All Outputs (219)

Experimental implementation of a linear control technique for a single-phase matrix converter (2016)
Conference Proceeding
Rivera, M., Rojas, S., Wheeler, P., & Yaramasu, V. (2016). Experimental implementation of a linear control technique for a single-phase matrix converter.

This paper describes a matrix converter with a three-phase input and single-phase output that can be used as a building block for high-power cascaded converters. In this paper a sinusoidal pulse width modulation technique with a linear controller is... Read More about Experimental implementation of a linear control technique for a single-phase matrix converter.

Predictive control in matrix converters. Part I, Principles, topologies and applications (2016)
Conference Proceeding
Rivera, M., Wheeler, P., & Olloqui, A. (2016). Predictive control in matrix converters. Part I, Principles, topologies and applications.

This paper presents an overview of the predictive control principles applied to matrix converters and also the different topologies where this control technique is applied. It will be shown that the predictive strategy is a promising alternative to c... Read More about Predictive control in matrix converters. Part I, Principles, topologies and applications.

Predictive control in matrix converters. Part II, Control strategies, weaknesses and trends (2016)
Conference Proceeding
Rivera, M., Wheeler, P., & Olloqui, A. (2016). Predictive control in matrix converters. Part II, Control strategies, weaknesses and trends.

The second part of this paper presents an overview of different control strategies and applications for matrix converters (MCs) where predictive control techniques are applied. It will be shown that predictive control is a promising alternative to co... Read More about Predictive control in matrix converters. Part II, Control strategies, weaknesses and trends.

A novel double quad-inverter configuration for multilevel twelve-phase open-winding converter (2016)
Conference Proceeding
Padmanaban, S., Blaabjerg, F., Wheeler, P., Ojo Olorunfemi, J., & Maroti, P. K. (2016). A novel double quad-inverter configuration for multilevel twelve-phase open-winding converter.

This paper work articulates the novel proposal of double quad-inverter configuration for multilevel twelve-phase open-winding ac converter. Modular power units are developed from reconfigured eight classical three-phase voltage source inverters (VSIs... Read More about A novel double quad-inverter configuration for multilevel twelve-phase open-winding converter.

An analytical modeling and estimating losses of power semiconductors in a three-phase dual active bridge converter for MVDC grids (2016)
Conference Proceeding
Lee, Y., Vakil, G., Watson, A. J., & Wheeler, P. (2016). An analytical modeling and estimating losses of power semiconductors in a three-phase dual active bridge converter for MVDC grids.

Due to the increasing installation of renewable and decentralized power sources, Medium-voltage dc (MVDC) grids has been considered for an alternative application to medium-voltage ac (MVAC) application. Three-phase dual active bridge DC-DC (3DAB) co... Read More about An analytical modeling and estimating losses of power semiconductors in a three-phase dual active bridge converter for MVDC grids.

A predictive control strategy for a single-phase AC-AC converter (2016)
Conference Proceeding
Rivera, M., Rojas, S., Wheeler, P., & Rodriguez, J. (2016). A predictive control strategy for a single-phase AC-AC converter.

This paper presents a finite control set model predictive current control strategy with a prediction horizon of one sampling time to control the single-phase matrix converter. The proposed current control strategy is based on a prediction calculation... Read More about A predictive control strategy for a single-phase AC-AC converter.

A review of predictive control techniques for matrix converters: part I (2016)
Conference Proceeding
Rivera, M., Wheeler, P., Olloqui, A., & Khaburi, D. (2016). A review of predictive control techniques for matrix converters: part I.

The predictive strategy is a promising alternative to control matrix converters and due to its simplicity and flexibility to include additional aspects in the control, its implementation can be extended to different topologies and industrial applicat... Read More about A review of predictive control techniques for matrix converters: part I.

A review of predictive control techniques for matrix converters: part II (2016)
Conference Proceeding
Rivera, M., Wheeler, P., Olloqui, A., & Khaburi, D. (2016). A review of predictive control techniques for matrix converters: part II.

The second part of this paper presents an overview of different control strategies and applications for matrix converters (MCs) where predictive control techniques are applied. It will be shown that predictive control is a promising alternative to co... Read More about A review of predictive control techniques for matrix converters: part II.

Control of a hybrid modular multilevel converter during grid voltage unbalance (2015)
Conference Proceeding
Amankwah, E. K., Watson, A., Wheeler, P., & Clare, J. C. Control of a hybrid modular multilevel converter during grid voltage unbalance.

The recently proposed parallel hybrid modular multilevel converter is considered to be a low loss, low component count converter with soft switching capability of the ‘main’ bridge. The converter has similar advantages to other emerging modular multi... Read More about Control of a hybrid modular multilevel converter during grid voltage unbalance.

A hybrid inverter system for medium voltage applications using a low voltage auxiliary CSI (2014)
Conference Proceeding
Papadopoulos, S., Rashed, M., Klumpner, C., & Wheeler, P. (2014). A hybrid inverter system for medium voltage applications using a low voltage auxiliary CSI. In 2014 IEEE Energy Conversion Congress and Exposition (ECCE). https://doi.org/10.1109/ecce.2014.6953779

Hybrid converters consist of a main inverter processing the bulk of the power with poor waveform performance and a fast and versatile auxiliary inverter to correct the distortion. In this paper, the main converter is a medium voltage NPC inverter and... Read More about A hybrid inverter system for medium voltage applications using a low voltage auxiliary CSI.

