All Outputs (5419)

Coupled centrifuge-numerical modelling of shallow strip foundations (2024)
Presentation / Conference
Tang, C., Selvaraj, S. P., Heron, C. M., & Marshall, A. M. (2024, June). Coupled centrifuge-numerical modelling of shallow strip foundations. Paper presented at IS-Macau 2024: 11th International Symposium of Geotechnical Aspects of Underground Construction in Soft Ground, Macau, SOR, China

Hybrid modelling within geotechnical centrifuge tests is capable of combining the advantages of centrifuge models (providing soil stress/deformation data) with those of numerical models (capturing structural details along with associated load distrib... Read More about Coupled centrifuge-numerical modelling of shallow strip foundations.

Enabling high-fidelity personalised pharmaceutical tablets through multimaterial inkjet 3D printing with a water-soluble excipient (2024)
Journal Article
Rivers, G., Lion, A., Putri, N. R. E., Rance, G. A., Moloney, C., Taresco, V., …He, Y. (2024). Enabling high-fidelity personalised pharmaceutical tablets through multimaterial inkjet 3D printing with a water-soluble excipient. Materials Today Advances, 22, Article 100493. https://doi.org/10.1016/j.mtadv.2024.100493

Additive manufacturing offers manufacture of personalised pharmaceutical tablets through design freedoms and material deposition control at an individual voxel level. This control goes beyond geometry and materials choices: inkjet based 3D printing e... Read More about Enabling high-fidelity personalised pharmaceutical tablets through multimaterial inkjet 3D printing with a water-soluble excipient.

Characterisation of process-induced variability in wrinkle defects during double diaphragm forming of non-crimp fabric (2024)
Journal Article
Codolini, A., Chen, S., Lawrence, G. D., Harper, L. T., & Sutcliffe, M. P. F. (in press). Characterisation of process-induced variability in wrinkle defects during double diaphragm forming of non-crimp fabric. Composites Part B: Engineering,

Experiments and numerical simulations are employed to determine the critical process variables that affect the quality of a two-layer biaxial non-crimp fabric (NCF) preformed using the double diaphragm forming (DDF) process. To prevent wrinkling defe... Read More about Characterisation of process-induced variability in wrinkle defects during double diaphragm forming of non-crimp fabric.

Fluid-rock interaction experiments with andesite at 100°C for potential carbon storage in geothermal reservoirs (2024)
Journal Article
Belshaw, G. E., Steer, E., Ji, Y., Azis, H., Sapiie, B., Muljadi, B., & Vandeginste, V. (2024). Fluid-rock interaction experiments with andesite at 100°C for potential carbon storage in geothermal reservoirs. Deep Underground Science and Engineering, https://doi.org/10.1002/dug2.12097

Geothermal energy extraction often results in the release of naturally occurring carbon dioxide (CO2) as a byproduct. Research on carbon storage using volcanic rock types other than basalt under both acidic and elevated temperature conditions has bee... Read More about Fluid-rock interaction experiments with andesite at 100°C for potential carbon storage in geothermal reservoirs.

Effect of textile density and number of layers on the flexural behaviour of RC beams strengthened with steel reinforced grout systems (2024)
Journal Article
Alotaibi, S., Thermou, G., Hajirasouliha, I., & Guadagnini, M. (2024). Effect of textile density and number of layers on the flexural behaviour of RC beams strengthened with steel reinforced grout systems. Construction and Building Materials, 430, Article 136424. https://doi.org/10.1016/j.conbuildmat.2024.136424

This paper presents the results of an experimental investigation on the flexural behaviour of reinforced concrete (RC) beams strengthened with multi-layer Steel Reinforced Grout (SRG) systems. The effect of textile density (4 and 8 cords/in) and numb... Read More about Effect of textile density and number of layers on the flexural behaviour of RC beams strengthened with steel reinforced grout systems.

Multiple drug-delivery strategies to enhance the pharmacological and toxicological properties of Mefenamic acid (2024)
Journal Article
Cristiano, C., Cavanagh, R. J., Cuzzucoli Crucitti, V., Moloney, C., Axioti, E., Dixon, E., …Rimoli, M. G. (2024). Multiple drug-delivery strategies to enhance the pharmacological and toxicological properties of Mefenamic acid. Biomedicine and Pharmacotherapy, 175, Article 116647. https://doi.org/10.1016/j.biopha.2024.116647

Objective To improve the biological and toxicological properties of Mefenamic acid (MA), the galactosylated prodrug of MA named MefeGAL was included in polymeric solid dispersions (PSs) composed of poly(glycerol adipate) (PGA) and Pluronic® F68 (M... Read More about Multiple drug-delivery strategies to enhance the pharmacological and toxicological properties of Mefenamic acid.

Microwave thermal pre-treatment and calcination of biomineralised sorbents for calcium looping (2024)
Journal Article
Erans, M., Durán-Jimenez, G., M. Rodríguez, J., Stevens, L., & Dodds, C. (2024). Microwave thermal pre-treatment and calcination of biomineralised sorbents for calcium looping. Journal of Co2 Utilization, 83, Article 102794. https://doi.org/10.1016/j.jcou.2024.102794

Waste eggshells have been investigated as biomineralised CO2 sorbents for the calcium looping cycle due to their high Ca content, low cost, availability, and high CO2 uptake. This work investigates a novel heat-pre-treatment using eggshells as raw ma... Read More about Microwave thermal pre-treatment and calcination of biomineralised sorbents for calcium looping.

Simultaneous geraniol and citronellol transesterification using Pseudomonas fluorescens lipase for the production of fragrance and flavour esters: a kinetic study (2024)
Journal Article
Wikaputri, A. S., Irvine, D. J., Stockman, R. A., & Shivaprasad, P. (2024). Simultaneous geraniol and citronellol transesterification using Pseudomonas fluorescens lipase for the production of fragrance and flavour esters: a kinetic study. Journal of Agriculture and Food Research, 16, Article 101186. https://doi.org/10.1016/j.jafr.2024.101186

This study aims to develop, for the very first time, a kinetic model for the simultaneous transesterification of geraniol and citronellol using Pseudomonas fluorescens lipase to produce their respective esters. This allows us to test the feasibility... Read More about Simultaneous geraniol and citronellol transesterification using Pseudomonas fluorescens lipase for the production of fragrance and flavour esters: a kinetic study.

Numerical investigation of bubble dynamics and flow boiling heat transfer in cylindrical micro-pin-fin heat exchangers (2024)
Journal Article
El Mellas, I., Samkhaniani, N., Falsetti, C., Stroh, A., Icardi, M., & Magnini, M. (2024). Numerical investigation of bubble dynamics and flow boiling heat transfer in cylindrical micro-pin-fin heat exchangers. International Journal of Heat and Mass Transfer, 228, Article 125620. https://doi.org/10.1016/j.ijheatmasstransfer.2024.125620

Micro-pin-fin evaporators are a promising alternative to multi-microchannel heat sinks for two-phase cooling of high power-density devices. Within pin-fin evaporators, the refrigerant flows through arrays of obstacles in cross-flow and is not restric... Read More about Numerical investigation of bubble dynamics and flow boiling heat transfer in cylindrical micro-pin-fin heat exchangers.

Optimizing Printing Fidelity Of The Single-Nozzle Based Multimaterial Direct Ink Writing For 3D Food Printing (2024)
Journal Article
Tian, Z., Zhong, Q., Zhang, H., Yin, T., Zhao, J., Liu, G., …He, Y. (in press). Optimizing Printing Fidelity Of The Single-Nozzle Based Multimaterial Direct Ink Writing For 3D Food Printing. Virtual and Physical Prototyping,

Defining human-centricity in Industry 5.0 and assessing the readiness of Ergonomics/Human Factors communities in UK (2024)
Journal Article
Hermawati, S., Correa, R., Mohan, M., Lawson, G., & Houghton, R. (2024). Defining human-centricity in Industry 5.0 and assessing the readiness of Ergonomics/Human Factors communities in UK. Ergonomics, https://doi.org/10.1080/00140139.2024.2343947

There is a lack of a clear and consistent definition of human-centricity in Industry 5.0. This study identified the definition of human-centricity in Industry 5.0 through a systematic literature review and used it to assess the readiness of Ergonomic... Read More about Defining human-centricity in Industry 5.0 and assessing the readiness of Ergonomics/Human Factors communities in UK.

Active noise control by means of high frequency injection in electric motors (2024)
Journal Article
Skoulaxinos, S., Wheeler, P., & Vakil, G. (in press). Active noise control by means of high frequency injection in electric motors. IET Electric Power Applications, https://doi.org/10.1049/elp2.12442

Machine acoustics is an important area of research impacting the quality and comfort of human life. With increased levels of electrification and the wider use of electric motors, the contribution of motor drives towards quieter acoustic systems becom... Read More about Active noise control by means of high frequency injection in electric motors.

A Review of Carbon Emissions from Electrical Machine Materials (2024)
Journal Article
Zhang, X., Gerada, D., Xu, Z., Zhang, F., & Gerada, C. (2024). A Review of Carbon Emissions from Electrical Machine Materials. Electronics, 13(9), Article 1714. https://doi.org/10.3390/electronics13091714

As the world embarks on a global mission to tackle climate change, reducing carbon represents a key challenge given the escalating global warming. The U.K. is among many other nations that are determined to decarbonise all sectors and strive to achie... Read More about A Review of Carbon Emissions from Electrical Machine Materials.

