All Outputs (81)

Review on onshore and offshore large-scale seasonal hydrogen storage for electricity generation: Focusing on improving compression, storage, and roundtrip efficiency (2024)
Journal Article

This article presents a comprehensive review of the current landscape and prospects of large-scale hydrogen storage technologies, with a focus on both onshore and offshore applications, and flexibility. Highlighting the evolving technological advance... Read More about Review on onshore and offshore large-scale seasonal hydrogen storage for electricity generation: Focusing on improving compression, storage, and roundtrip efficiency.

Self-assembled titanium-based macrostructures with hierarchical (macro-, micro-, and nano) porosities: A fundamental study (2024)
Journal Article

This study details the novel self-assembly of sodium titanate converted Ti-based microspheres into hierarchical porous 3D constructs, with macro-, micro-, and nanoporosity, for the first time. Ti6Al4V microspheres were suspended into 5 M NaOH (60 °C/... Read More about Self-assembled titanium-based macrostructures with hierarchical (macro-, micro-, and nano) porosities: A fundamental study.

Functional performance of a bi-layered chitosan-nano-hydroxyapatite osteochondral scaffold: a pre-clinical in vitro tribological study (2024)
Journal Article

Osteochondral grafts are used for repair of focal osteochondral lesions. Autologous grafts are the gold standard treatment; however, limited graft availability and donor site morbidity restrict use. Therefore, there is a clinical need for different g... Read More about Functional performance of a bi-layered chitosan-nano-hydroxyapatite osteochondral scaffold: a pre-clinical in vitro tribological study.

Stoichiometry and annealing condition on hydrogen capacity of TiCr2-x AB2 alloys (2023)
Journal Article

This study presents the effect of stoichiometry and annealing condition on Ti–Cr AB2-type hydrogen storage alloys. Prior to annealing the majority phase of the as-cast alloys was the C14 Laves phase, with separate Ti and Cr phases. Annealing treatmen... Read More about Stoichiometry and annealing condition on hydrogen capacity of TiCr2-x AB2 alloys.

Towards Pareto optimal high entropy hydrides via data-driven materials discovery (2023)
Journal Article

The ability to rapidly screen material performance in the vast space of high entropy alloys is of critical importance to efficiently identify optimal hydride candidates for various use cases. Given the prohibitive complexity of first principles simul... Read More about Towards Pareto optimal high entropy hydrides via data-driven materials discovery.

Tailoring absorptivity of highly reflective Ag powders by pulsed-direct current magnetron sputtering for additive manufacturing processes (2023)
Journal Article

Processing of highly reflective and high thermally conductive materials (Cu, Ag, etc.) by laser powder bed fusion (LPBF) is of increasing interest to broaden the range of materials that can be additively manufactured. However, these alloys are challe... Read More about Tailoring absorptivity of highly reflective Ag powders by pulsed-direct current magnetron sputtering for additive manufacturing processes.

Production of Nano Hydroxyapatite and Mg-Whitlockite from Biowaste-Derived products via Continuous Flow Hydrothermal Synthesis: A Step towards Circular Economy (2023)
Journal Article

Biowastes from agriculture, sewage, household wastes, and industries comprise promising resources to produce biomaterials while reducing adverse environmental effects. This study focused on utilising waste-derived materials (i.e., eggshells as a calc... Read More about Production of Nano Hydroxyapatite and Mg-Whitlockite from Biowaste-Derived products via Continuous Flow Hydrothermal Synthesis: A Step towards Circular Economy.

Recent enterprises in high-rate monolithic photo-electrochemical energy harvest and storage devices (2023)
Journal Article

Solar energy is set to play a major role in decarbonising the economy and creating a zero-emissions future. However, there is a need to store this abundant energy and, in many instances, supply that energy at a high rate. With large expense and effic... Read More about Recent enterprises in high-rate monolithic photo-electrochemical energy harvest and storage devices.

Substitutional effect of Ti-based AB2 hydrogen storage alloys: A density functional theory study (2023)
Journal Article

Stability of AB2 alloy in Laves phases C14 and C15 were studied by first-principle density functional theory simulations. A range of different combinations of B and C elements in the Ti1−xCxB2 alloys were considered. The formation energies of these a... Read More about Substitutional effect of Ti-based AB2 hydrogen storage alloys: A density functional theory study.

Nanostructured, Alkaline Titanate‐Converted, and Heat‐Treated Ti6Al4V Microspheres via Wet‐Chemical Alkaline Modification and their ORR Electrocatalytic Response (2022)
Journal Article

This study describes the chemical conversion and heat treatment of Ti6Al4V microspheres (Ti6_MS), and the resulting effects on their electrocatalytic properties. The wet-chemical conversion (5.0m NaOH, 60°C, 24h; Sample label: Ti6_TC) converts the to... Read More about Nanostructured, Alkaline Titanate‐Converted, and Heat‐Treated Ti6Al4V Microspheres via Wet‐Chemical Alkaline Modification and their ORR Electrocatalytic Response.

