All Outputs (49)

Universal mobility characteristics of graphene originating from charge scattering by ionised impurities (2021)
Journal Article
Gosling, J. H., Makarovsky, O., Wang, F., Cottam, N. D., Greenaway, M. T., Patanè, A., …Fromhold, T. M. (2021). Universal mobility characteristics of graphene originating from charge scattering by ionised impurities. Communications Physics, 4(1), Article 30. https://doi.org/10.1038/s42005-021-00518-2

Pristine graphene and graphene-based heterostructures can exhibit exceptionally high electron mobility if their surface contains few electron-scattering impurities. Mobility directly influences electrical conductivity and its dependence on the carrie... Read More about Universal mobility characteristics of graphene originating from charge scattering by ionised impurities.

Additively manufactured ultra-high vacuum chamber for portable quantum technologies (2021)
Journal Article
Cooper, N., Coles, L., Everton, S., Maskery, I., Campion, R., Madkhaly, S., …Hackermüller, L. (2021). Additively manufactured ultra-high vacuum chamber for portable quantum technologies. Additive Manufacturing, 40, Article 101898. https://doi.org/10.1016/j.addma.2021.101898

© 2021 Additive manufacturing is having a dramatic impact on research and industry across multiple sectors, but the production of additively manufactured systems for ultra-high vacuum applications has so far proved elusive and widely been considered... Read More about Additively manufactured ultra-high vacuum chamber for portable quantum technologies.

3D printed polymeric drug-eluting implants (2021)
Journal Article
Liaskoni, A., Wildman, R. D., & Roberts, C. J. (2021). 3D printed polymeric drug-eluting implants. International Journal of Pharmaceutics, 597, Article 120330. https://doi.org/10.1016/j.ijpharm.2021.120330

An extrusion-based 3D printer has been used for the manufacturing of sustained drug release poly(ε-caprolactone) (PCL) implants. Such implants can address issues of reduced patient compliance due to the necessary frequent administration of convention... Read More about 3D printed polymeric drug-eluting implants.

Author Correction: Design of highly stabilized nanocomposite inks based on biodegradable polymer-matrix and gold nanoparticles for Inkjet Printing (2020)
Journal Article
Begines, B., Alcudia, A., Aguilera-Velazquez, R., Martinez, G., He, Y., Trindade, G. F., …Prado-Gotor, R. (2020). Author Correction: Design of highly stabilized nanocomposite inks based on biodegradable polymer-matrix and gold nanoparticles for Inkjet Printing. Scientific Reports, 10, Article 19793. https://doi.org/10.1038/s41598-020-76435-1

Challenges and approaches in assessing the interplay between microorganisms and their physical micro-environments (2020)
Journal Article
Harvey, H. J., Wildman, R. D., Mooney, S. J., & Avery, S. V. (2020). Challenges and approaches in assessing the interplay between microorganisms and their physical micro-environments. Computational and Structural Biotechnology Journal, 18, 2860-2866. https://doi.org/10.1016/j.csbj.2020.09.030

© 2020 The Author(s) Spatial structure over scales ranging from nanometres to centimetres (and beyond) varies markedly in diverse habitats and the industry-relevant settings that support microbial activity. Developing an understanding of the interpla... Read More about Challenges and approaches in assessing the interplay between microorganisms and their physical micro-environments.

A Click Chemistry Strategy for the Synthesis of Efficient Photoinitiators for Two‐Photon Polymerization (2020)
Journal Article
Henning, I., Woodward, A. W., Rance, G. A., Paul, B. T., Wildman, R. D., Irvine, D. J., & Moore, J. C. (2020). A Click Chemistry Strategy for the Synthesis of Efficient Photoinitiators for Two‐Photon Polymerization. Advanced Functional Materials, 30(50), Article 2006108. https://doi.org/10.1002/adfm.202006108

It is reported that efficient photoinitiators, suitable for two‐photon polymerization, can be obtained using the copper catalyzed azide/alkyne cycloaddition reaction. This click chemistry strategy provides a modular approach to the assembly of photoi... Read More about A Click Chemistry Strategy for the Synthesis of Efficient Photoinitiators for Two‐Photon Polymerization.

Inkjet based 3D Printing of bespoke medical devices that resist bacterial biofilm formation (2020)
Preprint / Working Paper
He, Y., Begines, B., Luckett, J., Dubern, J., Hook, A., Prina, E., …Wildman, R. D. Inkjet based 3D Printing of bespoke medical devices that resist bacterial biofilm formation

We demonstrate the formulation of advanced functional 3D printing inks that prevent the formation of bacterial biofilms in vivo. Starting from polymer libraries, we show that a biofilm resistant object can be 3D printed with the potential for shape a... Read More about Inkjet based 3D Printing of bespoke medical devices that resist bacterial biofilm formation.

Soil aggregates by design: Manufactured aggregates with defined microbial composition for interrogating microbial activities in soil microhabitats (2020)
Journal Article
Harvey, H. J., Wildman, R. D., Mooney, S. J., & Avery, S. V. (2020). Soil aggregates by design: Manufactured aggregates with defined microbial composition for interrogating microbial activities in soil microhabitats. Soil Biology and Biochemistry, 148, Article 107870. https://doi.org/10.1016/j.soilbio.2020.107870

Differences in the structure of microbial communities are reported to exist between the inside and outside of soil aggregates, but the impacts of soil aggregation on microbial activity in soils, essential for soil health, have proven difficult to stu... Read More about Soil aggregates by design: Manufactured aggregates with defined microbial composition for interrogating microbial activities in soil microhabitats.

Design of highly stabilized nanocomposite inks based on biodegradable polymer-matrix and gold nanoparticles for Inkjet Printing (2019)
Journal Article
Begines, B., Alcudia, A., Aguilera-Velazquez, R., Martinez, G., He, Y., Wildman, R., …Prado-Gotor, R. (2019). Design of highly stabilized nanocomposite inks based on biodegradable polymer-matrix and gold nanoparticles for Inkjet Printing. Scientific Reports, 9, Article 16097. https://doi.org/10.1038/s41598-019-52314-2

Nowadays there is a worldwide growing interest in the Inkjet Printing technology owing to its potentially high levels of geometrical complexity, personalization and resolution. There is also social concern about usage, disposal and accumulation of pl... Read More about Design of highly stabilized nanocomposite inks based on biodegradable polymer-matrix and gold nanoparticles for Inkjet Printing.

Simultaneous Tracking of Pseudomonas aeruginosa motility in liquid and at the Solid-Liquid Interface Reveals Differential Roles for the Flagellar Stators (2019)
Journal Article
Hook, A. L., Flewellen, J. L., Dubern, J.-F., Carabelli, A., Zald, I. M., Berry, R. M., …Alexander, M. R. (2019). Simultaneous Tracking of Pseudomonas aeruginosa motility in liquid and at the Solid-Liquid Interface Reveals Differential Roles for the Flagellar Stators. mSystems, 4(5), Article e00390-19. https://doi.org/10.1128/mSystems.00390-19

Bacteria sense chemicals, surfaces, and other cells and move toward some and away from others. Studying how single bacterial cells in a population move requires sophisticated tracking and imaging techniques. We have established quantitative methodolo... Read More about Simultaneous Tracking of Pseudomonas aeruginosa motility in liquid and at the Solid-Liquid Interface Reveals Differential Roles for the Flagellar Stators.

Water-Based 3D Inkjet Printing of an Oral Pharmaceutical Dosage Form (2019)
Journal Article
Cader, H. K., Rance, G. A., Alexander, M. R., Gonçalves, A. D., Roberts, C. J., Tuck, C. J., & Wildman, R. D. (2019). Water-Based 3D Inkjet Printing of an Oral Pharmaceutical Dosage Form. International Journal of Pharmaceutics, 564, 359-368. https://doi.org/10.1016/j.ijpharm.2019.04.026

Inkjet printing is a form of additive manufacturing where liquid droplets are selectively deposited onto a substrate followed by solidification. The process provides significant potential advantages for producing solid oral dosage forms or tablets, i... Read More about Water-Based 3D Inkjet Printing of an Oral Pharmaceutical Dosage Form.

Lipids and polymers in pharmaceutical technology: lifelong companions (2019)
Journal Article
Siepmann, J., Faham, A., Clas, S.-D., Boyd, B. J., Jannin, V., Bernkop-Schnürch, A., …Leroux, J.-C. (2019). Lipids and polymers in pharmaceutical technology: lifelong companions. International Journal of Pharmaceutics, 558, 128-142. https://doi.org/10.1016/j.ijpharm.2018.12.080

In pharmaceutical technology, lipids and polymers are considered pillar excipients for the fabrication of most dosage forms, irrespective of the administration route. They play various roles ranging from support vehicles to release rate modifiers, st... Read More about Lipids and polymers in pharmaceutical technology: lifelong companions.

Geometrical effects on residual stress in selective laser melting (2018)
Journal Article
Parry, L., Ashcroft, I., & Wildman, R. (2019). Geometrical effects on residual stress in selective laser melting. Additive Manufacturing, 25, 166-175. https://doi.org/10.1016/j.addma.2018.09.026

Selective laser melting is an increasingly attractive technology for the manufacture of complex and low volume / high value metal parts. However, the inevitable residual stresses that are generated can lead to defects or build failure. Due to the com... Read More about Geometrical effects on residual stress in selective laser melting.

