204)

Noise evaluation of a point autofocus surface topography measuring instrument (2018)
Journal Article
Maculotti, G., Feng, X., Galetto, M., & Leach, R. K. (2018). Noise evaluation of a point autofocus surface topography measuring instrument. Measurement Science and Technology, 29(6), https://doi.org/10.1088/1361-6501/aab528

In this work, the measurement noise of a point autofocus surface topography measuring instrument is evaluated, as the first step towards establishing a route to traceability for this type of instrument. The evaluation is based on the determination of... Read More about Noise evaluation of a point autofocus surface topography measuring instrument.

Internal surface measurement of metal powder bed fusion parts (2018)
Journal Article
Thompson, A., Senin, N., Maskery, I., Körner, L., Lawes, S., & Leach, R. (2018). Internal surface measurement of metal powder bed fusion parts. Additive Manufacturing, 20, https://doi.org/10.1016/j.addma.2018.01.003

Recent advances in X-ray computed tomography (XCT) have allowed for measurement resolutions approaching the point where XCT can be used for measuring surface topography. These advances make XCT appealing for measuring hard-to-reach or internal surfac... Read More about Internal surface measurement of metal powder bed fusion parts.

Effects of defocus on the transfer function of coherence scanning interferometry (2017)
Journal Article
Su, R., Thomas, M., Leach, R., & Coupland, J. (2017). Effects of defocus on the transfer function of coherence scanning interferometry. Optics Letters, 43(1), https://doi.org/10.1364/OL.43.000082

Coherence scanning interferometry (CSI) offers three dimensional (3D) measurement of surface topography with high precision and accuracy. Defocus within the interferometric objective lens, however, is commonly present in CSI measurements, and reduces... Read More about Effects of defocus on the transfer function of coherence scanning interferometry.

Feature-based characterisation of signature topography in laser powder bed fusion of metals (2017)
Journal Article
Senin, N., Thompson, A., & Leach, R. K. (2018). Feature-based characterisation of signature topography in laser powder bed fusion of metals. Measurement Science and Technology, 29(4), Article 045009. https://doi.org/10.1088/1361-6501/aa9e19

The use of state-of-the-art areal topography measurement instrumentation allows for a high level of detail in the acquisition of topographic information at micrometric scales. The three-dimensional geometric models of surface topography obtained from... Read More about Feature-based characterisation of signature topography in laser powder bed fusion of metals.

Development of mathematically-defined surfaces (2017)
Presentation / Conference Contribution
Todhunter, L. D., Leach, R., Lawes, S., Harris, P., & Blateyron, F. (2017, October). Development of mathematically-defined surfaces. Presented at Postgraduate Institute Conference 2017

New software has been developed that enables the creation of areal surface topography representations. The goal of this software package is to utilise the mathematically-defined surface representations in the development of surface texture parameter... Read More about Development of mathematically-defined surfaces.

3-dimensional inkjet printing of macro structures from silver nanoparticles (2017)
Journal Article
Vaithilingam, J., Saleh, E., Körner, L., Wildman, R. D., Hague, R. J., Leach, R. K., & Tuck, C. J. (2018). 3-dimensional inkjet printing of macro structures from silver nanoparticles. Materials and Design, 139, https://doi.org/10.1016/j.matdes.2017.10.070

The adoption of additive manufacturing technology is gaining interest for processing precious metals. In this study, the capability of inkjet printing was explored to fabricate macroscopic parts from commercial silver nanoparticle ink (AgNPs). A besp... Read More about 3-dimensional inkjet printing of macro structures from silver nanoparticles.

Flexible decoupled camera and projector fringe projection system using inertial sensors (2017)
Journal Article
Stavroulakis, P., Sims-Waterhouse, D., Piano, S., & Leach, R. K. (in press). Flexible decoupled camera and projector fringe projection system using inertial sensors. Optical Engineering, 56(10), https://doi.org/10.1117/1.OE.56.10.104106

Measurement of objects with complex geometry and many self occlusions is increasingly important in many fields, including additive manufacturing. In a fringe projection system, the camera and the projector cannot move independently with respect to ea... Read More about Flexible decoupled camera and projector fringe projection system using inertial sensors.

