All Outputs (42)

Failure modes and reliability oriented system design for aerospace power electronic converters (2020)
Journal Article

Aircraft electrification has been a major trend in aviation industry for past 20 years. Given the increasing electrical power requirement for future more electric aircraft and hybrid electric aircraft, research efforts has been ongoing in high power... Read More about Failure modes and reliability oriented system design for aerospace power electronic converters.

Quasi Z-Source Hybrid Modular Multilevel Converter Controlled By Reduced Inserted Cells Modulation Technique For Medium Voltage Applications (2020)
Presentation / Conference

This paper presents a novel quasi Z-source Hybrid modular multilevel converter (qZS-HMMC) for medium voltage applications where the “hybrid” concept refers to the implementation of the MMC strings that consist of a mixture of half bridge sub-modules... Read More about Quasi Z-Source Hybrid Modular Multilevel Converter Controlled By Reduced Inserted Cells Modulation Technique For Medium Voltage Applications.

Sequential Predictive Current Control of a VSI with Common-Mode Voltage Reduction (2020)
Conference Proceeding

The voltage source inverter (VSI) is a classic topology widely used for ac conversion. In this paper sequential predictive control (SPC) is applied to a VSI converter that supplies a RL load. The objective is to demonstrate the potential of this new... Read More about Sequential Predictive Current Control of a VSI with Common-Mode Voltage Reduction.

Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation (2020)
Journal Article

In this article, we describe the research and development of a 3 kV active rectifier for a 4 MW aerospace generator drive system demonstrator. The converter is fed by a multiphase high-speed/high-frequency permanent magnet generator. The main aim of... Read More about Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation.

A Review of Control Techniques in Photovoltaic Systems (2020)
Journal Article

Complex control structures are required for the operation of photovoltaic electrical energy systems. In this paper, a general review of the controllers used for photovoltaic systems is presented. This review is based on the most recent papers present... Read More about A Review of Control Techniques in Photovoltaic Systems.

Control Techniques for a Single-Phase Matrix Converter (2020)
Journal Article

The single-phase matrix converter is an AC-AC power topology which consists of six bidirectional switches and it is considered the key unit in cascade or multilevel configurations. In this paper, a comparison between two control techniques is present... Read More about Control Techniques for a Single-Phase Matrix Converter.

Single Integration for Multi-objective Control (2020)
Conference Proceeding

The saturation issue with paralleled PI controllers in multi-objective control is investigated. Dual-Active-Bridge (DAB) enabled DC micro-grid stabilization is chosen as a case study. The DAB converter has two control objectives: battery current regu... Read More about Single Integration for Multi-objective Control.

Machine Learning Based Correction Model in PMSM Power Loss Estimation for More-Electric Aircraft Applications (2020)
Conference Proceeding

This study utilizes the machine learning (ML) technique to estimate the power loss of surface-mounted Permanent Magnet Synchronous Motor (PMSM) for More-Electric Aircraft (MEA). Existing approaches do not consider ML methods in power loss calculation... Read More about Machine Learning Based Correction Model in PMSM Power Loss Estimation for More-Electric Aircraft Applications.

Model-Based Predictive Rotor Current Control Strategy for Indirect Power Control of a DFIM Driven by an Indirect Matrix Converter (2020)
Journal Article

This paper presents a new control strategy using model-based predictive current control (MB-PCC) for a doubly fed induction machine (DFIM) driven by an indirect matrix converter (IMC). This strategy proposes the control of rotor currents, whose refer... Read More about Model-Based Predictive Rotor Current Control Strategy for Indirect Power Control of a DFIM Driven by an Indirect Matrix Converter.

The Analysis Performance of a Grid-Connected 8.2 kWp Photovoltaic System in the Patagonia Region (2020)
Journal Article

Solar PV structures for locations at high latitudes in the Northern and Southern Hemispheres are increasingly in the spotlight. The work reported in this paper analyses the behaviour of a grid-connected 8.2 kWp photovoltaic system to either feed on-s... Read More about The Analysis Performance of a Grid-Connected 8.2 kWp Photovoltaic System in the Patagonia Region.

Computation of time probability distributions for the occurrence of uncertain future events (2020)
Journal Article

The determination of the time at which an event may take place in the future is a well-studied problem in a number of science and engineering disciplines. Indeed, for more than fifty years, researchers have tried to establish adequate methods to char... Read More about Computation of time probability distributions for the occurrence of uncertain future events.

An Overview of Applications of the Modular Multilevel Matrix Converter (2020)
Journal Article

The modular multilevel matrix converter is a relatively new power converter topology suitable for high-power alternating current (AC)-to-AC applications. Several publications in the literature have highlighted the converter capabilities, such as full... Read More about An Overview of Applications of the Modular Multilevel Matrix Converter.

Speed-Sensorless Finite Control Set Model Predictive Control of PMSM with Permanent Magnet Flux Linkage Estimation (2020)
Conference Proceeding

Permanent magnet synchronous motors (PMSMs) have become the focus of interest in electrical machine drive systems due to their advantages. These motors can have a nonlinear model with time-varying parameters, making them difficult to control. Therefo... Read More about Speed-Sensorless Finite Control Set Model Predictive Control of PMSM with Permanent Magnet Flux Linkage Estimation.

Finite Control Set Model Predictive Control of Isolated DC/DC Modular Multilevel Converter (2020)
Conference Proceeding

© 2020 IEEE. Isolated DC/DC modular multilevel converters (MMC) consisting of two MMCs isolated by a transformer are one of the converter topologies being considered used for DC/DC conversion in HVDC transmission. Two level modulation can be used to... Read More about Finite Control Set Model Predictive Control of Isolated DC/DC Modular Multilevel Converter.

Multiphase fault tolerant distributed control techniques for integrated drives based on resonant regulators (2020)
Conference Proceeding

One of the challenges brought forward by the gradual electrification undertaken by the aviation sector is the requirement of fault tolerance for machine drive systems to be used for critical on-board tasks such as propulsion or primary flight surface... Read More about Multiphase fault tolerant distributed control techniques for integrated drives based on resonant regulators.

Synchronous Control Method of Three-phase Inverter Under Unbalanced Conditions Using the Energy Operator (2020)
Conference Proceeding

Unbalanced three-phase voltages, harmonics and DC offset to the grid voltage will affect the speed and accuracy of a grid-connected inverter when estimating the frequency and phase angle of the grid voltage. Existing synchronization methods were diff... Read More about Synchronous Control Method of Three-phase Inverter Under Unbalanced Conditions Using the Energy Operator.

Over-modulation Method of Modulated Model Predictive Control for Matrix Converters (2020)
Conference Proceeding

In this paper the potential of the modulated model predictive control (MMPC) to control a matrix converter (MC) in the linear- and over-modulation zone is investigated. Input and output current references of MC are usually used to define the control... Read More about Over-modulation Method of Modulated Model Predictive Control for Matrix Converters.

Indirect Matrix Converter-Based Grid-Tied Photovoltaics System for Smart Grids (2020)
Journal Article

This paper proposes an Indirect Matrix Converter (IMC)-based grid-tied Photovoltaic (PV) system for Smart Grids (SGs). The PV array injects current in the ‘dc link’ of the IMC through an inductive link, and is connected to the SG with shunt and serie... Read More about Indirect Matrix Converter-Based Grid-Tied Photovoltaics System for Smart Grids.

An Overview of Modelling Techniques and Control Strategies for Modular Multilevel Matrix Converters (2020)
Journal Article

Filter Design and Optimization of Electromechanical Actuation Systems Using Search and Surrogate Algorithms for More-Electric Aircraft Applications (2020)
Journal Article

In this paper, a dc filter design and optimization problem is studied for dc electrical power distribution systems onboard more-electric aircraft. Component sizing models are built to serve as the basis of the optimization whose objectives are mass a... Read More about Filter Design and Optimization of Electromechanical Actuation Systems Using Search and Surrogate Algorithms for More-Electric Aircraft Applications.