All Outputs (42)

Thermal degradation of polyvinyl chloride in the presence of lead oxide: A kinetic and mechanistic investigation (2024)
Journal Article

The elimination of toxic heavy metals from metallurgical wastes before its recycling to steel furnaces is essential. Lead oxide (PbO) is a major toxic heavy metal present in electric arc furnace dust (EAFD). The co-recycling of EAFD with Polyvinyl ch... Read More about Thermal degradation of polyvinyl chloride in the presence of lead oxide: A kinetic and mechanistic investigation.

Solving the microwave heating uniformity conundrum for scalable high-temperature processes via a toroidal fluidised-bed reactor (2024)
Journal Article

Challenges exist to implementing high-temperature microwave processes with changing dielectric properties that achieve uniform processing. This paper presents a new high-temperature hybrid microwave processing system which overcomes these challenges... Read More about Solving the microwave heating uniformity conundrum for scalable high-temperature processes via a toroidal fluidised-bed reactor.

Microwave thermal pre-treatment and calcination of biomineralised sorbents for calcium looping (2024)
Journal Article

Waste eggshells have been investigated as biomineralised CO2 sorbents for the calcium looping cycle due to their high Ca content, low cost, availability, and high CO2 uptake. This work investigates a novel heat-pre-treatment using eggshells as raw ma... Read More about Microwave thermal pre-treatment and calcination of biomineralised sorbents for calcium looping.

Microwave pyrolysis of waste biomass and synthesis of micro-mesoporous activated carbons: The role of textural properties for CO2 and textile dye adsorption (2024)
Journal Article

Hierarchical porous activated carbons (ACs) were efficiently synthesized in less than 2 min using microwaves and phosphoric acid (H3PO4), exhibiting excellent potential as adsorbent for carbon dioxide (CO2) and Methylene Blue (MB). The method emphasi... Read More about Microwave pyrolysis of waste biomass and synthesis of micro-mesoporous activated carbons: The role of textural properties for CO2 and textile dye adsorption.

Chlorine Fixing Ability of Electric Arc Furnace Dust During the Thermal Degradation of Polyvinyl Chloride under Oxidative Conditions (2023)
Journal Article

Electric arc furnace dust (EAFD) and polyvinyl chloride (PVC) are two hazardous wastes that are accumulated world-wide at an alarming rate. Utilising these two wastes simultaneously towards a sustainable recycling loop can greatly mitigate their envi... Read More about Chlorine Fixing Ability of Electric Arc Furnace Dust During the Thermal Degradation of Polyvinyl Chloride under Oxidative Conditions.

A thermo-kinetic investigation on the thermal degradation of polyvinyl chloride in the presence of magnetite and hematite (2022)
Journal Article

Electric arc furnace dust (EAFD) which is accumulated in large amounts world-wide contains hematite (Fe2O3) and significant quantities of magnetite (Fe3O4). Waste polyvinyl chloride (PVC) also poses a great environmental threat aside to accumulated E... Read More about A thermo-kinetic investigation on the thermal degradation of polyvinyl chloride in the presence of magnetite and hematite.

Thermodynamic, pyrolytic, and kinetic investigation on the thermal decomposition of polyvinyl chloride in the presence of franklinite (2022)
Journal Article

Thermal co-treatment of Electric Arc Furnace Dust (EAFD) and polyvinyl chloride (PVC) may provide a viable route for reprocessing these hazardous materials within the circular economy. To develop and optimise a commercial treatment process, the compl... Read More about Thermodynamic, pyrolytic, and kinetic investigation on the thermal decomposition of polyvinyl chloride in the presence of franklinite.

S-band elliptical–cylindrical cavity resonator for material processing (2022)
Journal Article

The development of an elliptical–cylindrical cavity for microwave thermal processing of materials at high electric field strengths is reported. The design methodology based on numerical modeling is validated by experimental measurements. The system c... Read More about S-band elliptical–cylindrical cavity resonator for material processing.

Simultaneous conventional and microwave heating for the synthesis of adsorbents for CO2 capture: Comparative study to pristine technologies (2022)
Journal Article

Microwave has become an attractive technology in the valorisation of renewable biomass and in the mitigation of challenges of climate change. In this work, the synergic effects of coupling microwave and mild conventional heating conditions has been i... Read More about Simultaneous conventional and microwave heating for the synthesis of adsorbents for CO2 capture: Comparative study to pristine technologies.

Thermal degradation kinetics of polyvinyl chloride in presence of zinc oxide (2021)
Journal Article

This work investigates the degradation kinetics and the pyrolysis behavior of Poly (vinyl chloride) (PVC) and its mixture with ZnO using thermogravimetric analysis under an inert atmosphere. The investigation was carried out due to the increased inte... Read More about Thermal degradation kinetics of polyvinyl chloride in presence of zinc oxide.

Leaching behavior of zinc and lead from electric arc furnace dust – Poly(vinyl) chloride residues after oxidative thermal treatment (2021)
Journal Article

Oxidative thermal treatment of electric arc furnace dust (EAFD) mixed with poly(vinyl) chloride (PVC) was carried out to study the impact of oxidizing environment on the extraction of valuable metals. The effect of oxygen partial pressure, temperatur... Read More about Leaching behavior of zinc and lead from electric arc furnace dust – Poly(vinyl) chloride residues after oxidative thermal treatment.

Microwave selective heating of electric arc furnace dust constituents toward sustainable recycling: Contribution of electric and magnetic fields (2021)
Journal Article

Microwave heating of waste electric arc furnace dust (EAFD) for the purpose of its remediation has been studied extensively. However, these studies considered EAFD as a bulk material without addressing either the relative response of its individual c... Read More about Microwave selective heating of electric arc furnace dust constituents toward sustainable recycling: Contribution of electric and magnetic fields.

Microwave digestion of gibbsite and bauxite in sodium hydroxide (2020)
Journal Article

It was hypothesized that bauxite digestion may be improved by using microwave heating as it has been shown in literature that some material processes have improved efficiency. To test this hypothesis, a set of digestion experiments were conducted usi... Read More about Microwave digestion of gibbsite and bauxite in sodium hydroxide.

Developing a sustainable route to environmentally relevant metal-organic frameworks: ultra-rapid synthesis of MFM-300(Al) using microwave heating (2019)
Journal Article

NO2, SO2 and CO2 are major air pollutants causing significant environmental and health problems. Metal-organic frameworks (MOFs), in particular [Al2(OH)2(C16O8H6)](H2O)6 (trivial names: NOTT-300/MFM-300(Al)), have shown great promise for capturing th... Read More about Developing a sustainable route to environmentally relevant metal-organic frameworks: ultra-rapid synthesis of MFM-300(Al) using microwave heating.

Formation of Metallurgical Coke within Minutes through Coal Densification and Microwave Energy (2019)
Journal Article

This paper shows how feedstock densification gives rise to a step change in the time required to create a metallurgical grade coke using microwave energy. Five densified coking and non-coking coals were heated in a multi-mode microwave 2450 MHz cavit... Read More about Formation of Metallurgical Coke within Minutes through Coal Densification and Microwave Energy.

Production of high purity silica by microfluidic-inclusion fracture using microwave pre-treatment (2018)
Journal Article

© 2018 Demand for high purity silica used in component manufacture is set to outstrip current supply in the near future. As such, alternative processing routes to feed-stock materials suitable for use in lighting and solar cell fabrication are requir... Read More about Production of high purity silica by microfluidic-inclusion fracture using microwave pre-treatment.

Removal of copper from cattle footbath wastewater with layered double hydroxide adsorbents as a route to antimicrobial resistance mitigation on dairy farms (2018)
Journal Article

Copper and zinc are routinely used in livestock antimicrobial footbaths in commercial farming. The footbath mix is a cost to farmers, and the disposal of spent footbath into slurry tanks leads to soil contamination, as well as the potential for antim... Read More about Removal of copper from cattle footbath wastewater with layered double hydroxide adsorbents as a route to antimicrobial resistance mitigation on dairy farms.

Combining continuous flow oscillatory baffled reactors and microwave heating: Process intensification and accelerated synthesis of metal-organic frameworks (2018)
Journal Article

We have constructed a continuous flow oscillatory baffled reactor (CF-OBR) equipped with a homogeneous and controllable microwave applicator in an entirely novel design. This affords a new route to chemical production incorporating many of the princi... Read More about Combining continuous flow oscillatory baffled reactors and microwave heating: Process intensification and accelerated synthesis of metal-organic frameworks.

Realising the environmental benefits of metal–organic frameworks: recent advances in microwave synthesis (2018)
Journal Article

Metal–organic frameworks (MOFs) are a broad class of porous crystalline materials that show great potential for a wide-range of applications in areas such as energy and environmental sustainability. MOFscan show significant advantages in gas selectiv... Read More about Realising the environmental benefits of metal–organic frameworks: recent advances in microwave synthesis.

Towards sustainable processing of columbite group minerals: Elucidating the relation between dielectric properties and physico-chemical transformations in the mineral phase (2017)
Journal Article

© 2017 The Author(s). Current methodologies for the extraction of tantalum and niobium pose a serious threat to human beings and the environment due to the use of hydrofluoric acid (HF). Niobium and tantalum metal powders and pentoxides are widely us... Read More about Towards sustainable processing of columbite group minerals: Elucidating the relation between dielectric properties and physico-chemical transformations in the mineral phase.