All Outputs (107)

Machining SiC fibre reinforced metal matrix composites – How do different matrix materials affect the cutting performance? (2024)
Journal Article

SiC fibre reinforced metal matrix composites find widespread application but show major machining difficulties due to significant variations in constituents' properties. In this sense, while the SiC fibre plays significant strengthening effects, the... Read More about Machining SiC fibre reinforced metal matrix composites – How do different matrix materials affect the cutting performance?.

Modelling of modular soft robots: From a single to multiple building blocks (2024)
Journal Article

Despite the advances in soft robots, their modelling is still one of the research challenges due to the complexity and non-linearity of their soft nature. A novel design of reconfigurable soft robots was recently introduced to bring more maturity to... Read More about Modelling of modular soft robots: From a single to multiple building blocks.

Modelling and experimental study of laser-assisted milling of fibre reinforced SiC/Ti-6Al-4V metal matrix composite (2023)
Journal Article

Metal matrix composites (MMCs) offer unique advantageous mechanical properties by strengthening a ductile metal matrix with a ceramic reinforcement (e.g., Ti6Al-4 V/SiCf). However, their heterogeneous composition poses machining challenges including... Read More about Modelling and experimental study of laser-assisted milling of fibre reinforced SiC/Ti-6Al-4V metal matrix composite.

An analytical differential kinematics-based method for controlling tendon-driven continuum robots (2023)
Journal Article

Generic and high-performance feedback control is still challenging for tendon-driven continuum robots. Conventional model-based controllers, based on the piecewise constant curvature (PCC) assumption, explicitly require the arc parameters (bending an... Read More about An analytical differential kinematics-based method for controlling tendon-driven continuum robots.

Efficient and Scalable Inverse Kinematics for Continuum Robots (2023)
Journal Article

With their flexible nature, continuum robots offer hyper-redundancy regarding their workspace; their backbone can take many shapes upon a single tip position and orientation. Deciphering which backbone shape to use under certain conditions is crucial... Read More about Efficient and Scalable Inverse Kinematics for Continuum Robots.

A Robust Human–Robot Collaborative Control Approach Based on Model Predictive Control (2023)
Journal Article

Human skill-based robotic control to perform critical manufacturing operations (e.g., repair and inspection for high-value assets) can reduce scrap rates and increase overall profitability in the industrial community. In this study, a human–robotic c... Read More about A Robust Human–Robot Collaborative Control Approach Based on Model Predictive Control.

Investigation of the grain deformation to orthogonal cutting process of the textured Alloy 718 fabricated by laser powder bed fusion (2023)
Journal Article

In the laser powder bed fusion (LPBF), the grains grow in preferential directions depending on the scanning strategies, which results in layer-by-layer builds of particular crystallographic textures. The unique microstructure formed by LPBF results i... Read More about Investigation of the grain deformation to orthogonal cutting process of the textured Alloy 718 fabricated by laser powder bed fusion.

Modeling and simulation of surface generation in manufacturing (2023)
Journal Article

The paper describes the state-of-the-art in modeling and simulation of surface texture and topography generation at micro and nano dimensional scales. Three main classes of manufacturing processes used for the generation of engineering surfaces are... Read More about Modeling and simulation of surface generation in manufacturing.

Synergistic integration of vibration absorption and damping into 3D-printed fixtures for thin-wall machining (2023)
Journal Article

To reduce vibration during machining and to avoid re-manufacture or scrap parts, two main methods have been proposed, vibration damping and absorption. In this paper, a novel synergistic integration between both techniques using pillar elements known... Read More about Synergistic integration of vibration absorption and damping into 3D-printed fixtures for thin-wall machining.

Inverse size effect and deformation mechanism in Ti-6Al-4V cutting process – investigation on effect of bimodal microstructure on machining (2023)
Journal Article

Ti-6Al-4 V finds wide applications in industrial areas due to its unique properties. Though, how its special microstructure (i.e., properties mismatch between different phases) could influence the surface/chip formation mechanism when machining (e.g.... Read More about Inverse size effect and deformation mechanism in Ti-6Al-4V cutting process – investigation on effect of bimodal microstructure on machining.

The effect of high strain rate impact in Yttria stabilized zirconia (2023)
Journal Article

Yttria stabilized zirconia (6-8YSZ) is widely used as a top coat in Thermal Barrier Coatings (TBCs) to protect metallic substrates. These coatings are exposed to severe high strain rate fields along their life, for example during the impact of debris... Read More about The effect of high strain rate impact in Yttria stabilized zirconia.

Continuum Robots: An Overview (2023)
Journal Article

In this paper, we discuss recent advances, current limitations, and open challenges in the design, modeling, and control of continuum robots. Thanks to their lean bodies, these robots achieve a long reach through narrow and tortuous environments, ena... Read More about Continuum Robots: An Overview.

Tailorable shielded compliance of thermal barrier coatings through laser texturing and microstructural modification: microfeature design and validation (2023)
Journal Article

Thermal barrier coatings (TBCs) are widely used for protecting components from an aggressive environment and excessive temperatures. However, the top coat can lack thermal compliance and environmental resistance, promoting premature failure. This stu... Read More about Tailorable shielded compliance of thermal barrier coatings through laser texturing and microstructural modification: microfeature design and validation.

A rational approach to beam path planning in additive manufacturing: the inverse heat placement problem (2023)
Journal Article

High demand for components with complex geometries at macro and micro levels drives the development of additive manufacturing (AM). However, the scientific basis for designing energy beam scanning strategies (e.g. beam scanning speed, beam path, beam... Read More about A rational approach to beam path planning in additive manufacturing: the inverse heat placement problem.

Design and Control of a Multiple-Section Continuum Robot With a Hybrid Sensing System (2023)
Journal Article

After decades of development, the technology of continuum robots continues to mature gradually and is used for various applications, e.g., inspection and repair in high-value-added industries such as aerospace & nuclear. However, such robots are inva... Read More about Design and Control of a Multiple-Section Continuum Robot With a Hybrid Sensing System.

Machining of long ceramic fibre reinforced metal matrix composites – How could temperature influence the cutting mechanisms? (2023)
Journal Article

Metal matrix composites (MMCs) offer a unique set of properties due to the ductile-brittle combination produced by the matrix and the reinforcements. Conventional MMCs are usually particle-reinforced, and their cutting mechanisms have been thoroughly... Read More about Machining of long ceramic fibre reinforced metal matrix composites – How could temperature influence the cutting mechanisms?.

Tasering Twin Soft Robot: A Multimodal Soft Robot Capable of Passive Flight and Wall Climbing (2022)
Journal Article

The application of Soft Crawling Robots (SCRs) to real-world scenarios remains a grand challenge due to their limited deployment time to reach the target and accessibility to difficult-to-reach environments by any obstacles. To overcome these limitat... Read More about Tasering Twin Soft Robot: A Multimodal Soft Robot Capable of Passive Flight and Wall Climbing.

What micro-mechanical testing can reveal about machining processes (2022)
Journal Article

For many years, the machining community has dedicated significant efforts to investigate the microscopic scale level phenomena during the material removal process. On one hand much research has been carried out in relation to workpiece surface integr... Read More about What micro-mechanical testing can reveal about machining processes.

On modelling coolant penetration into the microchannels at the tool-workpiece interface (2022)
Journal Article

A network of microchannels is formed at the interface between the cutting tool and the workpiece during machining due to their rough surface structures. The penetration of coolant into these microchannels has a great effect on the machined surface qu... Read More about On modelling coolant penetration into the microchannels at the tool-workpiece interface.

Reconfigurable Soft Robots by Building Blocks (2022)
Journal Article

Soft robots are of increasing interest as they can cope with challenges that are poorly addressed by conventional rigid-body robots (e.g., limited flexibility). However, due to their flexible nature, the soft robots can be particularly prone to explo... Read More about Reconfigurable Soft Robots by Building Blocks.