All Outputs (5348)

Virtual, augmented, mixed, and extended reality interventions in healthcare: a systematic review of health economic evaluations and cost-effectiveness (2023)
Journal Article
Gómez Bergin, A. D., & Craven, M. P. (2023). Virtual, augmented, mixed, and extended reality interventions in healthcare: a systematic review of health economic evaluations and cost-effectiveness. BMC Digital Health, 1(53), https://doi.org/10.1186/s44247-023-00054-9

Introduction Health economic evaluations are required to best understand the value of interventions to the health economy. As extended reality technologies (an umbrella term including virtual, augmented, and mixed reality) become cheaper and more... Read More about Virtual, augmented, mixed, and extended reality interventions in healthcare: a systematic review of health economic evaluations and cost-effectiveness.

Impacts of multi-pollutants on sulfonamide antibiotic removal from water matrices using layered double hydroxide sorbents (2023)
Journal Article
Johnston, A., Lester, E., Williams, O., & Gomes, R. L. (2024). Impacts of multi-pollutants on sulfonamide antibiotic removal from water matrices using layered double hydroxide sorbents. Environmental Technology and Innovation, 33, Article 103490. https://doi.org/10.1016/j.eti.2023.103490

Remediation of sulfamethoxazole (SMX) present in the aqueous environment requires the development of new advanced wastewater treatment technologies, crucial to reduce the toxicity of such pollutants to the environment, supporting urban water reuse. C... Read More about Impacts of multi-pollutants on sulfonamide antibiotic removal from water matrices using layered double hydroxide sorbents.

Development of an open-source carbon footprint calculator of the UK craft brewing value chain (2023)
Journal Article
Bowler, A. L., Rodgers, S., Meng, F., McKechnie, J., Cook, D. J., & Watson, N. J. (2024). Development of an open-source carbon footprint calculator of the UK craft brewing value chain. Journal of Cleaner Production, 435, Article 140181. https://doi.org/10.1016/j.jclepro.2023.140181

Craft breweries may fall behind large brewing companies in reducing the carbon footprints of their value chains due to limited resources, financial constraints, and a lack of technical knowledge to fully understand their emissions. However, by increa... Read More about Development of an open-source carbon footprint calculator of the UK craft brewing value chain.

Current-constraint Speed Regulation for PMSM Based on Port-controlled Hamiltonian Realization and Deep Deterministic Policy Gradient (2023)
Journal Article
Wang, M., Liu, Y., Wang, Q., & Wheeler, P. (2024). Current-constraint Speed Regulation for PMSM Based on Port-controlled Hamiltonian Realization and Deep Deterministic Policy Gradient. IEICE Electronics Express, 21(2), Article 20230516. https://doi.org/10.1587/elex.20.20230516

To ensure overcurrent protection, fast dynamic performance and good robustness, a novel speed regulation controller is proposed. The interconnection and damping assignment passivity-based control (IDA-PBC) of Port-controlled Hamiltonian (PCH) systems... Read More about Current-constraint Speed Regulation for PMSM Based on Port-controlled Hamiltonian Realization and Deep Deterministic Policy Gradient.

Guidelines for the implementation of SMARTI: Sustainable Multifunctional Automated Resilient Transport Infrastructure (2023)
Journal Article
Presti, D. L., Hautiere, N., Hornych, P., Nkwanga, H., Mignini, C., McLoughlin, A., …Doherty, P. (2023). Guidelines for the implementation of SMARTI: Sustainable Multifunctional Automated Resilient Transport Infrastructure. Transportation Research Procedia, 72, 2952-2959. https://doi.org/10.1016/j.trpro.2023.11.842

The World's transport infrastructures (TI) network is facing fast changes due to population growth, mobility, business trades and globalization. More challenges are coming from unforeseen natural and human-induced hazards, including climate change's... Read More about Guidelines for the implementation of SMARTI: Sustainable Multifunctional Automated Resilient Transport Infrastructure.

Performance study of a thermochemical energy storage reactor embedded with a microchannel tube heat exchanger for water heating (2023)
Journal Article
Zhang, Y., Hu, M., Chen, Z., Su, Y., & Riffat, S. (2024). Performance study of a thermochemical energy storage reactor embedded with a microchannel tube heat exchanger for water heating. Journal of Energy Storage, 78, Article 110043. https://doi.org/10.1016/j.est.2023.110043

Thermochemical energy storage (TCES) provides a promising solution to addressing the mismatch between solar thermal production and heating demands in buildings. However, existing air-based open TCES systems face practical challenges in integrating wi... Read More about Performance study of a thermochemical energy storage reactor embedded with a microchannel tube heat exchanger for water heating.

mm-Wave Low Insertion Loss SIW Phase Shifter Based on Liquid Metal Technology (2023)
Journal Article
Alkaraki, S., Qu, Z., & Kelly, J. R. (2024). mm-Wave Low Insertion Loss SIW Phase Shifter Based on Liquid Metal Technology. IEEE Microwave and Wireless Technology Letters, 34(2), 155-158. https://doi.org/10.1109/LMWT.2023.3339200

This letter presents the proof of concept of first liquid metal (LM)-based millimeter-wave (mm-wave) phase shifter that have very low insertion loss (IL) performance. The proposed phase shifter has a phase shift up to 360° with a phase resolution of... Read More about mm-Wave Low Insertion Loss SIW Phase Shifter Based on Liquid Metal Technology.

Solutions for recycling emerging wind turbine blade waste in China are not yet effective (2023)
Journal Article
Yang, J., Meng, F., Zhang, L., McKechnie, J., Chang, Y., Ma, B., …Cullen, J. M. (2023). Solutions for recycling emerging wind turbine blade waste in China are not yet effective. Communications Earth & Environment, 4(1), Article 466. https://doi.org/10.1038/s43247-023-01104-w

Wind power supply chains are evolving as markets expand to reach climate goals. With the largest installed wind power capacity globally, China must deal with increasing composite turbine waste and anticipate its associated costs. Here we predict the... Read More about Solutions for recycling emerging wind turbine blade waste in China are not yet effective.

Kinetics and toxicological potential of heavy metal leaching from asphalt pavements (2023)
Journal Article
Zou, F., Leng, Z., Tan, Z., Li, D., Han, M., Lu, G., & Sreeram, A. (2024). Kinetics and toxicological potential of heavy metal leaching from asphalt pavements. Science of the Total Environment, 912, Article 169193. https://doi.org/10.1016/j.scitotenv.2023.169193

The leaching of heavy metals from asphalt pavement has attracted increasing attention due to its associated environmental risks. Comprehending the leaching process is crucial for ensuring the safe utilization of asphalt pavement. This study investiga... Read More about Kinetics and toxicological potential of heavy metal leaching from asphalt pavements.

Manufacturable Edgewise Winding Solutions Considering Parallel Slot and Parallel Tooth Stator Structures (2023)
Conference Proceeding
George, L., Walker, A., Zhang, F., Vakil, G., & Gerada, C. (2023). Manufacturable Edgewise Winding Solutions Considering Parallel Slot and Parallel Tooth Stator Structures. . https://doi.org/10.1109/oncon60463.2023.10431188

Due to climate concerns, the push towards transportation electrification to deliver electric machines capable of high-power density performance is becoming increasingly critical. A key component of this is the structure and manufacture of the winding... Read More about Manufacturable Edgewise Winding Solutions Considering Parallel Slot and Parallel Tooth Stator Structures.

Modelling and experimental study of laser-assisted milling of fibre reinforced SiC/Ti-6Al-4V metal matrix composite (2023)
Journal Article
Mypati, O., Panzer, J., Robles-Linares, J. A., Zan, S., Liao, Z., & Axinte, D. (2024). Modelling and experimental study of laser-assisted milling of fibre reinforced SiC/Ti-6Al-4V metal matrix composite. Materials and Design, 237, Article 112552. https://doi.org/10.1016/j.matdes.2023.112552

Metal matrix composites (MMCs) offer unique advantageous mechanical properties by strengthening a ductile metal matrix with a ceramic reinforcement (e.g., Ti6Al-4 V/SiCf). However, their heterogeneous composition poses machining challenges including... Read More about Modelling and experimental study of laser-assisted milling of fibre reinforced SiC/Ti-6Al-4V metal matrix composite.

Analytical and Numerical Models for Wind and Seismic Design and Assessment of Mass Timber Diaphragms (2023)
Journal Article
Rodrigues, L. G., Barbosa, A. R., Sinha, A., Higgins, C., Breneman, S., Zimmerman, R. B., …Neves, L. C. (2023). Analytical and Numerical Models for Wind and Seismic Design and Assessment of Mass Timber Diaphragms. Journal of Structural Engineering, 150(2), https://doi.org/10.1061/JSENDH.STENG-12265

While the use of cross-laminated timber (CLT) panels for building construction has increased over the last several decades, current standards and existing literature provide limited information regarding the design of CLT diaphragms or the prediction... Read More about Analytical and Numerical Models for Wind and Seismic Design and Assessment of Mass Timber Diaphragms.

Enhancement of thermal and mechanical properties of microencapsulated phase change materials with graphene oxide (2023)
Journal Article
Hu, M., Wang, D., Kokogiannakis, G., Darkwa, J., Li, Y., Wang, L., …Su, W. (2024). Enhancement of thermal and mechanical properties of microencapsulated phase change materials with graphene oxide. Chemical Engineering Journal, 479, 147855. https://doi.org/10.1016/j.cej.2023.147855

The low thermal conductivity of microencapsulated phase change materials (MEPCMs) limits the latent heat charging and discharging rates for various applications. To overcome this limitation, we prepared MEPCM by co-surfactants of polyvinyl alcohol an... Read More about Enhancement of thermal and mechanical properties of microencapsulated phase change materials with graphene oxide.

A Fast and Accurate GaN Power Transistor Model and Its Application for Electric Vehicle (2023)
Journal Article
Li, K., & Sen, S. (2024). A Fast and Accurate GaN Power Transistor Model and Its Application for Electric Vehicle. IEEE Transactions on Vehicular Technology, 73(4), 4541-4553. https://doi.org/10.1109/tvt.2023.3340297

In order to overcome the challenge of balancing accuracy with simulation speed of power electronics converters for system-level simulation, the paper proposes a GaN power transistor model that can accurately and rapidly predict power losses, which is... Read More about A Fast and Accurate GaN Power Transistor Model and Its Application for Electric Vehicle.

Flexural and cracking behavior of corroded RC continuous beams strengthened with energized C-FRCM system (2023)
Journal Article
Feng, R., Tang, J., Liu, P., Wang, F., Zeng, J., & Zhu, J. (2024). Flexural and cracking behavior of corroded RC continuous beams strengthened with energized C-FRCM system. Structural Concrete, 25(1), 659-676. https://doi.org/10.1002/suco.202300397

This paper presents an experimental investigation into the flexural and cracking behavior of corroded reinforced concrete continuous beams with 11-month wet–dry cycles strengthened by anodic polarized carbon-fabric-reinforced cementitious matrix (C-F... Read More about Flexural and cracking behavior of corroded RC continuous beams strengthened with energized C-FRCM system.

In vitro immunomodulatory effect of solid versus porous phosphate-based glass microspheres using macrophages (2023)
Journal Article
Sheela, S., AlGhalban, F. M., Ahmed, I., & Abou Neel, E. A. (2023). In vitro immunomodulatory effect of solid versus porous phosphate-based glass microspheres using macrophages. Heliyon, 9(12), e23059. https://doi.org/10.1016/j.heliyon.2023.e23059

This study aimed to investigate the immunomodulatory effect of two different forms of phosphate-based glass microspheres (solid and porous), on human macrophages. Human THP-1 monocytes were converted to M0 macrophages after being treated with 100 ng/... Read More about In vitro immunomodulatory effect of solid versus porous phosphate-based glass microspheres using macrophages.

An inverse application of unit cells for extracting fibre properties from effective properties of composites (2023)
Journal Article
Zou, Z., & Li, S. (in press). An inverse application of unit cells for extracting fibre properties from effective properties of composites. Mathematics and Mechanics of Solids, https://doi.org/10.1177/10812865231212150

A semi-analytical solution is obtained in this paper for the micromechanical analysis of the square and hexagonal unit cells using complex potentials. It provides a means of numerical characterisation of unidirectionally fibre-reinforced composites f... Read More about An inverse application of unit cells for extracting fibre properties from effective properties of composites.

See your stories: Visualisation for Narrative Medicine (2023)
Journal Article
Ma, H., Yuan, X., Sun, X., Lawson, G., & Wang, Q. (2024). See your stories: Visualisation for Narrative Medicine. Health Data Science, 4, Article 0103. https://doi.org/10.34133/hds.0103

Importance: Narrative Medicine (NM), in which patient stories play a crucial role in their diagnosis and treatment, can potentially support a more holistic approach to patient care than traditional scientific ones. However, there are some challen... Read More about See your stories: Visualisation for Narrative Medicine.

Evaluation of E10 and NH3 co-fuelling in a modern spark ignition engine (2023)
Book Chapter
Ambalakatte, A., Geng, S., Cairns, A., La Rocca, A., Harrington, A., Hall, J., & Bassett, M. (2023). Evaluation of E10 and NH3 co-fuelling in a modern spark ignition engine. . Taylor & Francis

Ammonia (NH3) is emerging as a potential favoured fuel for longer range decarbonised heavy transport, particularly in the marine sector, predominantly due to highly favourable characteristics as an effective hydrogen carrier. This is despite generall... Read More about Evaluation of E10 and NH3 co-fuelling in a modern spark ignition engine.

The effect of nucleating agent on the multiphase change materials for energy storage in buildings (2023)
Journal Article
Sinaga, R., Darkwa, J., Worall, M., & Su, W. (2024). The effect of nucleating agent on the multiphase change materials for energy storage in buildings. Applied Thermal Engineering, 239, Article 122153. https://doi.org/10.1016/j.applthermaleng.2023.122153

Phase change materials (PCMs) have the potential to be used for widespread energy storage applications in buildings. However, available PCMs can only function at fixed phase transitional temperatures, restricting their seasonal applicability. To this... Read More about The effect of nucleating agent on the multiphase change materials for energy storage in buildings.