All Outputs (346)

Thermal analysis of fault-tolerant electrical machines for aerospace actuators (2018)
Journal Article

For safety critical applications, electrical machines need to satisfy several constraints, in order to be considered fault-tolerant. In fact, if specific design choices and appropriate control strategies are embraced, fault-tolerant machines can oper... Read More about Thermal analysis of fault-tolerant electrical machines for aerospace actuators.

Improved thermal management and analysis for stator end-windings of electrical machines (2018)
Journal Article

In electrical machine design, thermal management plays a key role in improving performance and reducing size. End-windings are commonly identified as the machine hot-spot. Hence, lowering and predicting end-windings temperature are crucial tasks in t... Read More about Improved thermal management and analysis for stator end-windings of electrical machines.

Enhanced power sharing transient with droop controllers for multi-three-phase synchronous electrical machines (2018)
Journal Article

This paper presents a droop-based dis- tributed control strategy for multi-three-phase machines that provides augmented controllability during power shar- ing transients. The proposed strategy is able to mitigate the mutual interactions among differe... Read More about Enhanced power sharing transient with droop controllers for multi-three-phase synchronous electrical machines.

Double Rotor Synchronous Reluctance Machine: Analysis towards Torque Capability (2018)
Conference Proceeding

© 2018 IEEE. This paper presents a comparative analysis of double rotor synchronous reluctance machines. Different topologies of the proposed machine have been investigated, such as double rotor with double-sided stator and double rotor with single-s... Read More about Double Rotor Synchronous Reluctance Machine: Analysis towards Torque Capability.

Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM (2018)
Conference Proceeding

This paper presents a detailed investigation of AC copper losses in high-speed high-power density permanent magnet synchronous machine. For parallel strands winding, it is not easy to accurately estimate the AC copper losses using finite element mode... Read More about Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM.

Electrical Machine Rotor Shielding for Low Cost Electrical Drive (2018)
Conference Proceeding

Electrical machine rotor shielding has been proposed for high-speed electrical machines, i.e. ≥50krpm, where a smooth current waveform becomes difficult and costly to generate due to the required high switching frequency. The rotor shielding is used... Read More about Electrical Machine Rotor Shielding for Low Cost Electrical Drive.

Mass Production Costing of Induction Machines for Automotive Applications (2018)
Conference Proceeding

Cost is one of the key parameters of electric machines designed for automotive applications. In order to keep manufacturing cost low, it is desirable to estimate the manufacturing cost of the machine in the early stages of the design process. For thi... Read More about Mass Production Costing of Induction Machines for Automotive Applications.

Design of an Integrated Inductor for 45kW Aerospace Starter-Generator (2018)
Conference Proceeding

A close physical and functional integration of passive components is required to make an efficient and power dense overall system. Such power dense systems are a prerequisite in aerospace and marine applications. This paper presents a design of an in... Read More about Design of an Integrated Inductor for 45kW Aerospace Starter-Generator.

A methodology to remove stator skew in small-medium size synchronous generators via innovative damper cage designs (2018)
Journal Article

This paper proposes and investigates an innovative methodology that can have a significant impact on the market potential of wound field, small-medium size synchronous generators. The technique proposed here is aimed at removing the need for the trad... Read More about A methodology to remove stator skew in small-medium size synchronous generators via innovative damper cage designs.

Development of aircraft electric starter-generator system based-on active rectification technology (2018)
Journal Article

More-electric aircraft (MEA) has become a dominant trend for modern aircraft. On-board MEA, many functions, which are conventionally driven by pneumatic and hydraulic power, are replaced with electrical subsystems. Starting aircraft engines with an e... Read More about Development of aircraft electric starter-generator system based-on active rectification technology.

Wide bandgap voltage source inverter design for automotive electric drivetrain (2018)
Conference Proceeding

In this paper a high power, high frequency voltage source inverter for automotive traction application is reviewed. The main objectives of the design process is the maximization of power density, while keeping high efficiency and low weight. In this... Read More about Wide bandgap voltage source inverter design for automotive electric drivetrain.

Response to Discussion of “A modular speed-drooped system for high reliability integrated modular motor drives” (2018)
Journal Article

Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle (2018)
Conference Proceeding

A switched reluctance machine (SRM) is very robust and capable to perform well under harsh conditions. It is simple in construction and avoids the use of magnets so it is cheap to manufacture. The powertrain of a hybrid vehicle presents challenging c... Read More about Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle.

Dielectric breakdown of alumina thin films produced by pulsed direct current magnetron sputtering (2018)
Journal Article

Alumina films (~2 μm thick) were deposited with a mixed Cu/Al interlayer onto copper. Direct current (DC)/Pulsed DC (PDC) magnetron sputtering techniques were independently compared for reactive alumina sputtering. In DC sputtered films, elemental al... Read More about Dielectric breakdown of alumina thin films produced by pulsed direct current magnetron sputtering.

Performance Improvement of Bearingless Multisector PMSM With Optimal Robust Position Control (2018)
Journal Article

© 2018 IEEE. Bearingless machines are relatively new devices that consent to suspend and spin the rotor at the same time. They commonly rely on two independent sets of three-phase windings to achieve a decoupled torque and suspension force control. I... Read More about Performance Improvement of Bearingless Multisector PMSM With Optimal Robust Position Control.

A Smart Transformer-Rectifier Unit for the More Electric Aircraft (2018)
Conference Proceeding

In the framework of the More Electric Aircraft (MEA), an efficient and flexible power distribution system is of paramount importance. Considering the presence of both AC and DC loads at multiple voltage levels, the distribution system of the most mod... Read More about A Smart Transformer-Rectifier Unit for the More Electric Aircraft.

Space Weather Prediction to Enhance the Reliability of the More Electric Aircraft (2018)
Conference Proceeding

Power devices manufacturers know that electronic devices are susceptible to radiation events. Galactic Cosmic Rays (GCR) coming from space can interact with the earth atmosphere, generating secondary particles (electrons, neutrons, protons) that can... Read More about Space Weather Prediction to Enhance the Reliability of the More Electric Aircraft.

Eccentric reluctance and permanent magnets synchronous machines comparison (2018)
Journal Article

This paper deals with a comparative study between reluctance (REL), permanent magnet assisted reluctance (PMAREL), and surface mounted permanent magnet synchronous machines with rotor eccentricity. Static, dynamic, and combined eccentricity cases are... Read More about Eccentric reluctance and permanent magnets synchronous machines comparison.

Novel core designs to miniaturise passive magnetic components (2018)
Conference Proceeding

Converter sizes are often dominated by passive magnetic components. Passive magnetic component sizes are in turn limited by electromagnetic saturation and thermal limits. This paper covers two modifications to the air gaps of tape wound amorphous mag... Read More about Novel core designs to miniaturise passive magnetic components.

Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications (2018)
Journal Article

© 1965-2012 IEEE. High-speed permanent magnet synchronous machine (PMSM) can provide high power density and high efficiency, which is often highly desirable in high performance applications. A multi-physics optimization program based on the multi-obj... Read More about Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications.