All Outputs (254)

A feeling for what's best: landscape aesthetics and notions of appropriate residential architecture in Dartmoor National Park, England (2017)
Journal Article
Tatum, K., Porter, N., & Hale, J. (2017). A feeling for what's best: landscape aesthetics and notions of appropriate residential architecture in Dartmoor National Park, England. Journal of Rural Studies, 56, https://doi.org/10.1016/j.jrurstud.2017.09.013

In England's national parks, the design of new dwellings represents a significant and contested part of landscape planning, inseparable from park conservation ideologies and policies. Within public discourse, new housing proposals can be praised for... Read More about A feeling for what's best: landscape aesthetics and notions of appropriate residential architecture in Dartmoor National Park, England.

Parametric analysis of a cross-flow membrane-based parallel-plate liquid desiccant dehumidification system: numerical and experimental data (2017)
Journal Article
Bai, H., Zhu, J., Chen, Z., & Chu, J. (2018). Parametric analysis of a cross-flow membrane-based parallel-plate liquid desiccant dehumidification system: numerical and experimental data. Energy and Buildings, 158, https://doi.org/10.1016/j.enbuild.2017.10.018

Operating parameters of a membrane-based parallel-plate liquid desiccant dehumidification system are investigated in this paper. The liquid desiccant and air are in a cross-flow arrangement, and separated by semi-permeable membranes to avoid carry-ov... Read More about Parametric analysis of a cross-flow membrane-based parallel-plate liquid desiccant dehumidification system: numerical and experimental data.

Year-round performance assessment of a ground source heat pump with multiple energy piles (2017)
Journal Article
Cui, Y., & Zhu, J. (2018). Year-round performance assessment of a ground source heat pump with multiple energy piles. Energy and Buildings, 158, https://doi.org/10.1016/j.enbuild.2017.10.033

The year-round performance of a ground source heat pump (GSHP) with multiple energy piles (EPs) is investigated in this study based on a 3D transient heat transfer model. The GSHP heating and cooling capabilities are simulated and assessed according... Read More about Year-round performance assessment of a ground source heat pump with multiple energy piles.

Glazing systems with Parallel Slats Transparent Insulation Material (PS-TIM): evaluation of building energy and daylight performance (2017)
Journal Article
Sun, Y., Liang, R., Wu, Y., Wilson, R., & Rutherford, P. (2018). Glazing systems with Parallel Slats Transparent Insulation Material (PS-TIM): evaluation of building energy and daylight performance. Energy and Buildings, 159, https://doi.org/10.1016/j.enbuild.2017.10.026

Being responsible for a significant proportion of total heat loss in façade dominated buildings, the design and specification of the envelope, particularly the building’s glazing system, is a key factor in determining overall energy consumption. To a... Read More about Glazing systems with Parallel Slats Transparent Insulation Material (PS-TIM): evaluation of building energy and daylight performance.

The mass transfer coefficient assessment and productivity enhancement of a vertical tubular solar brackish water still (2017)
Journal Article
Hou, J., Yang, J., Chang, Z., Zheng, H., & Su, Y. (2018). The mass transfer coefficient assessment and productivity enhancement of a vertical tubular solar brackish water still. Applied Thermal Engineering, 128, 1446–1455. https://doi.org/10.1016/j.applthermaleng.2017.09.129

This paper presents an experimental investigation of a single-effect vertical tubular solar brackish water desalination device, with an aim to determine the mass transfer coefficient and its enhancement. The device consists of two closely spaced conc... Read More about The mass transfer coefficient assessment and productivity enhancement of a vertical tubular solar brackish water still.

Bayesian inferences of the thermal properties of a wall using temperature and heat flux measurements (2017)
Journal Article
Iglesias, M., Sawlan, Z., Scavino, M., Tempone, R., & Wood, C. J. (2018). Bayesian inferences of the thermal properties of a wall using temperature and heat flux measurements. International Journal of Heat and Mass Transfer, 116, https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.022

The assessment of the thermal properties of walls is essential for accurate building energy simulations that are needed to make effective energy-saving policies. These properties are usually investigated through in-situ measurements of temperature an... Read More about Bayesian inferences of the thermal properties of a wall using temperature and heat flux measurements.

A review of sustainable solar irrigation systems for Sub-Saharan Africa (2017)
Journal Article
Wazed, S. M., Hughes, B. R., O'Connor, D., & Calautit, J. K. (2018). A review of sustainable solar irrigation systems for Sub-Saharan Africa. Renewable and Sustainable Energy Reviews, 81, https://doi.org/10.1016/j.rser.2017.08.039

This investigation focused on the research undertaken on solar photovoltaic (PV) and solar thermal technologies for pumping water generally for irrigation of remote rural farms specifically considering the Sub-Saharan African region. Solar PV systems... Read More about A review of sustainable solar irrigation systems for Sub-Saharan Africa.

Cellulosic-crystals as a fumed-silica substitute in vacuum insulated panel technology used in building construction and retrofit applications (2017)
Journal Article
Tetlow, D., Simon, L. D., Liew, S. Y., Hewakandamby, B. N., Mack, D., Thielemans, W., & Riffat, S. (2017). Cellulosic-crystals as a fumed-silica substitute in vacuum insulated panel technology used in building construction and retrofit applications. Energy and Buildings, 156, https://doi.org/10.1016/j.enbuild.2017.08.058

This article investigates impact of substituting fumed silica with a cellulosic-crystal innovation in a commercial Vacuum Insulated Panel (VIP) core. High building performance demands have attracted VIP technology investment to increase production ca... Read More about Cellulosic-crystals as a fumed-silica substitute in vacuum insulated panel technology used in building construction and retrofit applications.

Experimental investigation on a dual-mode thermochemical sorption energy storage system (2017)
Journal Article
Li, T., Wu, S., Yan, T., Wang, R., & Zhu, J. (2017). Experimental investigation on a dual-mode thermochemical sorption energy storage system. Energy, 140(1), 383-394. https://doi.org/10.1016/j.energy.2017.08.073

A dual-mode seasonal solar thermochemical sorption energy storage system using working pair of expanded graphite/SrCl2-NH3 was constructed and investigated. Solar thermal energy is transformed into chemical bonds in summer, and the stored energy is r... Read More about Experimental investigation on a dual-mode thermochemical sorption energy storage system.

Parameter analysis of thermoelectric generator/dc-dc converter system with maximum power point tracking (2017)
Journal Article
Twaha, S., Zhu, J., Li, B., Yan, Y., & Huang, K. (2017). Parameter analysis of thermoelectric generator/dc-dc converter system with maximum power point tracking. Energy for Sustainable Development, 41, https://doi.org/10.1016/j.esd.2017.08.005

The power generated from TEG is relatively unstable owing to temperature variations at its hot and cold side terminals. The dc-dc converters can provide more stable power output thereby improving the overall efficiency of TEG system. However, to faci... Read More about Parameter analysis of thermoelectric generator/dc-dc converter system with maximum power point tracking.

Development of a comprehensive method to analyse glazing systems with Parallel Slat Transparent Insulation material (PS-TIM) (2017)
Journal Article
Sun, Y., Liang, R., Wu, Y., Wilson, R., & Rutherford, P. (2017). Development of a comprehensive method to analyse glazing systems with Parallel Slat Transparent Insulation material (PS-TIM). Applied Energy, 205, https://doi.org/10.1016/j.apenergy.2017.08.041

In order to provide enhanced levels of indoor comfort and building energy conservation, significant improvements have been made in the design of glazed facades and window systems, yielding increases in thermal resistance while simultaneously maintain... Read More about Development of a comprehensive method to analyse glazing systems with Parallel Slat Transparent Insulation material (PS-TIM).

Using quantitative analysis to assess the appropriateness of infill buildings in historic settings (2017)
Journal Article
Hu, Y., Heath, T., Tang, Y., & Zhang, Q. (2017). Using quantitative analysis to assess the appropriateness of infill buildings in historic settings. Journal of Architectural and Planning Research, 34(2),

Over the past 40 years or so, and more recently in developing countries, increasing attention has been paid to the preservation of historic settings; however, with continued development and urbanization, a solution is needed for the problem of how to... Read More about Using quantitative analysis to assess the appropriateness of infill buildings in historic settings.

Experimental investigation of evacuated heat pipe solar collector efficiency using phase-change fluid (2017)
Journal Article
Fang, W., Riffat, S., & Wu, Y. (in press). Experimental investigation of evacuated heat pipe solar collector efficiency using phase-change fluid. International Journal of Low-Carbon Technologies, https://doi.org/10.1093/ijlct/ctx010

Performance of a microencapsulated phase-change material (PCM) as a heat-transport medium in an evacuated heat pipe solar collector was evaluated and the results compared with those using water. Collector efficiency was experimentally determined acco... Read More about Experimental investigation of evacuated heat pipe solar collector efficiency using phase-change fluid.

Using integrated parametric control to achieve better daylighting uniformity in an office room: a multi-Step comparison study (2017)
Journal Article
Eltaweel, A., & Su, Y. (2017). Using integrated parametric control to achieve better daylighting uniformity in an office room: a multi-Step comparison study. Energy and Buildings, 152, https://doi.org/10.1016/j.enbuild.2017.07.033

In addition to windows, louvers are the most common architectural elements widely used in office buildings to protect them from excessive daylight and improve daylight penetration as well. Advanced glazing, window blinds, other fenestration systems a... Read More about Using integrated parametric control to achieve better daylighting uniformity in an office room: a multi-Step comparison study.

Evaluation of the integration of the Wind-Induced Flutter Energy Harvester (WIFEH) into the built environment: experimental and numerical analysis (2017)
Journal Article
Aquino, A. I., Calautit, J. K., & Hughes, B. R. (2017). Evaluation of the integration of the Wind-Induced Flutter Energy Harvester (WIFEH) into the built environment: experimental and numerical analysis. Applied Energy, 207, https://doi.org/10.1016/j.apenergy.2017.06.041

With the ubiquity of low-powered technologies and devices in the urban environment operating in every area of human activity, the development and integration of a low-energy harvester suitable for smart cities applications is indispensable. The multi... Read More about Evaluation of the integration of the Wind-Induced Flutter Energy Harvester (WIFEH) into the built environment: experimental and numerical analysis.

A review and critique of UK housing stock energy models, modelling approaches and data sources (2017)
Journal Article
Sousa, G., Jones, B. M., Mirzaei, P. A., & Robinson, D. (2017). A review and critique of UK housing stock energy models, modelling approaches and data sources. Energy and Buildings, 151, https://doi.org/10.1016/j.enbuild.2017.06.043

The UK housing stock is responsible for some 27% of national energy demand and associated carbon dioxide emissions. 80% of this energy demand is due to heating (60%) and domestic hot water (20%), the former reflecting the poor average thermal integri... Read More about A review and critique of UK housing stock energy models, modelling approaches and data sources.

Effect of changing window type and ventilation strategy on indoor thermal environment of existing garment factories in Bangladesh (2017)
Journal Article
Hossain, M. M., Lau, B., Wilson, R., & Ford, B. (in press). Effect of changing window type and ventilation strategy on indoor thermal environment of existing garment factories in Bangladesh. Architectural Science Review, 60(4), https://doi.org/10.1080/00038628.2017.1337557

This paper presents two workable solutions that can significantly improve the indoor thermal environment within workspaces in existing ready-made garment (RMG) factories in the tropical climatic context of Bangladesh. The research involved field stud... Read More about Effect of changing window type and ventilation strategy on indoor thermal environment of existing garment factories in Bangladesh.

Overview of working fluids and sustainable heating, cooling and power generation technologies (2017)
Journal Article
Riffat, S., Aydin, D., Powell, R., & Yuan, Y. (2017). Overview of working fluids and sustainable heating, cooling and power generation technologies. International Journal of Low-Carbon Technologies, 12(4), https://doi.org/10.1093/ijlct/ctx008

Dependency on energy is much higher than the past and it is clear that energy is vital for a sustainable and safer future. Therefore, urgent solutions are required not only to increase share of renewable resources but also more efficient usage of fos... Read More about Overview of working fluids and sustainable heating, cooling and power generation technologies.

Satisfaction with indoor environmental quality in BREEAM and non-BREEAM certified office buildings (2017)
Journal Article
Altomonte, S., Saadouni, S., Kent, M. G., & Schiavon, S. (in press). Satisfaction with indoor environmental quality in BREEAM and non-BREEAM certified office buildings. Architectural Science Review, 60(4), https://doi.org/10.1080/00038628.2017.1336983

This paper presents preliminary analysis of occupant satisfaction with indoor environmental quality in Building Research Establishment Environmental Assessment Method (BREEAM) and non-BREEAM certified offices in the UK. Results from cross-sectional q... Read More about Satisfaction with indoor environmental quality in BREEAM and non-BREEAM certified office buildings.

Experimental study of an organic Rankine cycle system with radial inflow turbine and R123 (2017)
Journal Article
Shao, L., Zhu, J., Meng, X., Wei, X., & Ma, X. (2017). Experimental study of an organic Rankine cycle system with radial inflow turbine and R123. Applied Thermal Engineering, 124, https://doi.org/10.1016/j.applthermaleng.2017.06.042

A new micro radial inflow turbine is developed fora mini organic Rankine cycle (ORC) system in this study. With R123 as the working fluid, the turbine operational characteristics and performance are investigated by experiments. Based on the experimen... Read More about Experimental study of an organic Rankine cycle system with radial inflow turbine and R123.