Professor RICHARD HAGUE's Outputs (107)

Additive manufacturing processes for metals (2023)
Book Chapter
Aboulkhair, N. T., Bosio, F., Gilani, N., Phutela, C., Hague, R. J., & Tuck, C. J. (2023). Additive manufacturing processes for metals. In Quality Analysis of Additively Manufactured Metals: Simulation Approaches, Processes, and Microstructure Properties (201-258). Elsevier. https://doi.org/10.1016/b978-0-323-88664-2.00016-6

Additive manufacturing (AM) processes are a family of net-shaped manufacturing systems that are widely being used and adopted for their distinctive characteristics. Recently, AM processes have positioned themselves to be worthy of playing a role in r... Read More about Additive manufacturing processes for metals.

Innate immune cell instruction using micron-scale 3D objects of varied architecture and polymer chemistry: The ChemoArchiChip (2023)
Journal Article
Vassey, M., Ma, L., Kämmerling, L., Mbadugha, C., Trindade, G. F., Figueredo, G. P., Pappalardo, F., Hutchinson, J., Markus, R., Rajani, S., Hu, Q., Winkler, D. A., Irvine, D. J., Hague, R., Ghaemmaghami, A. M., Wildman, R., & Alexander, M. R. (2023). Innate immune cell instruction using micron-scale 3D objects of varied architecture and polymer chemistry: The ChemoArchiChip. Matter, 6(3), 887-906. https://doi.org/10.1016/j.matt.2023.01.002

To design effective immunomodulatory implants, innate immune cell interactions at the surface of biomaterials need to be controlled and understood. The architectural design freedom of two-photon polymerization is used to produce arrays of surface-mou... Read More about Innate immune cell instruction using micron-scale 3D objects of varied architecture and polymer chemistry: The ChemoArchiChip.

Strategies for Integrating Metal Nanoparticles with Two-Photon Polymerization Process: Toward High Resolution Functional Additive Manufacturing (2023)
Journal Article
Im, J., Liu, Y., Hu, Q., Trindade, G. F., Parmenter, C., Fay, M., He, Y., Irvine, D. J., Tuck, C., Wildman, R. D., Hague, R., & Turyanska, L. (2023). Strategies for Integrating Metal Nanoparticles with Two-Photon Polymerization Process: Toward High Resolution Functional Additive Manufacturing. Advanced Functional Materials, 33(39), Article 2211920. https://doi.org/10.1002/adfm.202211920

This study reports the successful fabrication of complex 3D metal nanoparticle–polymer nanocomposites using two-photon polymerization (2PP). Three complementary strategies are detailed: in situ formation of metal nanoparticles (MeNPs) through a singl... Read More about Strategies for Integrating Metal Nanoparticles with Two-Photon Polymerization Process: Toward High Resolution Functional Additive Manufacturing.

Photosensitisation of inkjet printed graphene with stable all-inorganic perovskite nanocrystals (2022)
Journal Article
Austin, J. S., Cottam, N. D., Zhang, C., Wang, F., Gosling, J. H., Nelson-Dummet, O., James, T. S., Beton, P. H., Trindade, G. F., Zhou, Y., Tuck, C. J., Hague, R., Makarovsky, O., & Turyanska, L. (2023). Photosensitisation of inkjet printed graphene with stable all-inorganic perovskite nanocrystals. Nanoscale, 15(5), 2134–2142. https://doi.org/10.1039/D2NR06429D

All-inorganic perovskite nanocrystals (NCs) with enhanced environmental stability are of particular interest for optoelectronic applications. Here we report on the formulation of CsPbX3 (X is Br or I) inks for inkjet deposition and utilise these NCs... Read More about Photosensitisation of inkjet printed graphene with stable all-inorganic perovskite nanocrystals.

Exploiting Generative Design for Multi-Material Inkjet 3D Printed Cell Instructive, Bacterial Biofilm Resistant Composites (2022)
Preprint / Working Paper
he, Y., Begines, B., Trindade, G., Abdi, M., dubern, J.-F., Prina, E., Hook, A., Choong, G., Ledesma, J., Tuck, C., R. A. J. Rose, F., Hague, R., Roberts, C., De Focatiis, D., Ashcroft, I., Williams, P., Irvine, D., alexander, M., & Wildman, R. Exploiting Generative Design for Multi-Material Inkjet 3D Printed Cell Instructive, Bacterial Biofilm Resistant Composites

As our understanding of disease grows, it is becoming established that treatment needs to be personalized and targeted to the needs of the individual. In this paper we show that multi-material inkjet-based 3D printing, when backed with generative des... Read More about Exploiting Generative Design for Multi-Material Inkjet 3D Printed Cell Instructive, Bacterial Biofilm Resistant Composites.

Printing biohybrid materials for bioelectronic cardio-3D-cellular constructs (2022)
Journal Article
Sanjuan-Alberte, P., Whitehead, C., Jones, J. N., Silva, J. C., Carter, N., Kellaway, S., Hague, R. J., Cabral, J. M., Ferreira, F. C., White, L. J., & Rawson, F. J. (2022). Printing biohybrid materials for bioelectronic cardio-3D-cellular constructs. iScience, 25(7), Article 104552. https://doi.org/10.1016/j.isci.2022.104552

Conductive hydrogels are emerging as promising materials for bioelectronic applications as they minimize the mismatch between biological and electronic systems. We propose a strategy to bioprint biohybrid conductive bioinks based on decellularized ex... Read More about Printing biohybrid materials for bioelectronic cardio-3D-cellular constructs.

Functionalized Gold Nanoparticles with a Cohesion Enhancer for Robust Flexible Electrodes (2022)
Journal Article
Im, J., Trindade, G. F., Quach, T. T., Sohaib, A., Wang, F., Austin, J., Turyanska, L., Roberts, C. J., Wildman, R., Hague, R., & Tuck, C. (2022). Functionalized Gold Nanoparticles with a Cohesion Enhancer for Robust Flexible Electrodes. ACS Applied Nano Materials, 5(5), 6708-6716. https://doi.org/10.1021/acsanm.2c00742

The development of conductive inks is required to enable additive manufacturing of electronic components and devices. A gold nanoparticle (AuNP) ink is of particular interest due to its high electrical conductivity, chemical stability, and biocompati... Read More about Functionalized Gold Nanoparticles with a Cohesion Enhancer for Robust Flexible Electrodes.

From impact to solidification in drop-on-demand metal additive manufacturing using MetalJet (2022)
Journal Article
Gilani, N., Aboulkhair, N. T., Simonelli, M., East, M., Ashcroft, I. A., & Hague, R. J. (2022). From impact to solidification in drop-on-demand metal additive manufacturing using MetalJet. Additive Manufacturing, 55, Article 102827. https://doi.org/10.1016/j.addma.2022.102827

Drop-on-demand metal jetting is a promising additive manufacturing (AM) technology that is gaining interest due to its capability to directly print complex single and multi-material components at high resolutions. It also has key advantages over othe... Read More about From impact to solidification in drop-on-demand metal additive manufacturing using MetalJet.

3D reactive inkjet printing of bisphenol A-polycarbonate (2022)
Journal Article
Qian, Q., Kamps, J. H., Price, B., Gu, H., Wildman, R., Hague, R., Begines, B., & Tuck, C. (2022). 3D reactive inkjet printing of bisphenol A-polycarbonate. Additive Manufacturing, 54, Article 102745. https://doi.org/10.1016/j.addma.2022.102745

Additive Manufacturing (AM) techniques have gained extensive attention recently as they are able to directly produce 3D parts utilising a layer-by-layer manner. Inkjet printing is one such technique which can produce micron-scale features but is gene... Read More about 3D reactive inkjet printing of bisphenol A-polycarbonate.

Chemical recovery of spent copper powder in laser powder bed fusion (2022)
Journal Article
Speidel, A., Gargalis, L., Ye, J., Matthews, M. J., Spierings, A., Hague, R., Clare, A. T., & Murray, J. W. (2022). Chemical recovery of spent copper powder in laser powder bed fusion. Additive Manufacturing, 52, Article 102711. https://doi.org/10.1016/j.addma.2022.102711

In laser powder bed fusion (LPBF), recovered unfused powder from the powder bed often degrades upon sequential processing through mechanisms like thermal oxidation and particle satelliting from ejected weld spatters and particle-laser interactions. G... Read More about Chemical recovery of spent copper powder in laser powder bed fusion.

Correction to “Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers” (2022)
Journal Article
Ruiz-Cantu, L., Trindade, G. F., Taresco, V., Zhou, Z., He, Y., Burroughs, L., Clark, E. A., Rose, F. R. A. J., Tuck, C., Hague, R., Roberts, C. J., Alexander, M., Irvine, D. J., & Wildman, R. D. (2022). Correction to “Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers”. ACS Applied Materials and Interfaces, 14(6), 8654. https://doi.org/10.1021/acsami.2c00035

The chemical structure of the drug trandolapril has been corrected in Figure 4c. The conclusions of the work have not been affected by this correction. (Figure present).

Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices (2021)
Journal Article
He, Y., Luckett, J., Begines, B., Dubern, J. F., Hook, A. L., Prina, E., Rose, F. R., Tuck, C. J., Hague, R. J., Irvine, D. J., Williams, P., Alexander, M. R., & Wildman, R. D. (2022). Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices. Biomaterials, 281, Article 121350. https://doi.org/10.1016/j.biomaterials.2021.121350

Chronic infection as a result of bacterial biofilm formation on implanted medical devices is a major global healthcare problem requiring new biocompatible, biofilm-resistant materials. Here we demonstrate how bespoke devices can be manufactured throu... Read More about Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices.

The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing (2021)
Journal Article
Hu, Q., Rance, G. A., Trindade, G. F., Pervan, D., Jiang, L., Foerster, A., Turyanska, L., Tuck, C., Irvine, D. J., Hague, R., & Wildman, R. D. (2022). The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing. Additive Manufacturing, 51, Article 102575. https://doi.org/10.1016/j.addma.2021.102575

Two-photon polymerisation (2PP) based additive manufacturing has emerged as a powerful technology to fabricate complex three-dimensional micro- and nanoscale architectures. However, a comprehensive understanding of the effect of printing parameters o... Read More about The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing.

FLatt Pack: A research-focussed lattice design program (2021)
Journal Article
Maskery, I., Parry, L. A., Padrão, D., Hague, R., & Ashcroft, I. A. (2022). FLatt Pack: A research-focussed lattice design program. Additive Manufacturing, 49, Article 102510. https://doi.org/10.1016/j.addma.2021.102510

Lattice structures are an important aspect of design for additive manufacturing (DfAM). They enable significant component light-weighting and the tailoring of a wide range of physical responses; mechanical, thermal, acoustic, etc. In turn, lattice de... Read More about FLatt Pack: A research-focussed lattice design program.

Impedimetric Characterization of Bipolar Nanoelectrodes with Cancer Cells (2021)
Journal Article
Robinson, A. J., Jain, A., Rahman, R., Abayzeed, S., Hague, R. J., & Rawson, F. J. (2021). Impedimetric Characterization of Bipolar Nanoelectrodes with Cancer Cells. ACS Omega, 6(44), 29495-29505. https://doi.org/10.1021/acsomega.1c03547

Merging of electronics with biology, defined as bioelectronics, at the nanoscale holds considerable promise for sensing and modulating cellular behavior. Advancing our understanding of nanobioelectronics will facilitate development and enable applica... Read More about Impedimetric Characterization of Bipolar Nanoelectrodes with Cancer Cells.

Insights into drop-on-demand metal additive manufacturing through an integrated experimental and computational study (2021)
Journal Article
Gilani, N., Aboulkhair, N. T., Simonelli, M., East, M., Ashcroft, I., & Hague, R. J. (2021). Insights into drop-on-demand metal additive manufacturing through an integrated experimental and computational study. Additive Manufacturing, 48(Part B), Article 102402. https://doi.org/10.1016/j.addma.2021.102402

Drop-on-demand metal jetting is a recent additive manufacturing technology opening new opportunities for the fabrication of complex single and multi-metal components. MetalJet, the Océ developed technique used in this study, has the capacity to produ... Read More about Insights into drop-on-demand metal additive manufacturing through an integrated experimental and computational study.

The interaction of volatile metal coatings during the laser powder bed fusion of copper (2021)
Journal Article
Speidel, A., Wadge, M. D., Gargalis, L., Cooper, T. P., Reynolds, W., Grant, D., Hague, R., Clare, A. T., & Murray, J. W. (2022). The interaction of volatile metal coatings during the laser powder bed fusion of copper. Journal of Materials Processing Technology, 299, Article 117332. https://doi.org/10.1016/j.jmatprotec.2021.117332

The high optical reflectance of Cu at near-infrared wavelengths narrows the process window to fabricate Cu parts by laser powder bed fusion (LPBF). Coating powders with optically absorptive materials has been investigated to improve processability an... Read More about The interaction of volatile metal coatings during the laser powder bed fusion of copper.

Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers (2021)
Journal Article
Ruiz-Cantu, L., Trindade, G. F., Taresco, V., Zhou, Z., He, Y., Burroughs, L., Clark, E. A., Rose, F. R., Tuck, C., Hague, R., Roberts, C. J., Alexander, M., Irvine, D. J., & Wildman, R. D. (2021). Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers. ACS Applied Materials and Interfaces, 13(33), 38969-38978. https://doi.org/10.1021/acsami.1c07850

Controlling the microstructure of materials by means of phase separation is a versatile tool for optimizing material properties. Phase separation has been exploited to fabricate intricate microstructures in many fields including cell biology, tissue... Read More about Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers.

Process-structure-property relationships in laser powder bed fusion of permanent magnetic Nd-Fe-B (2021)
Journal Article
Wu, J., Aboulkhair, N. T., Degano, M., Ashcroft, I., & Hague, R. J. (2021). Process-structure-property relationships in laser powder bed fusion of permanent magnetic Nd-Fe-B. Materials and Design, 209, Article 109992. https://doi.org/10.1016/j.matdes.2021.109992

Laser powder-bed fusion (L-PBF), as an additive manufacturing (AM) technique, has demonstrated excellent capabilities in achieving degrees of freedom in manufacturing that are otherwise unattainable. The potential of combining Nd-Fe-B as a permanent... Read More about Process-structure-property relationships in laser powder bed fusion of permanent magnetic Nd-Fe-B.

Modelling the influence of UV curing strategies for optimisation of inkjet based 3D printing (2021)
Journal Article
Zhao, P., He, Y., Trindade, G. F., Baumers, M., Irvine, D., Hague, R., Ashcroft, I., & Wildman Conceptualisation, R. (2021). Modelling the influence of UV curing strategies for optimisation of inkjet based 3D printing. Materials and Design, 208, Article 109889. https://doi.org/10.1016/j.matdes.2021.109889

A predictive model is developed to assist in the design and manufacture of structures by inkjet based 3D printing (IJ3DP)/additive manufacturing. IJ3DP often exploits photopolymerisation to rapidly convert a photoreactive liquid ink into a solid prod... Read More about Modelling the influence of UV curing strategies for optimisation of inkjet based 3D printing.