True-color 3D surface metrology for additive manufacturing using interference microscopy (2017)
Presentation / Conference Contribution
DiSciacca, J., Gomez, C., Thompson, A., Lawes, S., Leach, R., Colonna de Lega, X., & de Groot, P. True-color 3D surface metrology for additive manufacturing using interference microscopy. Presented at Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing

Coherence scanning interferometry (CSI) is widely used for surface topography characterisation. With the ability to measure both rough surfaces with the high slopes and optical finishes, CSI has made contibutions in fields from industrial machining t... Read More about True-color 3D surface metrology for additive manufacturing using interference microscopy.

Optimisation of surface topography characterisation for metal additive manufacturing using coherence scanning interferometry (2017)
Presentation / Conference Contribution
Gómez, C. A., Su, R., Thompson, A., DiSciacca, J., Lawes, S., & Leach, R. K. Optimisation of surface topography characterisation for metal additive manufacturing using coherence scanning interferometry. Presented at Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing

The surface topography of metal additive manufactured (AM) parts can be challenging to measure due to the presence of complex features, such as high slopes, step like recesses and protuberances, and local variations in reflectance. Recent innovations... Read More about Optimisation of surface topography characterisation for metal additive manufacturing using coherence scanning interferometry.

Feature-based characterisation of laser powder bed fusion surfaces (2017)
Presentation / Conference Contribution
Senin, N., Thompson, A., & Leach, R. K. Feature-based characterisation of laser powder bed fusion surfaces. Presented at Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing

A novel algorithmic pipeline for the automated identification and dimensional/geometric characterisation of topographic formations of interest (surface features) is proposed, specifically aimed at the investigation of signature features left by laser... Read More about Feature-based characterisation of laser powder bed fusion surfaces.

Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing (2017)
Presentation / Conference Contribution
Xu, Z., Hyde, C. J., Thompson, A., Leach, R. K., Maskery, I., Tuck, C., & Clare, A. T. Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing. Presented at Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing

The mechanical performance of additively manufactured (AM) components remains an issue, limiting the implementation of AM technologies. In this work, a new method is presented, to examine the evolution of defects in an Inconel 718 two-bar test specim... Read More about Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing.

Design and analysis of strut-based lattice structures for vibration isolation (2017)
Journal Article
Syam, W. P., Jianwei, W., Zhao, B., Maskery, I., Elmadih, W., & Leach, R. (2018). Design and analysis of strut-based lattice structures for vibration isolation. Precision Engineering, 51, 494-506. https://doi.org/10.1016/j.precisioneng.2017.09.010

This paper presents the design, analysis and experimental verification of strut-based lattice structures to enhance the mechanical vibration isolation properties of a machine frame, whilst also conserving its structural integrity. In addition, design... Read More about Design and analysis of strut-based lattice structures for vibration isolation.

Characterisation of the topography of metal additive surface features with different measurement technologies (2017)
Journal Article
Senin, N., Thompson, A., & Leach, R. K. (2017). Characterisation of the topography of metal additive surface features with different measurement technologies. Measurement Science and Technology, 28(9), Article 095003. https://doi.org/10.1088/1361-6501/aa7ce2

© 2017 IOP Publishing Ltd. The challenges of measuring the surface topography of metallic surfaces produced by additive manufacturing are investigated. The differences between measurements made using various optical and non-optical technologies, incl... Read More about Characterisation of the topography of metal additive surface features with different measurement technologies.

The application of composite through-thickness assessment to additively manufactured structures (2017)
Presentation / Conference Contribution
Bitar, I., Aboulkhair, N., & Leach, R. (2017, August). The application of composite through-thickness assessment to additively manufactured structures. Presented at 28th Annual International Solid Freeform Fabrication Symposium

This study looks into the applicability of through-thickness assessment to additive manufacturing (AM) carbon-fibre reinforced polymers (CFRPs). The study utilised a material extrusion printer that uses fused filament fabrication and composite filame... Read More about The application of composite through-thickness assessment to additively manufactured structures.

Staged thermomechanical testing of nickel superalloys produced by selective laser melting (2017)
Journal Article
Xu, Z., Hyde, C. J., Thompson, A., Leach, R. K., Maskery, I., Tuck, C., & Clare, A. T. (2017). Staged thermomechanical testing of nickel superalloys produced by selective laser melting. Materials and Design, 133, 520-527. https://doi.org/10.1016/j.matdes.2017.08.009

The creep performance of additively manufactured components remains an issue before additive manufacturing can be put fully implemented. In this study, Inconel 718 two-bar specimens are produced by selective laser melting and subjected to a ‘staged’... Read More about Staged thermomechanical testing of nickel superalloys produced by selective laser melting.