All Outputs (353)

Prediction Interval Identification Using Interval Type-2 Fuzzy Logic Systems: Lake Water Level Prediction Using Remote Sensing Data (2021)
Journal Article

This paper presents a novel approach to identify the prediction interval associated with data using interval type-2 fuzzy logic systems with support vector regression. For such a purpose, a constrained quadratic objective function is defined which is... Read More about Prediction Interval Identification Using Interval Type-2 Fuzzy Logic Systems: Lake Water Level Prediction Using Remote Sensing Data.

Parametric sizing study for the design of a lightweight composite railway axle (2021)
Journal Article

The potential for lightweighting of railway axles was investigated to primarily reduce the unsprung mass of a rail vehicle. The reduction of unsprung mass equates to an overall lighter train which will help to reduce track damage, energy consumption... Read More about Parametric sizing study for the design of a lightweight composite railway axle.

A Thermal Modelling Approach and Experimental Validation for an Oil Spray-Cooled Hairpin Winding Machine (2021)
Journal Article

Experimental study and modeling of oxy-char combustion in a pressurized fluidized bed combustor (2021)
Journal Article

Mechanical Characterization of Iroko Wood Using Small Specimens (2021)
Journal Article

Characterising Brazilian Housing through an Investigation of Policies, Architecture and Statistics (2021)
Journal Article

Defining common housing characteristics such as typology, floor areas and occupancy rates can be challenging in many countries because of the prevalence of self-built and/or self-promoted accommodation. Yet, for researchers, designers and policy make... Read More about Characterising Brazilian Housing through an Investigation of Policies, Architecture and Statistics.

Thermo-mechanical Dynamics of Nanoimprinting Anti-Reflective Structures onto Small-core Mid- IR Chalcogenide Fibers (2021)
Journal Article

Thermal nanoimprinting is a fast and versatile method for transferring the anti-reflective properties of subwavelength nanostructures onto the surface of highly reflective substrates, such as chalcogenide glass optical fiber end-facets. In this paper... Read More about Thermo-mechanical Dynamics of Nanoimprinting Anti-Reflective Structures onto Small-core Mid- IR Chalcogenide Fibers.

Cavity expansion-contraction based method for tunnel-soil-pile interaction in a unified clay and sand model: drained analysis (2021)
Journal Article

This paper proposes an analytical method based on drained solutions of cavity expansion and contraction in a unified clay and sand model to investigate tunnel-soil-pile interactions. Cavity expansion analyses are used to evaluate the effects of pile... Read More about Cavity expansion-contraction based method for tunnel-soil-pile interaction in a unified clay and sand model: drained analysis.

A Model to Investigate the Impact of Farm Practice on Antimicrobial Resistance in UK Dairy Farms (2021)
Journal Article

© 2021, The Author(s). The ecological and human health impact of antibiotic use and the related antimicrobial resistance (AMR) in animal husbandry is poorly understood. In many countries, there has been considerable pressure to reduce overall antibio... Read More about A Model to Investigate the Impact of Farm Practice on Antimicrobial Resistance in UK Dairy Farms.

Using a hazard-independent approach to understand road-network robustness to multiple disruption scenarios (2021)
Journal Article

Evaluating the cytotoxicity of Ge–Sb–Se chalcogenide glass optical fibres on 3T3 mouse fibroblasts (2021)
Journal Article

In vivo cancer detection based on the mid-infrared molecular fingerprint of tissue is promising for the fast diagnosis and treatment of suspected cancer patients. Few materials are mid-infrared transmissive, even fewer, which can be converted into fu... Read More about Evaluating the cytotoxicity of Ge–Sb–Se chalcogenide glass optical fibres on 3T3 mouse fibroblasts.

A Cascade PI-SMC Method for Matrix Converter-Fed BDFIM Drives (2021)
Journal Article

This article proposes a cascade proportional-integral second-order sliding mode control (PI-SMC) method for matrix converter-fed brushless doubly fed induction machine (BDFIM). The PI-SMC method consists of a PI speed controller with an inner-loop se... Read More about A Cascade PI-SMC Method for Matrix Converter-Fed BDFIM Drives.

A Coupled Modelling Method for the Evaluation of the Impact of Pavement Solar Collector on Urban Air Temperature and Thermal Collection (2021)
Journal Article

Universal mobility characteristics of graphene originating from charge scattering by ionised impurities (2021)
Journal Article

Pristine graphene and graphene-based heterostructures can exhibit exceptionally high electron mobility if their surface contains few electron-scattering impurities. Mobility directly influences electrical conductivity and its dependence on the carrie... Read More about Universal mobility characteristics of graphene originating from charge scattering by ionised impurities.

Characterisation of a multi-view fringe projection system based on the stereo matching of rectified phase maps (2021)
Journal Article

Multi-view fringe projection systems can be effective solutions to address the limitations imposed by the limited field of view, line-of-sight issues and occlusions when measuring the geometry of complex objects, associated with single camera-projec... Read More about Characterisation of a multi-view fringe projection system based on the stereo matching of rectified phase maps.

Numerical investigation of heat transfer and flow characteristics of a double-wall cooling structure: Reverse circular jet impingement (2021)
Journal Article

Additively manufactured ultra-high vacuum chamber for portable quantum technologies (2021)
Journal Article

© 2021 Additive manufacturing is having a dramatic impact on research and industry across multiple sectors, but the production of additively manufactured systems for ultra-high vacuum applications has so far proved elusive and widely been considered... Read More about Additively manufactured ultra-high vacuum chamber for portable quantum technologies.

Understanding Layered Double Hydroxide properties as sorbent materials for removing organic pollutants from environmental waters (2021)
Journal Article

Emerging contaminants (ECs) are a group of anthropogenic organic pollutants known to have a host of adverse environmental and health implications. The removal of such pollutants from aqueous environments to ensure water is of a quality fit for reuse... Read More about Understanding Layered Double Hydroxide properties as sorbent materials for removing organic pollutants from environmental waters.

Bayesian inversion algorithm for estimating local variations in permeability and porosity of reinforcements using experimental data (2021)
Journal Article

Multiple target data-driven models to enable sustainable process manufacturing: An industrial bioprocess case study (2021)
Journal Article

Process manufacturing industries constantly strive to make their processes increasingly sustainable from an environmental and economic perspective. A manufacturing system model is a powerful tool to holistically evaluate various manufacturing configu... Read More about Multiple target data-driven models to enable sustainable process manufacturing: An industrial bioprocess case study.