Skip to main content

Research Repository

Advanced Search

Outputs (28)

Glycerol-based sustainably sourced resin for volumetric printing (2024)
Journal Article
Krumins, E., Lentz, J. C., Sutcliffe, B., Sohaib, A., Jacob, P. L., Brugnoli, B., …Taresco, V. (2024). Glycerol-based sustainably sourced resin for volumetric printing. Green Chemistry, 26(3), 1345-1355. https://doi.org/10.1039/d3gc03607c

Volumetric Additive Manufacturing (VAM) represents a revolutionary advancement in the field of Additive Manufacturing, as it allows for the creation of objects in a single, cohesive process, rather than in a layer-by-layer approach. This innovative t... Read More about Glycerol-based sustainably sourced resin for volumetric printing.

Preventing thermal osteonecrosis through 3D printed ceramic grinding tool (2023)
Journal Article
Wang, B., Zhao, Y., Liu, G., Thein, C. K., Su, W., Long, S., …Li, H. N. (2023). Preventing thermal osteonecrosis through 3D printed ceramic grinding tool. Additive Manufacturing, 78, Article 103878. https://doi.org/10.1016/j.addma.2023.103878

Conventional grinding tools in orthopedic surgery and neurosurgery are solid in structure, leading to a limited amount of coolant that can reach the bone surgery zone, and therefore causing localized high-temperature-induced issues (infection, necros... Read More about Preventing thermal osteonecrosis through 3D printed ceramic grinding tool.

Formulation of functional materials for inkjet printing: A pathway towards fully 3D printed electronics (2023)
Journal Article
Bastola, A., He, Y., Im, J., Rivers, G., Wang, F., Worsley, R., …Turyanska, L. (2023). Formulation of functional materials for inkjet printing: A pathway towards fully 3D printed electronics. Materials Today Electronics, 6, Article 100058. https://doi.org/10.1016/j.mtelec.2023.100058

Inkjet printing offers a facile route for manufacturing the next generation of electronic devices, by combining the design freedom of additive manufacturing technologies with tuneable properties of functional materials and opportunities for their int... Read More about Formulation of functional materials for inkjet printing: A pathway towards fully 3D printed electronics.

Stable large area drop-on-demand deposition of a conductive polymer ink for 3D-printed electronics, enabled by bio-renewable co-solvents (2023)
Journal Article
Rivers, G., Austin, J. S., He, Y., Thompson, A., Gilani, N., Roberts, N., …Turyanska, L. (2023). Stable large area drop-on-demand deposition of a conductive polymer ink for 3D-printed electronics, enabled by bio-renewable co-solvents. Additive Manufacturing, 66, Article 103452. https://doi.org/10.1016/j.addma.2023.103452

Development of conductive polymer ink formulations with reliable jetting stability and physical properties could offer sustainable routes for scaling-up the 3D-printing of electronics. We report a new poly(3,4-ethylenedioxythiophene) polystyrene sulp... Read More about Stable large area drop-on-demand deposition of a conductive polymer ink for 3D-printed electronics, enabled by bio-renewable co-solvents.

Strategies for Integrating Metal Nanoparticles with Two-Photon Polymerization Process: Toward High Resolution Functional Additive Manufacturing (2023)
Journal Article
Im, J., Liu, Y., Hu, Q., Trindade, G. F., Parmenter, C., Fay, M., …Turyanska, L. (2023). Strategies for Integrating Metal Nanoparticles with Two-Photon Polymerization Process: Toward High Resolution Functional Additive Manufacturing. Advanced Functional Materials, 33(39), Article 2211920. https://doi.org/10.1002/adfm.202211920

This study reports the successful fabrication of complex 3D metal nanoparticle–polymer nanocomposites using two-photon polymerization (2PP). Three complementary strategies are detailed: in situ formation of metal nanoparticles (MeNPs) through a singl... Read More about Strategies for Integrating Metal Nanoparticles with Two-Photon Polymerization Process: Toward High Resolution Functional Additive Manufacturing.

The impact of the risk of build failure on energy consumption in additive manufacturing (2022)
Journal Article
Wang, H., Baumers, M., Basak, S., He, Y., & Ashcroft, I. (2022). The impact of the risk of build failure on energy consumption in additive manufacturing. Journal of Industrial Ecology, 26(5), 1771-1783. https://doi.org/10.1111/jiec.13318

Additive manufacturing (AM), also known as 3D printing, is associated with significant promise in the manufacturing sector. However, it has been shown that the risk of build failure has a substantial impact on the costs of AM and that this results fr... Read More about The impact of the risk of build failure on energy consumption in additive manufacturing.

Correction to “Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers” (2022)
Journal Article
Ruiz-Cantu, L., Trindade, G. F., Taresco, V., Zhou, Z., He, Y., Burroughs, L., …Wildman, R. D. (2022). Correction to “Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers”. ACS Applied Materials and Interfaces, 14(6), 8654. https://doi.org/10.1021/acsami.2c00035

The chemical structure of the drug trandolapril has been corrected in Figure 4c. The conclusions of the work have not been affected by this correction. (Figure present).

Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices (2021)
Journal Article
He, Y., Luckett, J., Begines, B., Dubern, J. F., Hook, A. L., Prina, E., …Wildman, R. D. (2022). Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices. Biomaterials, 281, Article 121350. https://doi.org/10.1016/j.biomaterials.2021.121350

Chronic infection as a result of bacterial biofilm formation on implanted medical devices is a major global healthcare problem requiring new biocompatible, biofilm-resistant materials. Here we demonstrate how bespoke devices can be manufactured throu... Read More about Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices.

Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers (2021)
Journal Article
Ruiz-Cantu, L., Trindade, G. F., Taresco, V., Zhou, Z., He, Y., Burroughs, L., …Wildman, R. D. (2021). Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers. ACS Applied Materials and Interfaces, 13(33), 38969-38978. https://doi.org/10.1021/acsami.1c07850

Controlling the microstructure of materials by means of phase separation is a versatile tool for optimizing material properties. Phase separation has been exploited to fabricate intricate microstructures in many fields including cell biology, tissue... Read More about Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers.

Modelling the influence of UV curing strategies for optimisation of inkjet based 3D printing (2021)
Journal Article
Zhao, P., He, Y., Trindade, G. F., Baumers, M., Irvine, D., Hague, R., …Wildman Conceptualisation, R. (2021). Modelling the influence of UV curing strategies for optimisation of inkjet based 3D printing. Materials and Design, 208, Article 109889. https://doi.org/10.1016/j.matdes.2021.109889

A predictive model is developed to assist in the design and manufacture of structures by inkjet based 3D printing (IJ3DP)/additive manufacturing. IJ3DP often exploits photopolymerisation to rapidly convert a photoreactive liquid ink into a solid prod... Read More about Modelling the influence of UV curing strategies for optimisation of inkjet based 3D printing.

Poly (glycerol adipate) (PGA) backbone modifications with a library of functional diols: Chemical and physical effects (2021)
Journal Article
Jacob, P. L., Ruiz Cantu, L. A., Pearce, A. K., He, Y., Lentz, J. C., Moore, J. C., …Taresco, V. (2021). Poly (glycerol adipate) (PGA) backbone modifications with a library of functional diols: Chemical and physical effects. Polymer, 228, Article 123912. https://doi.org/10.1016/j.polymer.2021.123912

Enzymatically synthesised poly(glycerol adipate) (PGA) has shown a palette of key desirable properties required for a biomaterial to be considered a ‘versatile polymeric tool’ in the field of drug delivery. PGA and its variations can self-assemble in... Read More about Poly (glycerol adipate) (PGA) backbone modifications with a library of functional diols: Chemical and physical effects.

Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices (2021)
Journal Article
He, Y., Abdi, M., Trindade, G. F., Begines, B., Dubern, J. F., Prina, E., …Wildman, R. D. (2021). Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices. Advanced Science, 8(15), Article 2100249. https://doi.org/10.1002/advs.202100249

As the understanding of disease grows, so does the opportunity for personalization of therapies targeted to the needs of the individual. To bring about a step change in the personalization of medical devices it is shown that multi-material inkjet-bas... Read More about Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices.

Residual polymer stabiliser causes anisotropic electrical conductivity during inkjet printing of metal nanoparticles (2021)
Journal Article
Trindade, G. F., Wang, F., Im, J., He, Y., Balogh, A., Scurr, D., …Roberts, C. J. (2021). Residual polymer stabiliser causes anisotropic electrical conductivity during inkjet printing of metal nanoparticles. Communications Materials, 2(1), Article 47. https://doi.org/10.1038/s43246-021-00151-0

Inkjet printing of metal nanoparticles allows for design flexibility, rapid processing and enables the 3D printing of functional electronic devices through co-deposition of multiple materials. However, the performance of printed devices, especially t... Read More about Residual polymer stabiliser causes anisotropic electrical conductivity during inkjet printing of metal nanoparticles.