Hydrogen-Induced Conversion of SnS2 into SnS or Sn: A Route to Create SnS2/SnS Heterostructures (2022)
Journal Article

The family of van der Waals (vdW) materials is large and diverse with applications ranging from electronics and optoelectronics to catalysis and chemical storage. However, despite intensive research, there remains significant knowledge-gaps pertainin... Read More about Hydrogen-Induced Conversion of SnS2 into SnS or Sn: A Route to Create SnS2/SnS Heterostructures.

Highly Aligned Ni-Decorated GO–CNT Nanostructures in Epoxy with Enhanced Thermal and Electrical Properties (2022)
Journal Article

In this study, graphene oxide–carbon nanotubes nanostructures decorated with nickel nanoparticles (NiGNT) were prepared through the molecular-level-mixing method, followed by a reduction process, and then applied as reinforcements to enhance the epox... Read More about Highly Aligned Ni-Decorated GO–CNT Nanostructures in Epoxy with Enhanced Thermal and Electrical Properties.

Engineering the next generation of photorechargeable zinc-air batteries (2022)
Journal Article

Solar energy has been identified as one of the key building blocks of the future energy generation mix required to meet greenhouse gas emissions targets while leading the way to a zero-carbon economy. In our opinion, photorechargeable zinc-air batter... Read More about Engineering the next generation of photorechargeable zinc-air batteries.

Perspective — Redox Ionic Liquid Electrolytes for Supercapattery (2022)
Journal Article

Adding redox activity into ionic liquids (ILs) extends their practical roles beyond an inert ionic conductor or electrolyte for applications in electrochemical energy storage. Especially for supercapatteries, redox ILs are desirable because they can... Read More about Perspective — Redox Ionic Liquid Electrolytes for Supercapattery.

Characterization of potential nanoporous sodium titanate film formation on Ti6Al4V and TiO2 microspherical substrates via wet-chemical alkaline conversion (2022)
Journal Article

The authors present novel insights into the formation of nanoporous, wet-chemically produced sodium titanate films onto microspherical substrates of varying composition. Microspheres of Ti6Al4V (atomised; ca. 20–50 μm), which were utilised due to the... Read More about Characterization of potential nanoporous sodium titanate film formation on Ti6Al4V and TiO2 microspherical substrates via wet-chemical alkaline conversion.

Development and in vitro assessment of a bi-layered chitosan-nano-hydroxyapatite osteochondral scaffold (2022)
Journal Article

An innovative approach was developed to engineer a multi-layered chitosan scaffold for osteochondral defect repair. A combination of freeze drying and porogen-leaching out methods produced a porous, bioresorbable scaffold with a distinct gradient of... Read More about Development and in vitro assessment of a bi-layered chitosan-nano-hydroxyapatite osteochondral scaffold.

Pseudocapacitive Performance of WO3/g-C3N4 Nanocomposites (2021)
Conference Proceeding

Hexagonal tungsten oxide (WO 3 ) holds great promise as an electrode material for pseudocapacitors due to its earth abundance, low cost, multiple oxidation states, high packing density (>7 g cm -3 ) and electrochemical reversibility. Here, we present... Read More about Pseudocapacitive Performance of WO3/g-C3N4 Nanocomposites.

Enhanced thermal and electrical properties by Ag nanoparticles decorated GO-CNT nanostructures in PEEK composites (2021)
Journal Article

A nanostructure of graphene oxide (GO) and carbon nanotubes (CNTs) decorated with silver nanoparticles (AgGNT) has been prepared via a molecular-level-mixing (MLM) method followed by a subsequent freeze-drying and reduction process. The obtained well... Read More about Enhanced thermal and electrical properties by Ag nanoparticles decorated GO-CNT nanostructures in PEEK composites.

The interaction of volatile metal coatings during the laser powder bed fusion of copper (2021)
Journal Article

The high optical reflectance of Cu at near-infrared wavelengths narrows the process window to fabricate Cu parts by laser powder bed fusion (LPBF). Coating powders with optically absorptive materials has been investigated to improve processability an... Read More about The interaction of volatile metal coatings during the laser powder bed fusion of copper.

Long-Term Culture of Stem Cells on Phosphate-Based Glass Microspheres: Synergistic Role of Chemical Formulation and 3D Architecture (2021)
Journal Article

Phosphate-based glasses (PBGs) are biomaterials that degrade under physiological conditions and can be modified to release various ions depending on end applications. This study utilized slow-degrading (P45:45P2O5-16CaO-24MgO-11Na2O10 4Fe2O3, mol %)... Read More about Long-Term Culture of Stem Cells on Phosphate-Based Glass Microspheres: Synergistic Role of Chemical Formulation and 3D Architecture.