Performance improvement of the automotive thermoelectric generator by extending the hot side area of the heat exchanger through heat pipes (2024)
Journal Article
Luo, D., Yang, S., Yan, Y., Cao, J., & Cao, B. (2024). Performance improvement of the automotive thermoelectric generator by extending the hot side area of the heat exchanger through heat pipes. Energy Conversion and Management, 310, Article 118472. https://doi.org/10.1016/j.enconman.2024.118472

In pursuit of enhancing the utilization of exhaust heat in the automotive thermoelectric generator (ATEG), this study introduces a novel heat exchanger with integrated heat pipes to extend the effective hot-side surface area. Meanwhile, a numerical m... Read More about Performance improvement of the automotive thermoelectric generator by extending the hot side area of the heat exchanger through heat pipes.

Modeling and study of pressure-dependent boiling crisis in membrane-based heat sink (2024)
Journal Article
Fu, R., Chen, C., Yan, Y., Wang, Q., & Cao, L. (2024). Modeling and study of pressure-dependent boiling crisis in membrane-based heat sink. International Journal of Heat and Mass Transfer, 228, Article 125613. https://doi.org/10.1016/j.ijheatmasstransfer.2024.125613

A theoretical model is developed to study the pressure-dependent boiling crisis of membrane-based heat sink. It has been reported that the critical heat flux of this heat sink can be increased to 1.8 kW/cm2 by using a piece of hydrophobic membrane to... Read More about Modeling and study of pressure-dependent boiling crisis in membrane-based heat sink.

Micro-mechanical behavior of stone-blowing in ballast maintenance using DEM-CFD coupling method (2024)
Journal Article
Chen, C., Rao, W., Zhang, L., McDowell, G., & Li, P. (2024). Micro-mechanical behavior of stone-blowing in ballast maintenance using DEM-CFD coupling method. Transportation Geotechnics, 46, Article 101263. https://doi.org/10.1016/j.trgeo.2024.101263

Stone-blowing restores the track geometry by blowing small crushed stones into the bottom of the sleeper, extending the maintenance period. In this study, ballast and filling stones were modelled using discrete element method (DEM), while the air blo... Read More about Micro-mechanical behavior of stone-blowing in ballast maintenance using DEM-CFD coupling method.

Population infection estimation from wastewater surveillance for SARS-CoV-2 in Nagpur, India during the second pandemic wave (2024)
Journal Article
Acheampong, E., Husain, A. A., Dudani, H., Nayak, A. R., Nag, A., Meena, E., …Monaghan, T. M. (in press). Population infection estimation from wastewater surveillance for SARS-CoV-2 in Nagpur, India during the second pandemic wave. PLoS ONE,

Wastewater-based epidemiology (WBE) has emerged as an effective environmental surveillance tool for predicting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) disease outbreaks in high-income countries (HICs) with centralized sewage infr... Read More about Population infection estimation from wastewater surveillance for SARS-CoV-2 in Nagpur, India during the second pandemic wave.

Effect of infill nonlinearity on frame response to tunnelling (2024)
Conference Proceeding
Yu, Y., Franza, A., Neves, L., & Marshall, A. M. (in press). Effect of infill nonlinearity on frame response to tunnelling.

Tunnel construction is needed for infrastructure development in urban areas. However, underground excavation can detrimentally influence adjacent buildings; in particular , for framed structures with shallow foundations, damage would localise in the... Read More about Effect of infill nonlinearity on frame response to tunnelling.

Status and Progress of Nanomaterials Application in Hydrogen Storage (2024)
Book Chapter
Güleç, F., Oakley, W., Liu, X., Nayebossadri, S., Wang, F., K. Smith, E., …Lester, E. H. (2024). Status and Progress of Nanomaterials Application in Hydrogen Storage. In J. A. Okolie, E. I. Epelle, A. Mukherjee, & A. El Din Mahmoud (Eds.), Nanomaterials for Sustainable Hydrogen Production and Storage (136-165). CRC Press. https://doi.org/10.1201/9781003371007-8

Hydrogen could be one of the long-term environmentally friendly solutions for a sustainable and clean energy future. The fundamental elements of a hydrogen economy are sustainable and clean hydrogen production, low-cost/high-capacity storage, wide di... Read More about Status and Progress of Nanomaterials Application in Hydrogen Storage.

Deconvoluting the Mechanisms of Thermal Degradation and Oxidation during the Aging Simulation of Elastomeric Modified Asphalt Binders (2024)
Journal Article
Adwani, D., Sreeram, A., & Bhasin, A. (2024). Deconvoluting the Mechanisms of Thermal Degradation and Oxidation during the Aging Simulation of Elastomeric Modified Asphalt Binders. Journal of Materials in Civil Engineering, 36(7), https://doi.org/10.1061/jmcee7.mteng-17450

Developing new and efficient methods to simulate the aging of asphalt binders and mixtures continues to be an important area of research for the asphalt community around the world. Temperatures exceeding pavement service temperatures are typically us... Read More about Deconvoluting the Mechanisms of Thermal Degradation and Oxidation during the Aging Simulation of Elastomeric Modified Asphalt Binders.