All Outputs (24)

Review of material measures for surface topography instrument calibration and performance verification (2023)
Journal Article

As the need for the manufacturing of complex surface topographies increases, traceable measurement with known uncertainties can allow a manufacturing process to remain stable. Material measures are the link in the chain that connects the surface topo... Read More about Review of material measures for surface topography instrument calibration and performance verification.

New Standard for Metal Powder Bed Fusion Surface Texture Measurement and Characterisation (2023)
Journal Article

As metal additive manufacturing has been increasingly accepted as a viable method of industrial manufacture, there has been a significant uptake in manufacturers wishing to verify and test their parts through analysis of part surface. However, variou... Read More about New Standard for Metal Powder Bed Fusion Surface Texture Measurement and Characterisation.

Stable large area drop-on-demand deposition of a conductive polymer ink for 3D-printed electronics, enabled by bio-renewable co-solvents (2023)
Journal Article

Development of conductive polymer ink formulations with reliable jetting stability and physical properties could offer sustainable routes for scaling-up the 3D-printing of electronics. We report a new poly(3,4-ethylenedioxythiophene) polystyrene sulp... Read More about Stable large area drop-on-demand deposition of a conductive polymer ink for 3D-printed electronics, enabled by bio-renewable co-solvents.

Applications of data fusion in optical coordinate metrology: a review (2022)
Journal Article

Data fusion enables the characterisation of an object using multiple datasets collected by various sensors. To improve optical coordinate measurement using data fusion, researchers have proposed numerous algorithmic solutions and methods. The most po... Read More about Applications of data fusion in optical coordinate metrology: a review.

Smart optical coordinate and surface metrology (2022)
Journal Article

Manufacturing has recently experienced increased adoption of optimised and fast solutions for checking product quality during fabrication, allowing for manufacturing times and costs to be significantly reduced. Due to the integration of machine learn... Read More about Smart optical coordinate and surface metrology.

Optical system for the measurement of the surface topography of additively manufactured parts (2022)
Journal Article

Additive manufacturing (AM) is now regularly used for customised fabrication of parts with complex shapes and geometries. However, the large range of relevant scales, high slopes, step-like transitions, undercuts, alternation between dark and overly... Read More about Optical system for the measurement of the surface topography of additively manufactured parts.

Optical metrology for digital manufacturing: a review (2022)
Journal Article

With the increasing adoption of Industry 4.0, optical metrology has experienced a significant boom in its implementation, as an ever-increasing number of manufacturing processes are overhauled for in-process measurement and control. As such, optical... Read More about Optical metrology for digital manufacturing: a review.

Efficient empirical determination of maximum permissible error in coordinate metrology (2021)
Journal Article

Maximum permissible errors (MPEs) are an important measurement system specification and form the basis of periodic verification of a measurement system's performance. However, there is no standard methodology for determining MPEs, so when they are no... Read More about Efficient empirical determination of maximum permissible error in coordinate metrology.

Multi-view fringe projection system for surface topography measurement during metal powder bed fusion (2020)
Journal Article

Metal powder bed fusion (PBF) methods need in-process measurement methods to increase user confidence and encourage further adoption in high-value manufacturing sectors. In this paper, a novel measurement method for PBF systems is proposed that uses... Read More about Multi-view fringe projection system for surface topography measurement during metal powder bed fusion.

Review of the influence of noise in X-ray computed tomography measurement uncertainty (2020)
Journal Article

Different aspects of noise in X-ray computed tomography (XCT) for industrial purposes are examined. An overview of the most common noise metrics is given, together with a description of XCT noise influence quantities. We address the current state of... Read More about Review of the influence of noise in X-ray computed tomography measurement uncertainty.

Ceria-coated replicated aluminium sponges as catalysts for the CO-water gas shift process (2020)
Journal Article

A study on the use of chemical conversion coating as a preparative technique for foam-based structured catalysts, in the water gas shift reaction, is presented. The results showed a significant correlation between the textural properties of the struc... Read More about Ceria-coated replicated aluminium sponges as catalysts for the CO-water gas shift process.

Metrological characteristics for the calibration of surface topography measuring instruments: a review (2020)
Journal Article

In this paper, we will review the development and use of an ISO standardised framework to allow calibration of surface topography measuring instruments. We will draw on previous work to present the state of the art in the field in terms of employed m... Read More about Metrological characteristics for the calibration of surface topography measuring instruments: a review.

Polymer powder bed fusion surface texture measurement (2020)
Journal Article

Polymer laser powder bed fusion (LPBF) surfaces can be challenging to measure. These surfaces comprise complex features including undercuts, deep recesses, step-like transitions, a large range of measurement scales and unfavourable optically material... Read More about Polymer powder bed fusion surface texture measurement.

Design and characterisation of an additive manufacturing benchmarking artefact following a design-for-metrology approach (2019)
Journal Article

We present the design and characterisation of a high-speed sintering additive manufacturing benchmarking artefact following a design-for-metrology approach. In an important improvement over conventional approaches, the specifications and operating pr... Read More about Design and characterisation of an additive manufacturing benchmarking artefact following a design-for-metrology approach.

An interlaboratory comparison of X-ray computed tomography measurement for texture and dimensional characterisation of additively manufactured parts (2018)
Journal Article

This paper presents the results of the CT-STARR (CT-Surface Texture for Additive Round Robin) Stage 1 interlaboratory comparison. The study compared the results obtained for the extraction of areal surface texture data per ISO 25178-2 from five X-ray... Read More about An interlaboratory comparison of X-ray computed tomography measurement for texture and dimensional characterisation of additively manufactured parts.

Effects of magnification and sampling resolution in X-ray computed tomography for the measurement of additively manufactured metal surfaces (2018)
Journal Article

Recent studies have shown that X-ray computed tomography (XCT) can be used to measure the surface topography of additively manufactured parts. However, further research is necessary to fully understand XCT measurement performance. Here, we show how m... Read More about Effects of magnification and sampling resolution in X-ray computed tomography for the measurement of additively manufactured metal surfaces.

Internal surface measurement of metal powder bed fusion parts (2018)
Journal Article

Recent advances in X-ray computed tomography (XCT) have allowed for measurement resolutions approaching the point where XCT can be used for measuring surface topography. These advances make XCT appealing for measuring hard-to-reach or internal surfac... Read More about Internal surface measurement of metal powder bed fusion parts.

Feature-based characterisation of signature topography in laser powder bed fusion of metals (2017)
Journal Article

The use of state-of-the-art areal topography measurement instrumentation allows for a high level of detail in the acquisition of topographic information at micrometric scales. The three-dimensional geometric models of surface topography obtained from... Read More about Feature-based characterisation of signature topography in laser powder bed fusion of metals.

Characterisation of the topography of metal additive surface features with different measurement technologies (2017)
Journal Article

© 2017 IOP Publishing Ltd. The challenges of measuring the surface topography of metallic surfaces produced by additive manufacturing are investigated. The differences between measurements made using various optical and non-optical technologies, incl... Read More about Characterisation of the topography of metal additive surface features with different measurement technologies.

Staged thermomechanical testing of nickel superalloys produced by selective laser melting (2017)
Journal Article

The creep performance of additively manufactured components remains an issue before additive manufacturing can be put fully implemented. In this study, Inconel 718 two-bar specimens are produced by selective laser melting and subjected to a ‘staged’... Read More about Staged thermomechanical testing of nickel superalloys produced by selective laser melting.