Inkjet 3D Printing of Polymers Resistant to Fungal Attachment (2021)
Journal Article
He, Y., Vallières, C., Alexander, M. R., Wildman, R. D., & Avery, S. V. (2021). Inkjet 3D Printing of Polymers Resistant to Fungal Attachment. Bio-protocol, 11(9), Article e4016. https://doi.org/10.21769/BioProtoc.4016

Inkjet 3D printing is an additive manufacturing method that allows the user to produce a small batch of customized devices for comparative study versus commercial products. Here, we describe the use of a commercial 2D ink development system (Dimatix... Read More about Inkjet 3D Printing of Polymers Resistant to Fungal Attachment.

Discovery of (meth)acrylate polymers that resist colonization by fungi associated with pathogenesis and biodeterioration (2020)
Journal Article
Vallieres, C., Hook, A. L., He, Y., Crucitti, V. C., Figueredo, G., Davies, C. R., …Avery, S. V. (2020). Discovery of (meth)acrylate polymers that resist colonization by fungi associated with pathogenesis and biodeterioration. Science Advances, 6(23), Article eaba6574. https://doi.org/10.1126/sciadv.aba6574

© 2020 The Authors. Fungi have major, negative socioeconomic impacts, but control with bioactive agents is increasingly restricted, while resistance is growing. Here, we describe an alternative fungal control strategy via materials operating passivel... Read More about Discovery of (meth)acrylate polymers that resist colonization by fungi associated with pathogenesis and biodeterioration.

A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants (2020)
Journal Article
He, Y., Foralosso, R., Ferraz Trindade, G., Ilchev, A., Cantu, L. R., Clark, E., …Wildman, R. D. (2020). A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants. Advanced Therapeutics, 3(6), Article 1900187. https://doi.org/10.1002/adtp.201900187

We propose a strategy for creating tuneable 3D printed drug delivery devices. 3D printing offers the opportunity for improved compliance and patient treatment outcomes through personalisation, but bottlenecks include finding formulations that provide... Read More about A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants.

Design of highly stabilized nanocomposite inks based on biodegradable polymer-matrix and gold nanoparticles for Inkjet Printing (2019)
Journal Article
Begines, B., Alcudia, A., Aguilera-Velazquez, R., Martinez, G., He, Y., Wildman, R., …Prado-Gotor, R. (2019). Design of highly stabilized nanocomposite inks based on biodegradable polymer-matrix and gold nanoparticles for Inkjet Printing. Scientific Reports, 9, Article 16097. https://doi.org/10.1038/s41598-019-52314-2

Nowadays there is a worldwide growing interest in the Inkjet Printing technology owing to its potentially high levels of geometrical complexity, personalization and resolution. There is also social concern about usage, disposal and accumulation of pl... Read More about Design of highly stabilized nanocomposite inks based on biodegradable polymer-matrix and gold nanoparticles for Inkjet Printing.

Reactive material jetting of polyimide insulators for complex circuit board design (2018)
Journal Article
Zhang, F., Saleh, E., Vaithilingam, J., Li, Y., Tuck, C., Hague, R., …He, Y. (2019). Reactive material jetting of polyimide insulators for complex circuit board design. Additive Manufacturing, 25, 477-484. https://doi.org/10.1016/j.addma.2018.11.017

Polyimides are a group of high performance thermal stable dielectric materials used in diverse applications. In this article, we synthesized and developed a high-performance polyimide precursor ink for a Material Jetting (MJ) process. The proposed in... Read More about Reactive material jetting of polyimide insulators for complex circuit board design.

Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction (2018)
Journal Article
Hu, Q., Sun, X., Parmenter, C. D. J., Fay, M. W., Smith, E. F., Rance, G. A., …Wildman, R. (2018). Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Scientific Reports, 8(1), Article 3512. https://doi.org/10.1038/s41598-018-21513-8

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction (2017)
Journal Article
Parmenter, C. D. J., Hu, Q., Sun, X. Z., Parmenter, C. D., Fay, M. W., Smith, E. F., …Wildman, R. (2017). Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Scientific Reports, 7(1), Article 17150. https://doi.org/10.1038/s41598-017-17391-1

© 2017 The Author(s). The fabrication of complex three-dimensional gold-containing nanocomposite structures by simultaneous two-photon polymerisation and photoreduction is demonstrated. Increased salt delivers reduced feature sizes down to line width... Read More about Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction.

