All Outputs (7)

Evolution of Porosity in Suspension Thermal Sprayed YSZ Thermal Barrier Coatings through Neutron Scattering and Image Analysis Techniques (2021)
Journal Article
Tejero-Martin, D., Bai, M., Mata, J., & Hussain, T. (2021). Evolution of Porosity in Suspension Thermal Sprayed YSZ Thermal Barrier Coatings through Neutron Scattering and Image Analysis Techniques. Journal of the European Ceramic Society, 41(12), 6035-6048. https://doi.org/10.1016/j.jeurceramsoc.2021.04.020

Porosity is a key parameter on thermal barrier coatings, directly influencing thermal conductivity and strain tolerance. Suspension high velocity oxy-fuel (SHVOF) thermal spraying enables the use of sub-micron particles, increasing control over poros... Read More about Evolution of Porosity in Suspension Thermal Sprayed YSZ Thermal Barrier Coatings through Neutron Scattering and Image Analysis Techniques.

In-vitro cell interaction and apatite forming ability in simulated body fluid of ICIE16 and 13-93 bioactive glass coatings deposited by an emerging suspension high velocity oxy fuel (SHVOF) thermal spray (2020)
Journal Article
Bano, S., Romero, A. R., Grant, D., Nommeots-Nomm, A., Scotchford, C., Ahmed, I., & Hussain, T. (2021). In-vitro cell interaction and apatite forming ability in simulated body fluid of ICIE16 and 13-93 bioactive glass coatings deposited by an emerging suspension high velocity oxy fuel (SHVOF) thermal spray. Surface and Coatings Technology, 407, Article 126764. https://doi.org/10.1016/j.surfcoat.2020.126764

ICIE16 and 13-93 bioactive glasses have been proposed as alternative chemically stable compositions in physiological fluid keeping bioactivity comparable to Bioglass®. ICIE16 and 13-93 bioactive glasses coatings were produced via an emerging suspensi... Read More about In-vitro cell interaction and apatite forming ability in simulated body fluid of ICIE16 and 13-93 bioactive glass coatings deposited by an emerging suspension high velocity oxy fuel (SHVOF) thermal spray.

Experimental investigations on the chlorine-induced corrosion of HVOF thermal sprayed Stellite-6 and NiAl coatings with fluidised bed biomass/anthracite combustion systems (2020)
Journal Article
Chi, H., Pans, M. A., Bai, M., Sun, C., Hussain, T., Sun, W., …Liu, H. (2021). Experimental investigations on the chlorine-induced corrosion of HVOF thermal sprayed Stellite-6 and NiAl coatings with fluidised bed biomass/anthracite combustion systems. Fuel, 288, Article 119607. https://doi.org/10.1016/j.fuel.2020.119607

Stellite-6 (Co-based) and NiAl coatings (Ni-based) were deposited via HVOF spraying onto 304 stainless steels and tested in a 20 kWth biomass fired bubbling fluidised bed (BFB) combustor for 20 hours and an industrial scale anthracite fired CFB boile... Read More about Experimental investigations on the chlorine-induced corrosion of HVOF thermal sprayed Stellite-6 and NiAl coatings with fluidised bed biomass/anthracite combustion systems.

A high-fidelity simulation of the primary breakup within suspension high velocity oxy fuel thermal spray using a coupled volume of fluid and discrete phase model (2020)
Journal Article
Chadha, S., Jefferson-Loveday, R., & Hussain, T. (2020). A high-fidelity simulation of the primary breakup within suspension high velocity oxy fuel thermal spray using a coupled volume of fluid and discrete phase model. International Journal of Multiphase Flow, 133, Article 103445. https://doi.org/10.1016/j.ijmultiphaseflow.2020.103445

A novel approach to incorporate graphene nanoplatelets to Cr2O3 for low-wear coatings (2020)
Journal Article
Venturi, F., Pulsford, J., & Hussain, T. (2020). A novel approach to incorporate graphene nanoplatelets to Cr2O3 for low-wear coatings. Materials Letters, 276, Article 128283. https://doi.org/10.1016/j.matlet.2020.128283

© 2020 Cr2O3 (chromia) coatings have been widely used in wear and corrosion resistant applications thanks to their good tribomechanical properties, and graphene nanoplatelets (GNPs) have been employed as nanofillers to further improve these propertie... Read More about A novel approach to incorporate graphene nanoplatelets to Cr2O3 for low-wear coatings.

Sliding wear behaviour of WC-Co reinforced NiCrFeSiB HVOAF thermal spray coatings against WC-Co and Al2O3 counterbodies (2020)
Journal Article
Pulsford, J., Venturi, F., Kamnis, S., & Hussain, T. (2020). Sliding wear behaviour of WC-Co reinforced NiCrFeSiB HVOAF thermal spray coatings against WC-Co and Al2O3 counterbodies. Surface and Coatings Technology, 386, Article 125468. https://doi.org/10.1016/j.surfcoat.2020.125468

© 2020 The Authors NiCrFeSiB alloys reinforced with WC-Co are potentially useful composite coating materials for use in applications in which resistance to sliding wear, hot corrosion and high temperature is required. Furthermore these materials offe... Read More about Sliding wear behaviour of WC-Co reinforced NiCrFeSiB HVOAF thermal spray coatings against WC-Co and Al2O3 counterbodies.

The role of microstructural development in the hydrothermal corrosion of cast and HIPed Stellite 6 analogues in simulated PWR conditions (2019)
Journal Article
Karimi, G., Carrington, M., Thomas, J., Shipway, P., Stewart, D., & Hussain, T. (2019). The role of microstructural development in the hydrothermal corrosion of cast and HIPed Stellite 6 analogues in simulated PWR conditions. Corrosion Science, 159, Article 108141. https://doi.org/10.1016/j.corsci.2019.108141

The corrosion behaviour of cast and HIPed Stellite 6 analogue materials in PWR-simulating conditions was investigated. The cast alloy exhibited localised corrosion at the boundary between the matrix and the M7C3 carbides, with this being attributed t... Read More about The role of microstructural development in the hydrothermal corrosion of cast and HIPed Stellite 6 analogues in simulated PWR conditions.