All Outputs (11)

Investigation of Exhaust Particles on Different TEM Grids: a Comparison between Graphene Oxide and Silicon Nitride Grids (2023)
Journal Article
Lagana, S., Akifjevs, R., Rocca, A. L., Cairns, A., Fay, M. W., & Webb, K. F. (2023). Investigation of Exhaust Particles on Different TEM Grids: a Comparison between Graphene Oxide and Silicon Nitride Grids. SAE Technical Papers, 2023-32-0123, https://doi.org/10.4271/2023-32-0123

Two different TEM (Transmission Electron Microscopy) grids - graphene oxide (GO) and silicon nitride (SiN) - were used to capture the particulates emitted with the exhaust of a modern 1.0 L GDI (Gasoline Direct Injection) engine. One speed-load condi... Read More about Investigation of Exhaust Particles on Different TEM Grids: a Comparison between Graphene Oxide and Silicon Nitride Grids.

Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction (2022)
Journal Article
Zou, T., Gerada, D., La Rocca, S., La Rocca, A., Walker, A., Vakil, G., …Gerada, C. (2023). Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction. IEEE Transactions on Industry Applications, 59(2), 1557-1570. https://doi.org/10.1109/TIA.2022.3225255

Synchronous reluctance (Syn-Rel) machines with embedded permanent magnets (PMs) are research hotspots in variable speed motor drives due to their robust rotor structure and wide constant power speed range (CPSR). In this paper, the potential of PM-as... Read More about Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction.

Mild hybridisation of turboprop engine with high-power-density integrated electric drives (2022)
Journal Article
Cossart, G., Chen, Y., Yang, T., Khowja, M., La Rocca, A., Nasir, U., …Wheeler, P. (2022). Mild hybridisation of turboprop engine with high-power-density integrated electric drives. IEEE Transactions on Transportation Electrification, 8(4), 4148-4162. https://doi.org/10.1109/TTE.2022.3160153

This paper shares with the aerospace community a case study of turboprop mild hybridisation using a recently developed integrated drive system in the University of Nottingham, UK, within the ACHIEVE project under EU H2020 CleanSky 2 program (project... Read More about Mild hybridisation of turboprop engine with high-power-density integrated electric drives.

A Comprehensive Design Guideline of Hairpin Windings for High Power Density Electric Vehicle Traction Motors (2022)
Journal Article
Zou, T., Gerada, D., La Rocca, A., Moslemin, M., Cairns, A., Cui, M., …Gerada, C. (2022). A Comprehensive Design Guideline of Hairpin Windings for High Power Density Electric Vehicle Traction Motors. IEEE Transactions on Transportation Electrification, 8(3), 3578-3593. https://doi.org/10.1109/TTE.2022.3149786

The rapidly increasing demand on power density levels of electric vehicle (EV) drive systems is pushing the boundaries of traction motor performance. Hairpin windings are becoming a popular option for EV motors due to their reduced DC losses and impr... Read More about A Comprehensive Design Guideline of Hairpin Windings for High Power Density Electric Vehicle Traction Motors.

Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation (2020)
Journal Article
Trentin, A., Sala, G., Tarisciotti, L., Galassini, A., Degano, M., Connor, P. H., …Gerada, C. (2021). Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation. IEEE Transactions on Industrial Electronics, 68(12), 11684-11695. https://doi.org/10.1109/TIE.2020.3040692

In this article, we describe the research and development of a 3 kV active rectifier for a 4 MW aerospace generator drive system demonstrator. The converter is fed by a multiphase high-speed/high-frequency permanent magnet generator. The main aim of... Read More about Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation.

Quantifying soot nanostructures: Importance of image processing parameters for lattice fringe analysis (2019)
Journal Article
Pfau, S. A., La Rocca, A., & Fay, M. W. (2020). Quantifying soot nanostructures: Importance of image processing parameters for lattice fringe analysis. Combustion and Flame, 211, 430-444. https://doi.org/10.1016/j.combustflame.2019.10.020

Fringe analysis is a commonly used method to quantify soot nanostructures. However, the settings of the involved filters and their impact on the results are rarely addressed. In this study, the influence of the three filter parameters as well as two... Read More about Quantifying soot nanostructures: Importance of image processing parameters for lattice fringe analysis.

Assessing the Accuracy of Soot Nanoparticle Morphology Measurements Using Three-Dimensional Electron Tomography (2019)
Journal Article
Haffner-Staton, E., La Rocca, A., Cairns, A., McGhee, M., & Fay, M. (2019). Assessing the Accuracy of Soot Nanoparticle Morphology Measurements Using Three-Dimensional Electron Tomography. SAE Technical Papers, 2019-April, Article 2019-01-1188. https://doi.org/10.4271/2019-01-1188

Morphology plays an important role in determining behaviour and impact of soot nanoparticles, including effect on human health, atmospheric optical properties, contribution to engine wear, and role in marine ecology. However, its nanoscopic size has... Read More about Assessing the Accuracy of Soot Nanoparticle Morphology Measurements Using Three-Dimensional Electron Tomography.

Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine? (2019)
Journal Article
Pfau, S. A., La Rocca, A., Haffner-Staton, E., Rance, G. A., Fay, M. W., & McGhee, M. (2019). Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine?. SAE Technical Papers, 2019-April, Article 2019-01-0301. https://doi.org/10.4271/2019-01-0301

Formation of soot is a known phenomenon for diesel engines, however, only recently emerged for gasoline engines with the introduction of direct injection systems. Soot-in-oil samples from a three-cylinder turbo-charged gasoline direct injection (GDI)... Read More about Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine?.

The initiation and development of combustion under cold idling conditions using a glow plug in diesel engines (2016)
Journal Article
Li, Q., Shayler, P. J., McGhee, M. J., & La Rocca, A. (2017). The initiation and development of combustion under cold idling conditions using a glow plug in diesel engines. International Journal of Engine Research, 18(3), 240-255. https://doi.org/10.1177/1468087416652266

Factors determining the success or failure of combustion initiation using a glow plug have been investigated through experimental work on a single cylinder, common rail diesel engine with a geometric compression ratio of 15.5, and a quiescent combust... Read More about The initiation and development of combustion under cold idling conditions using a glow plug in diesel engines.

Part-Load Particulate Matter from a GDI Engine and the Connection with Combustion Characteristics (2014)
Journal Article
Bonatesta, F., Chiappetta, E., & La Rocca, A. (2014). Part-Load Particulate Matter from a GDI Engine and the Connection with Combustion Characteristics. Applied Energy, 124(1), 366-376. https://doi.org/10.1016/j.apenergy.2014.03.030

The Gasoline Direct Injection engines are an important source of ultra-fine particulate matter. Significant research effort is still required as improved understanding of soot formation is critical in considering further development or adoption of ne... Read More about Part-Load Particulate Matter from a GDI Engine and the Connection with Combustion Characteristics.

Application of nanoparticle tracking analysis platform for the measurement of soot-in-oil agglomerates from automotive engines (2013)
Journal Article
La Rocca, A., Di Liberto, G., Shayler, P., Parmenter, C., & Fay, M. (2014). Application of nanoparticle tracking analysis platform for the measurement of soot-in-oil agglomerates from automotive engines. Tribology International, 70, 142-147. https://doi.org/10.1016/j.triboint.2013.09.018

Nanoparticle Tracking Analysis (NTA) has been applied to characterising soot agglomerates of particles and compared with Transmission Electron Microscoscopy (TEM). Soot nanoparticles were extracted from used oil drawn from the sump of a light duty au... Read More about Application of nanoparticle tracking analysis platform for the measurement of soot-in-oil agglomerates from automotive engines.