All Outputs (12)

Insights into the mechanical properties of several triplyperiodic minimal surface lattice structures made by polymeradditive manufacturing (2017)
Journal Article

Three-dimensional lattices have applications across a range of fields including structural lightweighting, impact absorption and biomedicine. In this work, lattices based on triply periodic minimal surfaces were produced by polymer additive manufactu... Read More about Insights into the mechanical properties of several triplyperiodic minimal surface lattice structures made by polymeradditive manufacturing.

Targeted rework strategies for powder bed additive manufacture (2017)
Journal Article

A major factor limiting the adoption of powder-bed-fusion additive manufacturing for production of parts is the control of build process defects and the effect these have upon the certification of parts for structural applications. In response to thi... Read More about Targeted rework strategies for powder bed additive manufacture.

Strategies for functionally graded lattice structures derived using topology optimisation for additive manufacturing (2017)
Journal Article

A number of strategies that enable lattice structures to be derived from Topology Optimisation (TO) results suitable for Additive Manufacturing (AM) are presented. The proposed strategies are evaluated for mechanical performance and assessed for AM s... Read More about Strategies for functionally graded lattice structures derived using topology optimisation for additive manufacturing.

3D reactive inkjet printing of polydimethylsiloxane (2017)
Journal Article

© 2017 The Royal Society of Chemistry. Material jetting is a process whereby liquid material can be deposited onto a substrate to solidify. Through a process of progressive additional layers, this deposition can then be used to produce 3D structures.... Read More about 3D reactive inkjet printing of polydimethylsiloxane.

3D inkjet printing of electronics using UV conversion (2017)
Journal Article

The production of electronic circuits and devices is limited by current manufacturing methods that limit both the form and potentially the performance of these systems. Additive Manufacturing (AM) is a technology that has been shown to provide cross... Read More about 3D inkjet printing of electronics using UV conversion.

3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release (2017)
Journal Article

A hot melt 3D inkjet printing method with the potential to manufacture formulations in complex and adaptable geometries for the controlled loading and release of medicines is presented. This first use of a precisely controlled solvent free inkjet pri... Read More about 3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release.

A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting (2017)
Journal Article

© 2017 Support structures and materials are indispensable components in many Additive Manufacturing (AM) systems in order to fabricate complex 3D structures. For inkjet-based AM techniques (known as Material Jetting), there is a paucity of studies o... Read More about A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting.

Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM (2017)
Journal Article

Innovative Additive Manufacturing (AM) technologies like Selective Laser Melting (SLM) could prove to be efficient for the processing of brittle silicon steel (Fe-Si) with high silicon content. This research elucidates the effects of heat-treatment o... Read More about Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM.

Design framework for multifunctional additive manufacturing: coupled optimization strategy for structures with embedded functional systems (2017)
Journal Article

The driver for this research is the development of multi-material additive manufacturing processes that provide the potential for multi-functional parts to be manufactured in a single operation. In order to exploit the potential benefits of this emer... Read More about Design framework for multifunctional additive manufacturing: coupled optimization strategy for structures with embedded functional systems.

Selective laser melting of aluminium alloys (2017)
Journal Article

Metal additive manufacturing (AM) processes, such as selective laser melting, enable powdered metals to be formed into arbitrary 3D shapes. For aluminium alloys, which are desirable in many high-value applications for their low density and good mecha... Read More about Selective laser melting of aluminium alloys.

An investigation into the depth and time dependent behavior of UV cured 3D ink jet printed objects (2017)
Journal Article

An ultra-violet (UV) curable ink jet 3D printed material was characterized by an inverse finite element modeling (IFEM) technique employing a nonlinear viscoelastic–viscoplastic (NVEVP) material constitutive model; this methodology was compared direc... Read More about An investigation into the depth and time dependent behavior of UV cured 3D ink jet printed objects.

Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys (2017)
Journal Article

The high thermal gradients experienced during manufacture via selective laser melting commonly result in cracking of high γ/γ′ Nickel based superalloys. Such defects cannot be tolerated in applications where component integrity is of paramount import... Read More about Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys.