Skip to main content

Research Repository

Advanced Search

All Outputs (196)

Photogrammetric coordinate metrology (2018)
Presentation / Conference
Sims-Waterhouse, D., Piano, S., & Leach, R. (2018, June). Photogrammetric coordinate metrology. Paper presented at euspen 18th International Conference & Exhibition

Effects of vibration on fringe projection systems (2018)
Presentation / Conference
Bointon, P., Todhunter, L., Stavroulakis, P., Clare, A., & Leach, R. (2018, June). Effects of vibration on fringe projection systems. Paper presented at euspen 18th International Conference & Exhibition

Development of an X-ray simulator: from STTL file to grey scale image (2018)
Conference Proceeding
Korner, L., Leach, R., & Lawes, S. (2018). Development of an X-ray simulator: from STTL file to grey scale image. In Proceedings of the 18th International conference of the European Society for Precision Engineering and Nanotechnology (euspen), 503-504

Fast and cost-effective in-process defect inspection for printed electronics based on coherent optical processing (2018)
Journal Article
Feng, X., Su, R., Happonen, T., Liu, J., & Leach, R. (2018). Fast and cost-effective in-process defect inspection for printed electronics based on coherent optical processing. Optics Express, 26(11), https://doi.org/10.1364/OE.26.013927

This paper presents an all-optical difference engine (AODE) sensor for detecting the defects in printed electronics produced with roll-to-roll processes. The sensor is based on the principle of coherent optical subtraction and is able to achieve high... Read More about Fast and cost-effective in-process defect inspection for printed electronics based on coherent optical processing.

A self-calibration rotational stitching method for precision measurement of revolving surfaces (2018)
Journal Article
Liu, M., Cheung, C., Feng, X., Wang, C., & Leach, R. (in press). A self-calibration rotational stitching method for precision measurement of revolving surfaces. Precision Engineering, https://doi.org/10.1016/j.precisioneng.2018.05.002

When measuring revolving objects, it is often desired to obtain not only the geometrical form of the workpiece, but also the topography of the surface, as they both affect the performance of the part. However, holistic measurement of the entire three... Read More about A self-calibration rotational stitching method for precision measurement of revolving surfaces.

Fusion of photogrammetry and coherence scanning interferometry data for all-optical coordinate measurement (2018)
Journal Article
Leach, R., Sims-Waterhouse, D., Medeossi, F., Savio, E., Carmignato, S., & Su, R. (2018). Fusion of photogrammetry and coherence scanning interferometry data for all-optical coordinate measurement. CIRP Annals - Manufacturing Technology, 67(1), 599-602. https://doi.org/10.1016/j.cirp.2018.04.043

Multisensor data fusion is an approach to enlarge the potential applicability of measuring techniques and improve accuracy, taking advantage of the strengths of different techniques. In this work, we present a new method for the fusion of photogramme... Read More about Fusion of photogrammetry and coherence scanning interferometry data for all-optical coordinate measurement.

Hierarchical-information-based characterization of multiscale structured surfaces (2018)
Journal Article
Cheung, C. F., Liu, M., Leach, R., Feng, X., & Zhao, C. (2018). Hierarchical-information-based characterization of multiscale structured surfaces. CIRP Annals - Manufacturing Technology, 67(1), 539-542. https://doi.org/10.1016/j.cirp.2018.04.002

© 2018 This paper presents a hierarchical-information-based characterization method for multiscale structured surfaces. The method makes use of a priori information of the multiscale surface and a hierarchical segmentation–registration (HSR) algorith... Read More about Hierarchical-information-based characterization of multiscale structured surfaces.

Effects of magnification and sampling resolution in X-ray computed tomography for the measurement of additively manufactured metal surfaces (2018)
Journal Article
Thompson, A., Senin, N., Maskery, I., & Leach, R. (2018). Effects of magnification and sampling resolution in X-ray computed tomography for the measurement of additively manufactured metal surfaces. Precision Engineering, 53, https://doi.org/10.1016/j.precisioneng.2018.02.014

Recent studies have shown that X-ray computed tomography (XCT) can be used to measure the surface topography of additively manufactured parts. However, further research is necessary to fully understand XCT measurement performance. Here, we show how m... Read More about Effects of magnification and sampling resolution in X-ray computed tomography for the measurement of additively manufactured metal surfaces.

