All Outputs (16)

Asymmetrical Flux Density Distribution in Stator Teeth of Surface Permanent Magnet Machines (2019)
Conference Proceeding
Sala, G., De Gaetano, D., Degano, M., & Gerada, C. (2019). Asymmetrical Flux Density Distribution in Stator Teeth of Surface Permanent Magnet Machines. In Proceedings - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (29-33). https://doi.org/10.1109/WEMDCD.2019.8887831

This work is showing in detail the flux density behaviour in the stator teeth of a synchronous machine. A 3-phase Surface Permanent Magnet (SPM) motor is considered. These motors are widely employed in applications where high efficiency and power den... Read More about Asymmetrical Flux Density Distribution in Stator Teeth of Surface Permanent Magnet Machines.

Synchronous Reluctance Motor Iron Losses: Analytical Model and Optimization (2018)
Conference Proceeding
Mahmoud, H., Degano, M., Bacco, G., Bianchi, N., & Gerada, C. (2018). Synchronous Reluctance Motor Iron Losses: Analytical Model and Optimization. In 2018 IEEE Energy Conversion Congress and Exposition (ECCE) (1640-1647). https://doi.org/10.1109/ECCE.2018.8558292

The complex rotor structure of synchronous reluctance machines causes a high harmonic content in the air-gap flux density and then flux density fluctuations in different iron parts. The importance of determining accurately the total iron losses in th... Read More about Synchronous Reluctance Motor Iron Losses: Analytical Model and Optimization.

Design of PMSM for EMA Employed in Secondary Flight Control Systems (2018)
Conference Proceeding
Giangrande, P., Al-Timimy, A., Galassini, A., Papadopoulos, S., Degano, M., & Galea, M. (2018). Design of PMSM for EMA Employed in Secondary Flight Control Systems. In Proceedings - 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607467

© 2018 IEEE. The more electric aircraft (MEA) initiative aims to improve weight, fuel consumption and maintenance costs of the aircraft, by increasing the use of electric power in actuation systems. Considering this scenario, electromechanical actuat... Read More about Design of PMSM for EMA Employed in Secondary Flight Control Systems.

A Novel Newton-Raphson-Based Searching Method for the MTPA Control of Pmasynrm Considering Magnetic and Cross Saturation (2018)
Conference Proceeding
Wang, S., Degano, M., Kang, J., Galassini, A., & Gerada, C. (2018). A Novel Newton-Raphson-Based Searching Method for the MTPA Control of Pmasynrm Considering Magnetic and Cross Saturation. In Proceedings 2018 XIII International Conference on Electrical Machines (ICEM) (1360-1366). https://doi.org/10.1109/ICELMACH.2018.8506853

Maximum torque per ampere control (MTPA) takes full advantage of the reluctance torque aiming at the minimum copper loss, which can increase the torque output under the minimum current conditions. The traditional MTPA method makes use of equations wi... Read More about A Novel Newton-Raphson-Based Searching Method for the MTPA Control of Pmasynrm Considering Magnetic and Cross Saturation.

Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM (2018)
Conference Proceeding
Al-Timimy, A., Giangrande, P., Degano, M., Galea, M., & Gerada, C. (2018). Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM. In Proceedings - 2018 XIII International Conference on Electrical Machines (ICEM) (263-269). https://doi.org/10.1109/ICELMACH.2018.8507166

This paper presents a detailed investigation of AC copper losses in high-speed high-power density permanent magnet synchronous machine. For parallel strands winding, it is not easy to accurately estimate the AC copper losses using finite element mode... Read More about Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM.

The impact of impulsive voltage waveforms on the electrical insulation of actuators for more electrical aircraft (MEA) (2017)
Conference Proceeding
Cavallini, A., Lusaurdi, L., & Degano, M. (in press). The impact of impulsive voltage waveforms on the electrical insulation of actuators for more electrical aircraft (MEA).

To reduce the size and weight of aircraft actuators, wide band-gap semiconductor devices (SiC and GaN) are the most promising solution. These devices have switching times well below those of silicon devices. Very short rise times may enhance the elec... Read More about The impact of impulsive voltage waveforms on the electrical insulation of actuators for more electrical aircraft (MEA).

A system level comparison of drive topologies for high speed electrical machines (2017)
Conference Proceeding
Savi, F., Barater, D., Di Nardo, M., Degano, M., & Gerada, C. (2017). A system level comparison of drive topologies for high speed electrical machines.

This paper presents a comprehensive comparative study among five different converter topologies all designed to drive a 8.5kW-120krpm surface permanent magnet synchronous machine. The study aims at comparing the considered systems in terms of convert... Read More about A system level comparison of drive topologies for high speed electrical machines.

Axial eccentric SynRel and SPM motors analytical models validation using 3D finite element (2017)
Conference Proceeding
Mahmoud, H., Al-Timimy, A., Degano, M., Di Nardo, M., Bianchi, N., & Gerada, C. (2017). Axial eccentric SynRel and SPM motors analytical models validation using 3D finite element. In Proceedings of the 2017 - IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, SDEMPED 2017 (38-44). https://doi.org/10.1109/DEMPED.2017.8062331

This paper deals with the uniform and non-uniform axial eccentricity analyses of the surface mounted permanent magnet and synchronous reluctance machines. The analyses are carried out using an analytical model for each considered machine. Being the a... Read More about Axial eccentric SynRel and SPM motors analytical models validation using 3D finite element.

Holistic electrical machine optimization for system integration (2017)
Conference Proceeding
Gerada, D., Golovanov, D., Xu, Z., Papini, L., Degano, M., Zhang, H., & Gerada, C. (2017). Holistic electrical machine optimization for system integration. In 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia) (980-985). https://doi.org/10.1109/IFEEC.2017.7992174

The power density of electrical machines required for transport applications has become a critical aspect and target of optimization. This paper looks at the development aspects of a multi-domain tool to aid for system-level optimization of electrica... Read More about Holistic electrical machine optimization for system integration.

Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators (2017)
Conference Proceeding
Wang, Y., Vakil, G., Nuzzo, S., Degano, M., Galea, M., Gerada, C., …Brown, N. (2017). Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators. In Proceedings - 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (163-168). https://doi.org/10.1109/WEMDCD.2017.7947741

Objective of this paper is to provide design recommendations to improve the performance and power density of a 400kVA salient-pole synchronous generator, without exceeding the limitations due to critical parameters such as total harmonic distortion o... Read More about Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators.

Comparative study of permanent magnet-synchronous and permanent magnet-flux switching machines for high torque to inertia applications (2017)
Conference Proceeding
Al-Timimy, A., Giangrande, P., Degano, M., Galea, M., & Gerada, C. (2017). Comparative study of permanent magnet-synchronous and permanent magnet-flux switching machines for high torque to inertia applications. In Proceedings - 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (45-51). https://doi.org/10.1109/WEMDCD.2017.7947722

This paper investigates the capability of both permanent magnet synchronous machine (PMSM) and permanent magnet flux switching (PMFS) machine to provide high torque to inertia ratio for applications with demanding response in terms of acceleration an... Read More about Comparative study of permanent magnet-synchronous and permanent magnet-flux switching machines for high torque to inertia applications.

History and recent advancements of electric propulsion and integrated electrical power systems for commercial & naval vessels (2016)
Conference Proceeding
Yang, T., Cox, T., Degano, M., Bozhko, S., & Gerada, C. (2016). History and recent advancements of electric propulsion and integrated electrical power systems for commercial & naval vessels.

Due to developments in power electronics, electric machines, energy storage and control, electric propulsion and integrated electrical power systems have become major trends for commercial and naval vessels. This is mainly due to the fact that the us... Read More about History and recent advancements of electric propulsion and integrated electrical power systems for commercial & naval vessels.

Trade-off analysis and design of a high power density PM machine for flooded industrial pump (2016)
Conference Proceeding
Al-Timimy, A., Degano, M., Xu, Z., Lo Calzo, G., Giangrande, P., Galea, M., …Zhang, H. (2016). Trade-off analysis and design of a high power density PM machine for flooded industrial pump.

This paper presents the trade-off analysis and design of a high power-density machine for industrial pump applications. The developed permanent magnet synchronous machine drives an electric, oil flooded pump. Different slot/pole combination and windi... Read More about Trade-off analysis and design of a high power density PM machine for flooded industrial pump.

Distributed current control for multi-three phase synchronous machines in fault conditions (2016)
Conference Proceeding
Galassini, A., Costabeber, A., Degano, M., Gerada, C., Tessarolo, A., & Castellan, S. (2016). Distributed current control for multi-three phase synchronous machines in fault conditions.

Among challenges and requirements of on-going electrification process and future transportation systems there is demand for arrangements with both increased fault tolerance and reliability. Next aerospace, power-train and automotive systems exploitin... Read More about Distributed current control for multi-three phase synchronous machines in fault conditions.

Thermal management of a permanent magnet motor for an directly coupled pump (2016)
Conference Proceeding
Xu, Z., Al-Timimy, A., Degano, M., Giangrande, P., Lo Calzo, G., Zhang, H., …Gerada, C. (2016). Thermal management of a permanent magnet motor for an directly coupled pump.

A high speed permanent magnet motor is designed for a flooded industrial pump. Oil in the pump is used to cool the motor. Due to the limitation of space and mass requirement for the application, thermal management is one of the main challenges. This... Read More about Thermal management of a permanent magnet motor for an directly coupled pump.

Design and optimization of a high power density machine for flooded industrial pump (2016)
Conference Proceeding
Al-Timimy, A., Degano, M., Giangrande, P., Lo Calzo, G., Xu, Z., Galea, M., …Xia, L. (2016). Design and optimization of a high power density machine for flooded industrial pump.

This paper presents the design optimization procedure of a high power-density, permanent magnet synchronous machine for industrial pump applications. The designed machine drives an electric, oil flooded pump. In order to achieve higher torque-density... Read More about Design and optimization of a high power density machine for flooded industrial pump.