All Outputs (77)

Achieving Microparticles with Cell-Instructive Surface Chemistry by Using Tunable Co-Polymer Surfactants (2020)
Journal Article
Dundas, A. A., Cuzzucoli Crucitti, V., Haas, S., Dubern, J., Latif, A., Romero, M., Sanni, O., Ghaemmaghami, A. M., Williams, P., Alexander, M. R., Wildman, R., & Irvine, D. J. (2020). Achieving Microparticles with Cell-Instructive Surface Chemistry by Using Tunable Co-Polymer Surfactants. Advanced Functional Materials, 30(36), Article 2001821. https://doi.org/10.1002/adfm.202001821

© 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim A flow-focusing microfluidic device is used to produce functionalized monodisperse polymer particles with surface chemistries designed to control bacterial biofilm formatio... Read More about Achieving Microparticles with Cell-Instructive Surface Chemistry by Using Tunable Co-Polymer Surfactants.

Discovery of (meth)acrylate polymers that resist colonization by fungi associated with pathogenesis and biodeterioration (2020)
Journal Article
Vallieres, C., Hook, A. L., He, Y., Crucitti, V. C., Figueredo, G., Davies, C. R., Burroughs, L., Winkler, D. A., Wildman, R. D., Irvine, D. J., Alexander, M. R., & Avery, S. V. (2020). Discovery of (meth)acrylate polymers that resist colonization by fungi associated with pathogenesis and biodeterioration. Science Advances, 6(23), Article eaba6574. https://doi.org/10.1126/sciadv.aba6574

© 2020 The Authors. Fungi have major, negative socioeconomic impacts, but control with bioactive agents is increasingly restricted, while resistance is growing. Here, we describe an alternative fungal control strategy via materials operating passivel... Read More about Discovery of (meth)acrylate polymers that resist colonization by fungi associated with pathogenesis and biodeterioration.

A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants (2020)
Journal Article
He, Y., Foralosso, R., Ferraz Trindade, G., Ilchev, A., Cantu, L. R., Clark, E., Khaled, S., Hague, R. J. M., Tuck, C. J., Rose, F. R. A. J., Mantovani, G., Irvine, D., Roberts, C. J., & Wildman, R. D. (2020). A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants. Advanced Therapeutics, 3(6), Article 1900187. https://doi.org/10.1002/adtp.201900187

We propose a strategy for creating tuneable 3D printed drug delivery devices. 3D printing offers the opportunity for improved compliance and patient treatment outcomes through personalisation, but bottlenecks include finding formulations that provide... Read More about A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants.

Making tablets for delivery of poorly soluble drugs using photoinitiated 3D inkjet printing (2019)
Journal Article
Clark, E. A., Alexander, M. R., Irvine, D. J., Roberts, C. J., Wallace, M. J., Yoo, J., & Wildman, R. D. (2020). Making tablets for delivery of poorly soluble drugs using photoinitiated 3D inkjet printing. International Journal of Pharmaceutics, 578, Article 118805. https://doi.org/10.1016/j.ijpharm.2019.118805

© 2019 In this study, we investigate the viability of three-dimensional (3D) inkjet printing with UV curing to produce solid dosage forms containing a known poorly soluble drug, carvedilol. The formulation consists of 10 wt% carvedilol, Irgacure 2959... Read More about Making tablets for delivery of poorly soluble drugs using photoinitiated 3D inkjet printing.

Validating a Predictive Structure-Property Relationship by Discovery of Novel Polymers which Reduce Bacterial Biofilm Formation (2019)
Journal Article
Dundas, A. A., Sanni, O., Dubern, J.-F., Dimitrakis, G., Hook, A. L., Irvine, D. J., Williams, P., & Alexander, M. R. (2019). Validating a Predictive Structure-Property Relationship by Discovery of Novel Polymers which Reduce Bacterial Biofilm Formation. Advanced Materials, 31(49), Article 1903513. https://doi.org/10.1002/adma.201903513

ynthetic materials are an everyday component of modern healthcare yet often fail routinely as a consequence of medical‐device‐centered infections. The incidence rate for catheter‐associated urinary tract infections is between 3% and 7% for each day o... Read More about Validating a Predictive Structure-Property Relationship by Discovery of Novel Polymers which Reduce Bacterial Biofilm Formation.

High-throughput characterization of fluid properties to predict droplet ejection for three-dimensional inkjet printing formulations (2019)
Journal Article
Zhou, Z., Ruiz Cantu, L., Chen, X., Alexander, M. R., Roberts, C. J., Hague, R., Tuck, C., Irvine, D., & Wildman, R. (2019). High-throughput characterization of fluid properties to predict droplet ejection for three-dimensional inkjet printing formulations. Additive Manufacturing, 29, Article 100792. https://doi.org/10.1016/j.addma.2019.100792

Inkjet printing has been used as an Additive Manufacturing (AM) method to fabricate three-dimensional (3D) structures. However, a lack of materials suitable for inkjet printing poses one of the key challenges that impedes industry from fully adopting... Read More about High-throughput characterization of fluid properties to predict droplet ejection for three-dimensional inkjet printing formulations.

Methodology for the synthesis of methacrylate monomers using designed single mode microwave applicators (2019)
Journal Article
Dundas, A. A., Hook, A. L., Alexander, M. R., Kingman, S. W., Dimitrakis, G., & Irvine, D. J. (2019). Methodology for the synthesis of methacrylate monomers using designed single mode microwave applicators. Reaction Chemistry and Engineering, 4(8), 1472-1476. https://doi.org/10.1039/c9re00173e

© 2019 The Royal Society of Chemistry. A novel single-well prototype high throughput microwave reactor geometry has been produced and shown to be capable of synthesizing an array of non-commercially available methacrylate monomers. The reactor, which... Read More about Methodology for the synthesis of methacrylate monomers using designed single mode microwave applicators.

Optimised use of dielectric spectroscopy at microwave frequencies for direct online monitoring of polymerisation reactions (2019)
Journal Article
Kalamiotis, A., Ilchev, A., Irvine, D. J., & Dimitrakis, G. (2019). Optimised use of dielectric spectroscopy at microwave frequencies for direct online monitoring of polymerisation reactions. Sensors and Actuators B: Chemical, 290C, 34-40. https://doi.org/10.1016/j.snb.2019.03.120

This study reports the first use of dielectric spectroscopy over at a wide frequency range to monitor, in real time, the progress of a ring opening polymerisation. An open-ended coaxial line sensor was placed directly into the reaction medium of a po... Read More about Optimised use of dielectric spectroscopy at microwave frequencies for direct online monitoring of polymerisation reactions.

Predicting the Behaviour of Near-Critical and Supercritical Alcohols at Microwave Frequencies: Validation of Molecular Dynamic Simulations as a Tool that can Substitute for Measurements under Extreme Experimental Conditions (2019)
Journal Article
Robinson, D., Irvine, D. J., Robinson, J. P., Lester, E. H., Kingman, S. W., & Dimitrakis, G. (2019). Predicting the Behaviour of Near-Critical and Supercritical Alcohols at Microwave Frequencies: Validation of Molecular Dynamic Simulations as a Tool that can Substitute for Measurements under Extreme Experimental Conditions. Journal of Supercritical Fluids, 146, 165-171. https://doi.org/10.1016/j.supflu.2019.01.018

Equilibrium and non-equilibrium molecular dynamic simulations, predicting the dielectric properties of near-critical and supercritical methanol and ethanol at microwave frequencies have been carried out. The autocorrelation functions of the dielectri... Read More about Predicting the Behaviour of Near-Critical and Supercritical Alcohols at Microwave Frequencies: Validation of Molecular Dynamic Simulations as a Tool that can Substitute for Measurements under Extreme Experimental Conditions.

Synthesis of methacrylate-terminated block copolymers with reduced transesterification by controlled ring-opening polymerization (2018)
Journal Article
Ruiz-Cantu, L. A., Pearce, A. K., Burroughs, L., Bennett, T. M., Vasey, C. E., Wildman, R., Irvine, D. J., Alexander, C., & Taresco, V. (2019). Synthesis of methacrylate-terminated block copolymers with reduced transesterification by controlled ring-opening polymerization. Macromolecular Chemistry and Physics, 220(2), Article 1800459. https://doi.org/10.1002/macp.201800459

This work presents a robust method to achieve the synthesis of low molecular weight polyesters 26 via ring-opening polymerization (ROP) initiated by 2-hydroxyethyl-methacrylate (HEMA) 27 when using triazabicyclodecene (TBD) as catalyst. The effect th... Read More about Synthesis of methacrylate-terminated block copolymers with reduced transesterification by controlled ring-opening polymerization.

Extrusion 3D printing of paracetamol tablets from a single formulation with tunable release profiles through control of tablet geometry (2018)
Journal Article
Khaled, S. A., Alexander, M. R., Irvine, D. J., Wildman, R. D., Wallace, M. J., Sharpe, S., Yoo, J., & Roberts, C. J. (2018). Extrusion 3D printing of paracetamol tablets from a single formulation with tunable release profiles through control of tablet geometry. AAPS PharmSciTech, 19(8), 3403–3413. https://doi.org/10.1208/s12249-018-1107-z

An extrusion based 3D printer was used to fabricate paracetamol tablets with different geometries (mesh, ring, and solid) from a single paste-based formulation formed from standard pharmaceutical ingredients. The tablets demonstrate that tunable drug... Read More about Extrusion 3D printing of paracetamol tablets from a single formulation with tunable release profiles through control of tablet geometry.

Synthesis and control of crosslinked poly(acrylic acid) based viscosity modifiers using dense phase carbon dioxide as a solvent (2018)
Journal Article
Alexander, W., Wickson, J., Duncan, J., Carmichael, K., Irvine, D., & Howdle, S. (2018). Synthesis and control of crosslinked poly(acrylic acid) based viscosity modifiers using dense phase carbon dioxide as a solvent. Journal of Supercritical Fluids, 139, 38-44. https://doi.org/10.1016/j.supflu.2018.05.003

We investigate the clean synthesis of a cross-linked poly(acrylic acid) viscosity modifier using supercritical CO2 to replace more hazardous volatile organic solvents that are typically used for this process. The polymers were analysed by aqueous swe... Read More about Synthesis and control of crosslinked poly(acrylic acid) based viscosity modifiers using dense phase carbon dioxide as a solvent.

Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction (2018)
Journal Article
Hu, Q., Sun, X.-Z., Parmenter, C. D. J., Fay, M. W., Smith, E. F., Rance, G. A., He, Y., Zhang, F., Liu, Y., Irvine, D., Tuck, C., Hague, R., & Wildman, R. (2018). Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Scientific Reports, 8(1), Article 3512. https://doi.org/10.1038/s41598-018-21513-8

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Identification of novel ‘inks’ for 3D printing using high throughput screening: bioresorbable photocurable polymers for controlled drug delivery (2018)
Journal Article
Louzao, I., Koch, B., Taresco, V., Ruiz Cantu, L., Irvine, D. J., Roberts, C. J., Tuck, C. J., Alexander, C., Hague, R. J., Wildman, R. D., & Alexander, M. R. (in press). Identification of novel ‘inks’ for 3D printing using high throughput screening: bioresorbable photocurable polymers for controlled drug delivery. ACS Applied Materials and Interfaces, 10(8), https://doi.org/10.1021/acsami.7b15677

A robust discovery methodology is presented to identify novel biomaterials suitable for 3D printing. Currently the application of Additive Manufacturing is limited by the availability of functional inks, especially in the area of biomaterials-this me... Read More about Identification of novel ‘inks’ for 3D printing using high throughput screening: bioresorbable photocurable polymers for controlled drug delivery.

Prediction of Broad-Spectrum Pathogen Attachment to Coating Materials for Biomedical Devices (2018)
Journal Article
Dundas, A. A., Mikulskis, P., Hook, A., Dundas, A., Irvine, D., Sanni, O., Anderson, D., Langer, R., Alexander, M. R., Williams, P., & Winkler, D. A. (2018). Prediction of Broad-Spectrum Pathogen Attachment to Coating Materials for Biomedical Devices. ACS Applied Materials and Interfaces, 10(1), 139-149. https://doi.org/10.1021/acsami.7b14197

© 2017 American Chemical Society. Bacterial infections in healthcare settings are a frequent accompaniment to both routine procedures such as catheterization and surgical site interventions. Their impact is becoming even more marked as the numbers of... Read More about Prediction of Broad-Spectrum Pathogen Attachment to Coating Materials for Biomedical Devices.