A hybrid inverter solution for medium voltage applications using series capacitor and a CSI Active Power Filter (SC-APF) (2014)
Conference Proceeding
Papadopoulos, S., Rashed, M., Klumpner, C., & Wheeler, P. (2014). A hybrid inverter solution for medium voltage applications using series capacitor and a CSI Active Power Filter (SC-APF). In 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014). https://doi.org/10.1049/cp.2014.0456

This paper proposes a new hybrid inverter solution for medium/high voltage applications that consists of a slow switching inverter using high voltage or series connected switching devices, fitted with a low kVA rated auxiliary current source inverter... Read More about A hybrid inverter solution for medium voltage applications using series capacitor and a CSI Active Power Filter (SC-APF).

Superconducting and conventional electromagnetic launch system for civil aircraft assisted take-off
Conference Proceeding
Bertola, L., Cox, T., Wheeler, P., & Garvey, S. D. (in press). Superconducting and conventional electromagnetic launch system for civil aircraft assisted take-off.

This paper compares three possible linear motor topologies for an electromagnetic launch system to assist civil aircraft take-off. Assisted launch of civil aircraft has the potential of reducing the required runway length, reducing noise and emission... Read More about Superconducting and conventional electromagnetic launch system for civil aircraft assisted take-off.

A new class of hybrid AC/AC direct power converters
Conference Proceeding
Klumpner, C., Wijekoon, T., & Wheeler, P. (in press). A new class of hybrid AC/AC direct power converters. In Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005. https://doi.org/10.1109/IAS.2005.1518793

Variable voltage and variable frequency conversion of electrical energy from an AC source to an AC load is done in traditional power converters via a DC-link where an energy storage element (electrolytic capacitors) is situated. Despite its well-know... Read More about A new class of hybrid AC/AC direct power converters.

A new three-level sparse indirect matrix converter
Conference Proceeding
Klumpner, C., Lee, M. Y., & Wheeler, P. (in press). A new three-level sparse indirect matrix converter. In IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics. https://doi.org/10.1109/IECON.2006.347958

Matrix converters are forced commutated single stage AC/AC direct frequency changers able to achieve sine wave in and out operation by being able to connect any input phase to any output phase via a 3x3 matrix of bi-directional switches. Indirect two... Read More about A new three-level sparse indirect matrix converter.

A new three-level indirect matrix converter with reduced number of switches
Conference Proceeding
Klumpner, C., Lee, M. Y., Pitic, C., Wheeler, P., & Zanchetta, P. (in press). A new three-level indirect matrix converter with reduced number of switches. In 2007 IEEE Industry Applications Annual Meeting. https://doi.org/10.1109/07IAS.2007.28

Matrix converters are sine wave in/out forced commutated single-stage AC/AC direct frequency changers using a single bi-directional switch to connect any input to any output. Indirect two-stage matrix converters provide similar input and output perfo... Read More about A new three-level indirect matrix converter with reduced number of switches.

A more efficient current source inverter with series connected AC capacitors for photovoltaic and fuel cell applications
Conference Proceeding
Klumpner, C., Chonlatee, P., & Wheeler, P. (in press). A more efficient current source inverter with series connected AC capacitors for photovoltaic and fuel cell applications.

Renewable energy sources such as photovoltaics (PVs) or fuel cells (FCs) are not fitted for direct power grid connection because they deliver DC voltage and current. In addition, they also have a high internal resistance/nonlinear V/I dependence, whi... Read More about A more efficient current source inverter with series connected AC capacitors for photovoltaic and fuel cell applications.

A current source inverter with series connected AC capacitors for photovoltaic application with grid fault ride through capability
Conference Proceeding
Photong, C., Klumpner, C., & Wheeler, P. (in press). A current source inverter with series connected AC capacitors for photovoltaic application with grid fault ride through capability. In 2009 35th Annual Conference of IEEE Industrial Electronics. https://doi.org/10.1109/IECON.2009.5414954

The current source inverter (CSI) is preferred to interface a renewable source such photovoltaics (PV) to the AC power grid because it can provide smooth current source in the DC side, which fits to the PV behaviour and also steps-up the voltage from... Read More about A current source inverter with series connected AC capacitors for photovoltaic application with grid fault ride through capability.

Integrated output filter inductor for permanent magnet motor drives
Conference Proceeding
Raza Khowja, M., Gerada, C., Vakil, G., Wheeler, P., & Patel, C. (in press). Integrated output filter inductor for permanent magnet motor drives.

This paper presents a novel approach to integrate the output filter inductor in permanent magnet synchronous motor (PMSM) drive system. The integrated output filter inductor is based on utilizing the motor magnetics as a filter inductance instead of... Read More about Integrated output filter inductor for permanent magnet motor drives.

Performance Evaluation of Cascaded H-bridge Multilevel Grid-Connected Converter with Model Predictive Control Technique
Conference Proceeding
Hosseinzadeh, M. A., Sarbanzadeh, M., Salehi, A., Rivera, M., Munoz, J., & Wheeler, P. (2019). Performance Evaluation of Cascaded H-bridge Multilevel Grid-Connected Converter with Model Predictive Control Technique. In 2019 IEEE International Conference on Industrial Technology (ICIT). https://doi.org/10.1109/icit.2019.8755160

Cascaded H-bridge multilevel converter (CHB) is a promising topology for grid-connection systems. On the other side, model predictive controls are advanced control strategies which have many advantages for power converters applications like as fast d... Read More about Performance Evaluation of Cascaded H-bridge Multilevel Grid-Connected Converter with Model Predictive Control Technique.