All Outputs (17)

A novel approach to design lesion-specific stents for minimum recoil (2016)
Journal Article

Stent geometries are obtained by topology optimization for minimized compliance under different stenosis levels and plaque material types. Three levels of stenosis by cross-sectional area, i.e., 30%, 40%, and 50% and three different plaque material p... Read More about A novel approach to design lesion-specific stents for minimum recoil.

Hierarchical remeshing strategies with mesh mapping for topology optimisation (2016)
Journal Article

This work investigates the use of hierarchical mesh decomposition strategies for topology optimisation using bi-directional evolutionary structural optimisation algorithm. The proposed method uses a dual mesh system that decouples the design variable... Read More about Hierarchical remeshing strategies with mesh mapping for topology optimisation.

A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing (2016)
Journal Article

Additive Manufacturing (AM) enables the production of geometrically complex parts that are difficult to manufacture by other means. However, conventional CAD systems are limited in the representation of such parts. This issue is exacerbated when latt... Read More about A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing.

A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale (2016)
Journal Article

Material properties such as hardness can be dependent on the size of the indentation load when that load is small, a phenomenon known as the indentation size effect (ISE). In this work an inverse finite element method (IFEM) is used to investigate th... Read More about A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale.

3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications (2016)
Journal Article

Inkjet printing of multiple materials is usually processed in multiple steps due to various jetting and curing/sintering conditions. In this paper we report on the development of all inkjet-printed UV-curable electromagnetic responsive inks in a sing... Read More about 3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications.

Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication (2016)
Journal Article

Three dimensional structures prepared from a gold-polymer composite formulation have been fabricated using multiphoton lithography. In this process, gold nanoparticles were simultaneously formed through photoreduction whilst polymerisation of two pos... Read More about Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication.

Development, printability and post-curing studies of formulations of materials resistant to microbial attachment for use in inkjet based 3D printing (2016)
Journal Article

Purpose: This paper aims to print 3D structures from polymers that resist bacterial attachment by reactive jetting of acrylate monomers. Design/methodology/approach: The first step towards printing was ink development. Inks were characterised to car... Read More about Development, printability and post-curing studies of formulations of materials resistant to microbial attachment for use in inkjet based 3D printing.

The UK National Quantum Technologies Hub in sensors and metrology (Keynote Paper) (2016)
Journal Article

The UK National Quantum Technology Hub in Sensors and Metrology is one of four flagship initiatives in the UK National of Quantum Technology Program. As part of a 20-year vision it translates laboratory demonstrations to deployable practical devices,... Read More about The UK National Quantum Technologies Hub in sensors and metrology (Keynote Paper).

A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing (2016)
Journal Article

A new type of photocrosslinkable polycaprolactone (PCL)-based ink that is suitable for three-dimensional (3D) inkjet printing has been developed. Photocrosslinkable PCL dimethylacrylate was synthesized and mixed with poly(ethylene glycol) diacrylate... Read More about A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing.

The thermo-mechanical degradation of ethylene vinyl acetate used as a solar panel adhesive and encapsulant (2016)
Journal Article

© 2016 The Authors. Published by Elsevier Ltd. The thermal ageing of an ethylene-vinyl acetate (EVA) polymer used as an adhesive and encapsulant in a photovoltaic module has been investigated. The EVA is used to bond the silicon solar cells to the fr... Read More about The thermo-mechanical degradation of ethylene vinyl acetate used as a solar panel adhesive and encapsulant.

Surface microstructuring to modify wettability for 3D printing of nano-filled inks (2016)
Journal Article

This paper investigates the effect of surface wettability on the cross-sectional profiles of printed nanofluid inks which can have a significant role on conductivity of printed lines that are used in the production of printed electronics. Glass subst... Read More about Surface microstructuring to modify wettability for 3D printing of nano-filled inks.

An investigation of the behavior of solvent based polycaprolactone ink for material jetting (2016)
Journal Article

Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications (2016)
Journal Article

In this article, we report the first continuous fabrication of inkjet-printed polyimide films, which were used as insulating layers for the production of capacitors. The polyimide ink was prepared from its precursor poly(amic) acid, and directly prin... Read More about Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications.

Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing? (2016)
Journal Article

Additive manufacturing (AM) technology is capable of building up component geometry in a layer-by-layer process, entirely without tools, molds, or dies. One advantage of the approach is that it is capable of efficiently creating complex product geome... Read More about Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing?.

3D Printing of Biocompatible Supramolecular Polymers and their Composites (2016)
Journal Article

A series of polymers capable of self-assembling into infinite networks via supramolecular interactions have been designed, synthesized, and characterized for use in 3D printing applications. The biocompatible polymers and their composites with silica... Read More about 3D Printing of Biocompatible Supramolecular Polymers and their Composites.

Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents (2016)
Journal Article

1-Ethyl-3-methylimidazolium acetate ([C2C1Im][OAc]) and 1-butyl-3-methylimidazolium acetate ([C4C1Im][OAc]) have been used as solvents for the dissolution and ink-jet printing of cellulose from 1.0 to 4.8 wt%, mixed with the co-solvents 1-butanol and... Read More about Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents.

Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography (2016)
Journal Article

We used X-ray computed tomography (CT), microscopy and hardness measurements to study Al–Si10–Mg produced by selective laser melting (SLM). Specimens were subject to a series of heat treatments including annealing and precipitation hardening. The spe... Read More about Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography.