All Outputs (11)

Modelling and experimental study of laser-assisted milling of fibre reinforced SiC/Ti-6Al-4V metal matrix composite (2023)
Journal Article
Mypati, O., Panzer, J., Robles-Linares, J. A., Zan, S., Liao, Z., & Axinte, D. (2024). Modelling and experimental study of laser-assisted milling of fibre reinforced SiC/Ti-6Al-4V metal matrix composite. Materials and Design, 237, Article 112552. https://doi.org/10.1016/j.matdes.2023.112552

Metal matrix composites (MMCs) offer unique advantageous mechanical properties by strengthening a ductile metal matrix with a ceramic reinforcement (e.g., Ti6Al-4 V/SiCf). However, their heterogeneous composition poses machining challenges including... Read More about Modelling and experimental study of laser-assisted milling of fibre reinforced SiC/Ti-6Al-4V metal matrix composite.

An analytical differential kinematics-based method for controlling tendon-driven continuum robots (2023)
Journal Article
Ba, W., Chang, J., Liu, J., Wang, X., Dong, X., & Axinte, D. (2024). An analytical differential kinematics-based method for controlling tendon-driven continuum robots. Robotics and Autonomous Systems, 171, Article 104562. https://doi.org/10.1016/j.robot.2023.104562

Generic and high-performance feedback control is still challenging for tendon-driven continuum robots. Conventional model-based controllers, based on the piecewise constant curvature (PCC) assumption, explicitly require the arc parameters (bending an... Read More about An analytical differential kinematics-based method for controlling tendon-driven continuum robots.

Efficient and Scalable Inverse Kinematics for Continuum Robots (2023)
Journal Article
Wild, S., Zeng, T., Mohammad, A., Billingham, J., Axinte, D., & Dong, X. (2024). Efficient and Scalable Inverse Kinematics for Continuum Robots. IEEE Robotics and Automation Letters, 9(1), 375 - 381. https://doi.org/10.1109/lra.2023.3331291

With their flexible nature, continuum robots offer hyper-redundancy regarding their workspace; their backbone can take many shapes upon a single tip position and orientation. Deciphering which backbone shape to use under certain conditions is crucial... Read More about Efficient and Scalable Inverse Kinematics for Continuum Robots.

A Robust Human–Robot Collaborative Control Approach Based on Model Predictive Control (2023)
Journal Article
Zeng, T., Mohammad, A., Madrigal, A. G., Axinte, D., & Keedwell, M. (2023). A Robust Human–Robot Collaborative Control Approach Based on Model Predictive Control. IEEE Transactions on Industrial Electronics, https://doi.org/10.1109/TIE.2023.3299046

Human skill-based robotic control to perform critical manufacturing operations (e.g., repair and inspection for high-value assets) can reduce scrap rates and increase overall profitability in the industrial community. In this study, a human–robotic c... Read More about A Robust Human–Robot Collaborative Control Approach Based on Model Predictive Control.

Investigation of the grain deformation to orthogonal cutting process of the textured Alloy 718 fabricated by laser powder bed fusion (2023)
Journal Article
Li, L., Chen, H., Liao, Z., Yang, Y., & Axinte, D. (2023). Investigation of the grain deformation to orthogonal cutting process of the textured Alloy 718 fabricated by laser powder bed fusion. International Journal of Machine Tools and Manufacture, 190, Article 104050. https://doi.org/10.1016/j.ijmachtools.2023.104050

In the laser powder bed fusion (LPBF), the grains grow in preferential directions depending on the scanning strategies, which results in layer-by-layer builds of particular crystallographic textures. The unique microstructure formed by LPBF results i... Read More about Investigation of the grain deformation to orthogonal cutting process of the textured Alloy 718 fabricated by laser powder bed fusion.

Modeling and simulation of surface generation in manufacturing (2023)
Journal Article
Tosello, G., Bissacco, G., Cao, J., & Axinte, D. (2023). Modeling and simulation of surface generation in manufacturing. CIRP Annals - Manufacturing Technology, 72(2), 753-779. https://doi.org/10.1016/j.cirp.2023.05.002

The paper describes the state-of-the-art in modeling and simulation of surface texture and topography generation at micro and nano dimensional scales. Three main classes of manufacturing processes used for the generation of engineering surfaces are... Read More about Modeling and simulation of surface generation in manufacturing.

Continuum Robots: An Overview (2023)
Journal Article
Russo, M., Sadati, S. H., Dong, X., Mohammad, A., Walker, I. D., Bergeles, C., …Axinte, D. A. (2023). Continuum Robots: An Overview. Advanced Intelligent Systems, 5(5), Article 2200367. https://doi.org/10.1002/aisy.202200367

In this paper, we discuss recent advances, current limitations, and open challenges in the design, modeling, and control of continuum robots. Thanks to their lean bodies, these robots achieve a long reach through narrow and tortuous environments, ena... Read More about Continuum Robots: An Overview.

Tailorable shielded compliance of thermal barrier coatings through laser texturing and microstructural modification: microfeature design and validation (2023)
Journal Article
Bogatyrev, A., Liao, Z., Axinte, D., & Norton, A. (2023). Tailorable shielded compliance of thermal barrier coatings through laser texturing and microstructural modification: microfeature design and validation. Journal of the European Ceramic Society, 43(8), 3704-3726. https://doi.org/10.1016/j.jeurceramsoc.2023.02.035

Thermal barrier coatings (TBCs) are widely used for protecting components from an aggressive environment and excessive temperatures. However, the top coat can lack thermal compliance and environmental resistance, promoting premature failure. This stu... Read More about Tailorable shielded compliance of thermal barrier coatings through laser texturing and microstructural modification: microfeature design and validation.

A rational approach to beam path planning in additive manufacturing: the inverse heat placement problem (2023)
Journal Article
Yang, Y., Billingham, J., Axinte, D., & Liao, Z. (2023). A rational approach to beam path planning in additive manufacturing: the inverse heat placement problem. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 479(2270), Article 20220386. https://doi.org/10.1098/rspa.2022.0386

High demand for components with complex geometries at macro and micro levels drives the development of additive manufacturing (AM). However, the scientific basis for designing energy beam scanning strategies (e.g. beam scanning speed, beam path, beam... Read More about A rational approach to beam path planning in additive manufacturing: the inverse heat placement problem.

Machining of long ceramic fibre reinforced metal matrix composites – How could temperature influence the cutting mechanisms? (2023)
Journal Article
Zan, S., Liao, Z., Robles-Linares, J. A., Garcia Luna, G., & Axinte, D. (2023). Machining of long ceramic fibre reinforced metal matrix composites – How could temperature influence the cutting mechanisms?. International Journal of Machine Tools and Manufacture, 185, Article 103994. https://doi.org/10.1016/j.ijmachtools.2023.103994

Metal matrix composites (MMCs) offer a unique set of properties due to the ductile-brittle combination produced by the matrix and the reinforcements. Conventional MMCs are usually particle-reinforced, and their cutting mechanisms have been thoroughly... Read More about Machining of long ceramic fibre reinforced metal matrix composites – How could temperature influence the cutting mechanisms?.

Design and Control of a Multiple-Section Continuum Robot With a Hybrid Sensing System (2023)
Journal Article
Fang, Y., Dong, X., Mohammad, A., & Axinte, D. (2023). Design and Control of a Multiple-Section Continuum Robot With a Hybrid Sensing System. IEEE/ASME Transactions on Mechatronics, 28(3), 1522-1533. https://doi.org/10.1109/TMECH.2022.3229188

After decades of development, the technology of continuum robots continues to mature gradually and is used for various applications, e.g., inspection and repair in high-value-added industries such as aerospace & nuclear. However, such robots are inva... Read More about Design and Control of a Multiple-Section Continuum Robot With a Hybrid Sensing System.