3D inkjet printing of electronics using UV conversion (2017)
Journal Article
Saleh, E., Zhang, F., He, Y., Vaithilingam, J., Fernandez, J. L., Wildman, R. D., …Tuck, C. (2017). 3D inkjet printing of electronics using UV conversion. Advanced Materials Technologies, 2(10), Article 1700134. https://doi.org/10.1002/admt.201700134

The production of electronic circuits and devices is limited by current manufacturing methods that limit both the form and potentially the performance of these systems. Additive Manufacturing (AM) is a technology that has been shown to provide cross... Read More about 3D inkjet printing of electronics using UV conversion.

Multi-branched benzylidene ketone based photoinitiators for multiphoton fabrication (2017)
Journal Article
Zhang, F., Hu, Q., Castanon, A., He, Y., Liu, Y., Paul, B., …Wildman, R. D. (2017). Multi-branched benzylidene ketone based photoinitiators for multiphoton fabrication. Additive Manufacturing, 16, 206-212. https://doi.org/10.1016/j.addma.2017.06.008

In this article, we report the synthesis of a series of multi-branched benzylidene (BI) ketone-based photo-initiators for two-photon polymerisation based 3D printing/additive manufacturing. Resins prepared by the addition of 1 wt.% of these initiator... Read More about Multi-branched benzylidene ketone based photoinitiators for multiphoton fabrication.

A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting (2017)
Journal Article
Aboulkhair, N., He, Y., Zhang, F., Saleh, E., Vaithilingam, J., Aboulkhair, N. T., …Wildman, R. D. (2017). A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting. Additive Manufacturing, 16, 153-161. https://doi.org/10.1016/j.addma.2017.06.001

© 2017 Support structures and materials are indispensable components in many Additive Manufacturing (AM) systems in order to fabricate complex 3D structures. For inkjet-based AM techniques (known as Material Jetting), there is a paucity of studies o... Read More about A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting.

Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication (2016)
Journal Article
Liu, Y., Hu, Q., Zhang, F., Tuck, C., Irvine, D., Hague, R. J., …Wildman, R. D. (2016). Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication. Polymers, 8(9), 1-14. https://doi.org/10.3390/polym8090325

Three dimensional structures prepared from a gold-polymer composite formulation have been fabricated using multiphoton lithography. In this process, gold nanoparticles were simultaneously formed through photoreduction whilst polymerisation of two pos... Read More about Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication.

A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing (2016)
Journal Article
He, Y., Tuck, C., Prina, E., Kilsby, S., Christie, S. D., Edmondson, S., …Wildman, R. D. (2017). A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105(6), 1645-1657. https://doi.org/10.1002/jbm.b.33699

A new type of photocrosslinkable polycaprolactone (PCL)-based ink that is suitable for three-dimensional (3D) inkjet printing has been developed. Photocrosslinkable PCL dimethylacrylate was synthesized and mixed with poly(ethylene glycol) diacrylate... Read More about A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing.

Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications (2016)
Journal Article
Zhang, F., Tuck, C., Hague, R. J., He, Y., Saleh, E., Li, Y., …Wildman, R. D. (2016). Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications. Journal of Applied Polymer Science, https://doi.org/10.1002/APP.43361

In this article, we report the first continuous fabrication of inkjet-printed polyimide films, which were used as insulating layers for the production of capacitors. The polyimide ink was prepared from its precursor poly(amic) acid, and directly prin... Read More about Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications.

Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents (2016)
Journal Article
Gunasekera, D. H., Kuek, S., Hasanaj, D., He, Y., Tuck, C., Croft, A. K., & Wildman, R. D. (2016). Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents. Faraday Discussions, 190, 509-523. https://doi.org/10.1039/C5FD00219B

1-Ethyl-3-methylimidazolium acetate ([C2C1Im][OAc]) and 1-butyl-3-methylimidazolium acetate ([C4C1Im][OAc]) have been used as solvents for the dissolution and ink-jet printing of cellulose from 1.0 to 4.8 wt%, mixed with the co-solvents 1-butanol and... Read More about Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents.