All Outputs (374)

An Improved Multistage Switched Inductor Boost Converter (Improved M-SIBC) for Renewable Energy Applications: A key to Enhance Conversion Ratio (2018)
Conference Proceeding

In this article, an improved Multistage Switched Inductor (M-SI) based power converter or Improved Multistage Switched Inductor Boost Converter (Improved M-SIBC) is proposed for renewable applications which provides a key to enhancing the voltage con... Read More about An Improved Multistage Switched Inductor Boost Converter (Improved M-SIBC) for Renewable Energy Applications: A key to Enhance Conversion Ratio.

Developing GDPR Compliant Apps For The Edge (2018)
Conference Proceeding

We present an overview of the Databox application devel- opment environment or SDK as a means of enabling trusted IoT app development at the network edge. The Databox platform is a dedicated domestic platform that stores IoT, mobile and cloud data an... Read More about Developing GDPR Compliant Apps For The Edge.

Towards low-cost image-based plant phenotyping using reduced-parameter CNN (2018)
Conference Proceeding

Segmentation is the core of most plant phenotyping applications. Current state-of-the-art plant phenotyping applications rely on deep Convolutional Neural Networks (CNNs). However, these networks have many layers and parameters, increasing training a... Read More about Towards low-cost image-based plant phenotyping using reduced-parameter CNN.

Double Rotor Synchronous Reluctance Machine: Analysis towards Torque Capability (2018)
Conference Proceeding

© 2018 IEEE. This paper presents a comparative analysis of double rotor synchronous reluctance machines. Different topologies of the proposed machine have been investigated, such as double rotor with double-sided stator and double rotor with single-s... Read More about Double Rotor Synchronous Reluctance Machine: Analysis towards Torque Capability.

Pure Functional Epidemics: An Agent-Based Approach (2018)
Conference Proceeding

Agent-Based Simulation (ABS) is a methodology in which a system is simulated in a bottom-up approach by modelling the micro interactions of its constituting parts, called agents, out of which the global system behaviour emerges. So far mainly object-... Read More about Pure Functional Epidemics: An Agent-Based Approach.

Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM (2018)
Conference Proceeding

This paper presents a detailed investigation of AC copper losses in high-speed high-power density permanent magnet synchronous machine. For parallel strands winding, it is not easy to accurately estimate the AC copper losses using finite element mode... Read More about Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM.

Combined Thermofluid and Electromagnetic Optimisation of Stator Vent Cooling (2018)
Conference Proceeding

© 2018 IEEE. A combined electromagnetic and thermal modelling approach has been developed to optimise the design of multiple radial stator vents in an air-cooled, synchronous generator with a power rating of several hundred kVA. An experimentally val... Read More about Combined Thermofluid and Electromagnetic Optimisation of Stator Vent Cooling.

Development of mathematical reference standards for the validation of surface texture parameter calculation software (2018)
Conference Proceeding

A framework for the validation of surface texture parameter calculation software is proposed. The framework utilises mathematically defined surfaces and mathematically calculated surface texture parameter values to produce a reference against which t... Read More about Development of mathematical reference standards for the validation of surface texture parameter calculation software.

Multi-Frequency Averaging (MFA) Model of Electric-Hybrid Powertrain Suitable for Variable Frequency Operation Applied in Geographically-Distributed Power Hardware-in-the-Loop (GD-PHiL) Simulation (2018)
Conference Proceeding

© 2018 IEEE Project aims to develop capability for OEMs and suppliers to 'virtually-connect' multiple prototype powertrain components (engine, motor-drive etc.) and engage in real-time system simulation, thereby reducing cost by eliminating co-locati... Read More about Multi-Frequency Averaging (MFA) Model of Electric-Hybrid Powertrain Suitable for Variable Frequency Operation Applied in Geographically-Distributed Power Hardware-in-the-Loop (GD-PHiL) Simulation.

Multiphase CFD modeling of external oil flow from a journal bearing (2018)
Conference Proceeding

High loads and bearing life requirements make journal bearings a potential choice for use in high power, epicyclic gearboxes in jet engines. Particularly in a planetary configuration the kinematic conditions are complex. With the planet gears rotatin... Read More about Multiphase CFD modeling of external oil flow from a journal bearing.

Electrical Machine Rotor Shielding for Low Cost Electrical Drive (2018)
Conference Proceeding

Electrical machine rotor shielding has been proposed for high-speed electrical machines, i.e. ≥50krpm, where a smooth current waveform becomes difficult and costly to generate due to the required high switching frequency. The rotor shielding is used... Read More about Electrical Machine Rotor Shielding for Low Cost Electrical Drive.

Design of an Integrated Inductor for 45kW Aerospace Starter-Generator (2018)
Conference Proceeding

A close physical and functional integration of passive components is required to make an efficient and power dense overall system. Such power dense systems are a prerequisite in aerospace and marine applications. This paper presents a design of an in... Read More about Design of an Integrated Inductor for 45kW Aerospace Starter-Generator.

Mass Production Costing of Induction Machines for Automotive Applications (2018)
Conference Proceeding

Cost is one of the key parameters of electric machines designed for automotive applications. In order to keep manufacturing cost low, it is desirable to estimate the manufacturing cost of the machine in the early stages of the design process. For thi... Read More about Mass Production Costing of Induction Machines for Automotive Applications.

Model checking for Coalition Announcement Logic (2018)
Conference Proceeding

Coalition Announcement Logic (CAL) studies how a group of agents can enforce a certain outcome by making a joint announcement, regardless of any announcements made simultaneously by the opponents. The logic is useful to model imperfect information ga... Read More about Model checking for Coalition Announcement Logic.

A big data approach for investigating the performance of road infrastructure (2018)
Conference Proceeding

“Using truck sensors for road pavement performance investigation” is a research project within TRUSS, an innovative training network funded from the EU under the Horizon 2020 programme. The project aims at assessing the impact of the condition of the... Read More about A big data approach for investigating the performance of road infrastructure.

Risk sensitive decision making using type reduction methods (2018)
Conference Proceeding

Towards Better Understanding the Challenges of Reliable and Trust-Aware Critical Communications in the Aftermath of Disaster (2018)
Conference Proceeding

This paper seeks to better understand the highly multi-dimensional, multi-faceted challenges of meeting trust and reliability requirements in critical, disaster aftermath communication networks comprising heterogeneous groups of sensor equipped nodes... Read More about Towards Better Understanding the Challenges of Reliable and Trust-Aware Critical Communications in the Aftermath of Disaster.

Investigating user needs and integration of Remote Measuring Technologies into clinical practice (2018)
Conference Proceeding

Synthesis of polydimethylsiloxane microspheres using microfluidics for treatment of toluene in wastewater (2018)
Conference Proceeding

Copyright © 2018 ASME. Monodispersed polydimethylsiloxane (PDMS) microspheres are fabricated by a needle-based versatile microfluidic device with flow-focusing geometry. Microdroplets with various diameters are generated by tuning the flow rate of th... Read More about Synthesis of polydimethylsiloxane microspheres using microfluidics for treatment of toluene in wastewater.

Experimental analysis of a PCM-Air heat exchanger for building cooling in hot-arid climates (2018)
Conference Proceeding

The use of phase change materials as energy storage of cooling during the night-time to be retrieved during the hot daytime is one of the sustainable strategies for cooling buildings. In the present work, a modular PCM-air heat exchanger appropriate... Read More about Experimental analysis of a PCM-Air heat exchanger for building cooling in hot-arid climates.