All Outputs (176)

Thermophysical characteristics and application of metallic-oxide based mono and hybrid nanocomposite phase change materials for thermal management systems (2020)
Journal Article

This experimental study covers the chemical, physical, thermal characterization and application of novel nanocomposite phase change materials (NCPCMs) dispersed by TiO2, Al2O3, and CuO nanoparticles for thermal management systems. A commercial-grade... Read More about Thermophysical characteristics and application of metallic-oxide based mono and hybrid nanocomposite phase change materials for thermal management systems.

Magnetically-accelerated photo-thermal conversion and energy storage based on bionic porous nanoparticles (2020)
Journal Article

Effect of adding copper oxide nanoparticles on the mass/heat transfer in falling film absorption (2020)
Journal Article

Absorber is an essential component that affects the efficiency of absorption refrigeration unit. Falling film absorption is one of the most widespread forms of the heat/mass transfer in absorption system. In this paper, based on the software COMSOL M... Read More about Effect of adding copper oxide nanoparticles on the mass/heat transfer in falling film absorption.

Heat spreading performance of SiC-based power module with bonded vapour chamber for electric powertrain integration (2020)
Journal Article

After evolving side by side over the past three decades, insulated gate bipolar transistors (IGBTs) and metal–oxide–semiconductor field-effect transistor (MOSFETs) become two main options in high power semiconductor market of Hybrid Electric Vehicle... Read More about Heat spreading performance of SiC-based power module with bonded vapour chamber for electric powertrain integration.

A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage (2020)
Journal Article

Latent heat thermal energy storage (LHTES) uses phase change materials (PCMs) to store and release heat, and can effectively address the mismatch between energy supply and demand. However, it suffers from low thermal conductivity and the leakage prob... Read More about A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage.

Droplet Deposition Pattern Affected by Different Heating Directions (2020)
Journal Article

The coffee ring effect commonly exists in droplet deposition patterns, which fundamentally affects scientific research and industrial applications, like pharmaceutical purification, salt manufacturing, etc. Some researchers have tried different solut... Read More about Droplet Deposition Pattern Affected by Different Heating Directions.

A Study of the Truncated Square Pyramid Geometry for Enhancement of Super-hydrophobicity (2020)
Journal Article

Super-hydrophobic surfaces are quite common in nature, inspiring people to continually explore its water-repellence property and applications to our lives. It has been generally agreed that the property of super-hydrophobicity is mainly contributed b... Read More about A Study of the Truncated Square Pyramid Geometry for Enhancement of Super-hydrophobicity.

Investigation of Droplet Evaporation on Copper Substrate with Different Roughness (2020)
Journal Article

In the present study, we investigated the evaporation process and deposition pattern of saline droplet on a copper substrate with different roughness under 40 °C ambient temperature. These four substrates are classified as smooth surface and rough su... Read More about Investigation of Droplet Evaporation on Copper Substrate with Different Roughness.

Experimental analysis of a high temperature water heat pipe for thermal storage applications (2020)
Journal Article

Heat pipes spanning the 300 °C to 500 °C temperature range are still under research and development stage. Monel/water heat pipes have been previously explored as an option for operation up to 300 °C. Life tests of up to 30,000 h have shown good comp... Read More about Experimental analysis of a high temperature water heat pipe for thermal storage applications.

Transient simulation of finned heat sinks embedded with PCM for electronics cooling (2020)
Journal Article

This paper reports the two-dimensional (2D) transient numerical simulation of a phase change material (PCM) based finned heat sink to investigate the heat transfer performance for passive cooling of electronic devices. The finned heat sinks of 2 mm a... Read More about Transient simulation of finned heat sinks embedded with PCM for electronics cooling.

Synergetic treatment of dye contaminated wastewater using microparticles functionalized with carbon nanotubes/titanium dioxide nanocomposites (2020)
Journal Article

This journal is © The Royal Society of Chemistry. The highly efficient treatment of azo dye contaminated wastewater from the textile industry is an important but challenging problem. Herein, polydimethylsiloxane (PDMS) microparticles, incorporating m... Read More about Synergetic treatment of dye contaminated wastewater using microparticles functionalized with carbon nanotubes/titanium dioxide nanocomposites.

Preparation and characteristics evaluation of mono and hybrid nano-enhanced phase change materials (NePCMs) for thermal management of microelectronics (2020)
Journal Article

Efficient, clean and quiet thermal management has become a vital challenge in for cooling of electronic devices. To enhance the capability and efficiency of passive thermal management , novel composite materials have been designed by the combination... Read More about Preparation and characteristics evaluation of mono and hybrid nano-enhanced phase change materials (NePCMs) for thermal management of microelectronics.

Steady-state performance evaluation and energy assessment of a complete membrane-based liquid desiccant dehumidification system (2019)
Journal Article

A complete membrane-based liquid desiccant dehumidification system is investigated under the steady operating condition, which mainly consists of a dehumidifier, a regenerator, three heat exchangers, a cold and a hot water supply units. A finite diff... Read More about Steady-state performance evaluation and energy assessment of a complete membrane-based liquid desiccant dehumidification system.

Effects of rotation angle and metal foam on natural convection of nanofluids in a cavity under an adjustable magnetic field (2019)
Journal Article

© 2019 Elsevier Ltd To investigate the natural convection heat transfer of Fe3O4-water nanofluids in a rectangular cavity under an adjustable magnetic field, two experimental systems are established. Meanwhile, several factors, such as nanoparticle m... Read More about Effects of rotation angle and metal foam on natural convection of nanofluids in a cavity under an adjustable magnetic field.

Effects of turbulator with round hole on the thermo-hydraulic performance of nanofluids in a triangle tube (2019)
Journal Article

© 2019 Elsevier Ltd For investigating the thermal and hydraulic characteristics of water-based SiO2 nanofluids in a triangular tube with different turbulators, an experimental system has been designed and verified in this paper. The effects of differ... Read More about Effects of turbulator with round hole on the thermo-hydraulic performance of nanofluids in a triangle tube.

Experimental study on the flow and heat transfer characteristics of nanofluids in double-tube heat exchangers based on thermal efficiency assessment (2019)
Journal Article

Thermal performance and pressure drop of TiO2-H2O nanofluids in double-tube heat exchangers are investigated. The influence of the thermal fluid (water) volume flow rates (qv = 1–5 L/min), nanoparticle mass frictions (ω = 0.0%, 0.1%, 0.3% and 0.5%),... Read More about Experimental study on the flow and heat transfer characteristics of nanofluids in double-tube heat exchangers based on thermal efficiency assessment.

The micro?/nano?PCMs for thermal energy storage systems: A state of art review (2019)
Journal Article

With advancement in technology, the nanotechnology, various thermal energy storage (TES) materials have been invented and modified with promising thermal transport properties. The solid–liquid phase change materials (PCMs) have been extensively used... Read More about The micro?/nano?PCMs for thermal energy storage systems: A state of art review.

Effect of corrugation pitch on thermo-hydraulic performance of nanofluids in corrugated tubes of heat exchanger system based on exergy efficiency (2019)
Journal Article

© 2019 Elsevier Ltd In this article, water and TiO2-H2O nanofluids are used as heat exchange mediums. The heat transfer and resistance coefficient of corrugated tubes with different corrugation pitches are studied by experimental method. The economy... Read More about Effect of corrugation pitch on thermo-hydraulic performance of nanofluids in corrugated tubes of heat exchanger system based on exergy efficiency.

Performance of supersonic steam ejectors considering the nonequilibrium condensation phenomenon for efficient energy utilisation (2019)
Journal Article

Supersonic ejectors are of great interest for various industries as they can improve the quality of the low-grade heat source in an eco-friendly and sustainable way. However, the impact of steam condensation on the supersonic ejector performances is... Read More about Performance of supersonic steam ejectors considering the nonequilibrium condensation phenomenon for efficient energy utilisation.

Synthesis of microcapsules for carbon capture via needle-based droplet microfluidics (2019)
Journal Article

“Off-the-shelf” devices have attracted much consideration lately, especially in emulsions production in droplet-based microfluidics. While many simple and cost-effective designs have been proposed and demonstrated, the functionability of these purpor... Read More about Synthesis of microcapsules for carbon capture via needle-based droplet microfluidics.