Processing and properties of PLA-HA nanocomposites: The effect of particle morphology and dispersants (2017)
Presentation / Conference Contribution
Tomczynska, M. M., Ward, M., Choong, G. Y. H., Walton, K., De Focatiis, D. S. A., Grant, D. M., Irvine, D. J., & Parsons, A. J. (2016, July). Processing and properties of PLA-HA nanocomposites: The effect of particle morphology and dispersants. Presented at 32nd International Conference of the Polymer Processing Society (PPS-32), Lyon, France

Biodegradable polylactic acid nanocomposites for orthopaedic implants require optimum particle dispersion and high molecular weight in load bearing applications. Novel coated hydroxyapatite nanoparticles can offer new opportunities for enhanced dispe... Read More about Processing and properties of PLA-HA nanocomposites: The effect of particle morphology and dispersants.

Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction (2017)
Journal Article
Parmenter, C. D. J., Hu, Q., Sun, X. Z., Parmenter, C. D., Fay, M. W., Smith, E. F., Rance, G. A., He, Y., Zhang, F., Liu, Y., Irvine, D., Tuck, C., Hague, R., & Wildman, R. (2017). Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Scientific Reports, 7(1), Article 17150. https://doi.org/10.1038/s41598-017-17391-1

© 2017 The Author(s). The fabrication of complex three-dimensional gold-containing nanocomposite structures by simultaneous two-photon polymerisation and photoreduction is demonstrated. Increased salt delivers reduced feature sizes down to line width... Read More about Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction.

Selective molecular annealing: in situ small angle X-ray scattering study of microwave-assisted annealing of block copolymers (2017)
Journal Article
Toolan, D. T., Adlington, K., Isakova, A., Kalamiotis, A., Mokarian-Tabari, P., Dimitrakis, G., Dodds, C., Arnold, T., Terrill, N. J., Bras, W., Hermida Merino, D., Topham, P. D., Irvine, D., & Howse, J. R. (2017). Selective molecular annealing: in situ small angle X-ray scattering study of microwave-assisted annealing of block copolymers. Physical Chemistry Chemical Physics, 19(31), 20412--20419. https://doi.org/10.1039/c7cp03578k

Microwave annealing has emerged as an alternative to traditional thermal annealing approaches for optimising block copolymer self-assembly. A novel sample environment enabling small angle X-ray scattering to be performed in situ during microwave anne... Read More about Selective molecular annealing: in situ small angle X-ray scattering study of microwave-assisted annealing of block copolymers.

Wet and dry flexural high cycle fatigue behaviour of fully bioresorbable glass fibre composites: In-situ polymerisation versus laminate stacking (2017)
Journal Article
Chen, M., Lu, J., Felfel, R. M., Parsons, A. J., Irvine, D. J., Rudd, C. D., & Ahmed, I. (2017). Wet and dry flexural high cycle fatigue behaviour of fully bioresorbable glass fibre composites: In-situ polymerisation versus laminate stacking. Composites Science and Technology, 150, 1-15. https://doi.org/10.1016/j.compscitech.2017.07.006

Fully bioresorbable phosphate based glass fibre reinforced polycaprolactone (PCL/PGF) composites are potentially excellent candidates to address current issues experienced with use of metal implants for hard tissue repair, such as stress shielding ef... Read More about Wet and dry flexural high cycle fatigue behaviour of fully bioresorbable glass fibre composites: In-situ polymerisation versus laminate stacking.

3D printing of tablets using inkjet with UV photoinitiation (2017)
Journal Article
Clark, E. A., Alexander, M. R., Irvine, D. J., Roberts, C. J., Wallace, M. J., Sharpe, S., Yoo, J., Hague, R. J., Tuck, C. J., & Wildman, R. D. (2017). 3D printing of tablets using inkjet with UV photoinitiation. International Journal of Pharmaceutics, 529(1-2), 523-530. https://doi.org/10.1016/j.ijpharm.2017.06.085

Additive manufacturing (AM) offers significant potential benefits in the field of drug delivery and pharmaceutical/medical device manufacture. Of AM processes, 3D inkjet printing enables precise deposition of a formulation, whilst offering the potent... Read More about 3D printing of tablets using inkjet with UV photoinitiation.