Lateral scale calibration for focus variation microscopy (2018)
Journal Article
Alburayt, A., Syam, W. P., & Leach, R. (in press). Lateral scale calibration for focus variation microscopy. Measurement Science and Technology, 29(6), https://doi.org/10.1088/1361-6501/aab949

Areal surface texture measuring instruments can be calibrated by determining a set of metrological characteristics currently in the final stages of standardisation. In this paper, amplification, linearity and perpendicularity characteristics have bee... Read More about Lateral scale calibration for focus variation microscopy.

Noise evaluation of a point autofocus surface topography measuring instrument (2018)
Journal Article
Maculotti, G., Feng, X., Galetto, M., & Leach, R. K. (2018). Noise evaluation of a point autofocus surface topography measuring instrument. Measurement Science and Technology, 29(6), https://doi.org/10.1088/1361-6501/aab528

In this work, the measurement noise of a point autofocus surface topography measuring instrument is evaluated, as the first step towards establishing a route to traceability for this type of instrument. The evaluation is based on the determination of... Read More about Noise evaluation of a point autofocus surface topography measuring instrument.

Internal surface measurement of metal powder bed fusion parts (2018)
Journal Article
Thompson, A., Senin, N., Maskery, I., Körner, L., Lawes, S., & Leach, R. (2018). Internal surface measurement of metal powder bed fusion parts. Additive Manufacturing, 20, https://doi.org/10.1016/j.addma.2018.01.003

Recent advances in X-ray computed tomography (XCT) have allowed for measurement resolutions approaching the point where XCT can be used for measuring surface topography. These advances make XCT appealing for measuring hard-to-reach or internal surfac... Read More about Internal surface measurement of metal powder bed fusion parts.

Effects of defocus on the transfer function of coherence scanning interferometry (2017)
Journal Article
Su, R., Thomas, M., Leach, R., & Coupland, J. (2017). Effects of defocus on the transfer function of coherence scanning interferometry. Optics Letters, 43(1), https://doi.org/10.1364/OL.43.000082

Coherence scanning interferometry (CSI) offers three dimensional (3D) measurement of surface topography with high precision and accuracy. Defocus within the interferometric objective lens, however, is commonly present in CSI measurements, and reduces... Read More about Effects of defocus on the transfer function of coherence scanning interferometry.

Feature-based characterisation of signature topography in laser powder bed fusion of metals (2017)
Journal Article
Senin, N., Thompson, A., & Leach, R. K. (2018). Feature-based characterisation of signature topography in laser powder bed fusion of metals. Measurement Science and Technology, 29(4), Article 045009. https://doi.org/10.1088/1361-6501/aa9e19

The use of state-of-the-art areal topography measurement instrumentation allows for a high level of detail in the acquisition of topographic information at micrometric scales. The three-dimensional geometric models of surface topography obtained from... Read More about Feature-based characterisation of signature topography in laser powder bed fusion of metals.

Development of mathematically-defined surfaces (2017)
Conference Proceeding
Todhunter, L. D., Leach, R., Lawes, S., Harris, P., & Blateyron, F. (2017). Development of mathematically-defined surfaces.

New software has been developed that enables the creation of areal surface topography representations. The goal of this software package is to utilise the mathematically-defined surface representations in the development of surface texture parameter... Read More about Development of mathematically-defined surfaces.

3-dimensional inkjet printing of macro structures from silver nanoparticles (2017)
Journal Article
Vaithilingam, J., Saleh, E., Körner, L., Wildman, R. D., Hague, R. J., Leach, R. K., & Tuck, C. J. (2018). 3-dimensional inkjet printing of macro structures from silver nanoparticles. Materials and Design, 139, https://doi.org/10.1016/j.matdes.2017.10.070

The adoption of additive manufacturing technology is gaining interest for processing precious metals. In this study, the capability of inkjet printing was explored to fabricate macroscopic parts from commercial silver nanoparticle ink (AgNPs). A besp... Read More about 3-dimensional inkjet printing of macro structures from silver nanoparticles.