Using total specific cost indices to compare the cost performance of additive manufacturing for the medical devices domain (2018)
Journal Article
Baumers, M., Wildman, R., Wallace, M., Yoo, J., Blackwell, B., Farr, P., & Roberts, C. J. (2018). Using total specific cost indices to compare the cost performance of additive manufacturing for the medical devices domain. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1-15. https://doi.org/10.1177/0954405418774591

The label additive manufacturing, also known as three-dimensional printing, serves as an umbrella term for a number of technologies designed to deposit product geometries directly from build materials and digital design information. However, as a rel... Read More about Using total specific cost indices to compare the cost performance of additive manufacturing for the medical devices domain.

3D reactive inkjet printing of polydimethylsiloxane (2017)
Journal Article
Sturgess, C., Tuck, C. J., Ashcroft, I. A., & Wildman, R. D. (2017). 3D reactive inkjet printing of polydimethylsiloxane. Journal of Materials Chemistry C, 5(37), 9733-9745. https://doi.org/10.1039/c7tc02412f

© 2017 The Royal Society of Chemistry. Material jetting is a process whereby liquid material can be deposited onto a substrate to solidify. Through a process of progressive additional layers, this deposition can then be used to produce 3D structures.... Read More about 3D reactive inkjet printing of polydimethylsiloxane.

Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM (2017)
Journal Article
Lemke, J., Simonelli, M., Garibaldi, M., Ashcroft, I., Hague, R., Vedani, M., …Tuck, C. (2017). Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM. Journal of Alloys and Compounds, 722, 293-301. https://doi.org/10.1016/j.jallcom.2017.06.085

Innovative Additive Manufacturing (AM) technologies like Selective Laser Melting (SLM) could prove to be efficient for the processing of brittle silicon steel (Fe-Si) with high silicon content. This research elucidates the effects of heat-treatment o... Read More about Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM.

3D microfabricated scaffolds and microfluidic devices for ocular surface replacement: a review (2017)
Journal Article
Prina, E., Mistry, P., Sidney, L. E., Yang, J., Wildman, R. D., Bertolin, M., …Rose, F. R. A. (2017). 3D microfabricated scaffolds and microfluidic devices for ocular surface replacement: a review. Stem Cell Reviews and Reports, 13(3), 430-441. https://doi.org/10.1007/s12015-017-9740-6

In recent years, there has been increased research interest in generating corneal substitutes, either for use in the clinic or as in vitro corneal models. The advancement of 3D microfabrication technologies has allowed the reconstruction of the nativ... Read More about 3D microfabricated scaffolds and microfluidic devices for ocular surface replacement: a review.

A novel approach to design lesion-specific stents for minimum recoil (2016)
Journal Article
Farhan Khan, M., Brackett, D., Ashcroft, I., Tuck, C., & Wildman, R. D. (in press). A novel approach to design lesion-specific stents for minimum recoil. Journal of Medical Devices, 11(1), Article 011001. https://doi.org/10.1115/1.4034880

Stent geometries are obtained by topology optimization for minimized compliance under different stenosis levels and plaque material types. Three levels of stenosis by cross-sectional area, i.e., 30%, 40%, and 50% and three different plaque material p... Read More about A novel approach to design lesion-specific stents for minimum recoil.

A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale (2016)
Journal Article
Chen, X., Ashcroft, I., Wildman, R. D., & Tuck, C. (2017). A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale. International Journal of Solids and Structures, 104-105, 25-34. https://doi.org/10.1016/j.ijsolstr.2016.11.004

Material properties such as hardness can be dependent on the size of the indentation load when that load is small, a phenomenon known as the indentation size effect (ISE). In this work an inverse finite element method (IFEM) is used to investigate th... Read More about A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale.

The UK National Quantum Technologies Hub in sensors and metrology (Keynote Paper) (2016)
Presentation / Conference Contribution
Bongs, K., Boyer, V., Cruise, M., Freise, A., Holynski, M., Hughes, J., Kaushik, A., Lien, Y.-H., Niggebaum, A., Perea-Ortiz, M., Petrov, P., Plant, S., Singh, Y., Stabrawa, A., Paul, D., Sorel, M., Cumming, D., Marsh, J., Bowtell, R. W., Bason, M., …John, P. (2016, April). The UK National Quantum Technologies Hub in sensors and metrology (Keynote Paper). Presented at SPIE Photonics Europe, 2016, Brussels, Belgium

The UK National Quantum Technology Hub in Sensors and Metrology is one of four flagship initiatives in the UK National of Quantum Technology Program. As part of a 20-year vision it translates laboratory demonstrations to deployable practical devices,... Read More about The UK National Quantum Technologies Hub in sensors and metrology (Keynote Paper).