All Outputs (120)

Low thermal expansion machine frame designs using lattice structures (2021)
Journal Article

In this work, we investigated tessellating cellular (or lattice) structures for use in a low thermal expansion machine frame. We proposed a concept for a lattice structure with tailorable effective coefficient of thermal expansion (CTE). The design i... Read More about Low thermal expansion machine frame designs using lattice structures.

Finite element modelling of defects in additively manufactured strut-based lattice structures (2021)
Journal Article

Strut-based lattice structures produced by powder bed fusion are prone to characteristic manufacturing defects that alter both their form and surface texture. Most studies in the literature focus on a subset of commonly observed defects, typically ra... Read More about Finite element modelling of defects in additively manufactured strut-based lattice structures.

Efficient empirical determination of maximum permissible error in coordinate metrology (2021)
Journal Article

Maximum permissible errors (MPEs) are an important measurement system specification and form the basis of periodic verification of a measurement system's performance. However, there is no standard methodology for determining MPEs, so when they are no... Read More about Efficient empirical determination of maximum permissible error in coordinate metrology.

Evaluating and propagating uncertainty in digital fringe projection systems (2021)
Journal Article

Fringe projection is a measurement technique able to produce high-density data measurements of Lambertian surfaces using a camera and projector. Evaluating the uncertainty of a fringe projection system is challenging because of the highdensity and th... Read More about Evaluating and propagating uncertainty in digital fringe projection systems.

Physics-based virtual coherence scanning interferometer for surface measurement (2021)
Journal Article

Virtual instruments provide task-specific uncertainty evaluation in surface and dimensional metrology. We demonstrate the first virtual coherence scanning interferometer that can accurately predict the results from measurements of surfaces with compl... Read More about Physics-based virtual coherence scanning interferometer for surface measurement.

Analysis of the tribological interaction of a polytetrafluoroethylene-lined radial lip oil seal, shaft and lubricant sample (2021)
Journal Article

To investigate the tribological interaction and wear mechanisms of polytetrafluoroethylene-lined radial lip oil seals in service, a sleeve, seal and lubricant sample taken off a rotating rig are studied. The test was terminated at 72 h, after severe... Read More about Analysis of the tribological interaction of a polytetrafluoroethylene-lined radial lip oil seal, shaft and lubricant sample.

Evaluating the cytotoxicity of Ge–Sb–Se chalcogenide glass optical fibres on 3T3 mouse fibroblasts (2021)
Journal Article

In vivo cancer detection based on the mid-infrared molecular fingerprint of tissue is promising for the fast diagnosis and treatment of suspected cancer patients. Few materials are mid-infrared transmissive, even fewer, which can be converted into fu... Read More about Evaluating the cytotoxicity of Ge–Sb–Se chalcogenide glass optical fibres on 3T3 mouse fibroblasts.

Characterisation of a multi-view fringe projection system based on the stereo matching of rectified phase maps (2021)
Journal Article

Multi-view fringe projection systems can be effective solutions to address the limitations imposed by the limited field of view, line-of-sight issues and occlusions when measuring the geometry of complex objects, associated with single camera-projec... Read More about Characterisation of a multi-view fringe projection system based on the stereo matching of rectified phase maps.

Scattering and three-dimensional imaging in surface topography measuring interference microscopy (2021)
Journal Article

Statistical point cloud model to investigate measurement uncertainty in coordinate metrology (2021)
Journal Article

In this work an approach to investigate measurement uncertainty in coordinate metrology is presented, based on fitting Gaussian random fields to high-density point clouds produced by measurement repeats. The fitted field delivers a depiction of the s... Read More about Statistical point cloud model to investigate measurement uncertainty in coordinate metrology.

Real-time target alignment system for high-power high-repetition rate laser operations using a five degree-of-freedom hybrid mechanism (2020)
Journal Article

This paper presents a real-time position control solution for the targets used in the high-repetition rate laser operations of large-scale high-power laser facilities. The design of the control system is based on an Abbe-compliant, in-process positio... Read More about Real-time target alignment system for high-power high-repetition rate laser operations using a five degree-of-freedom hybrid mechanism.

Mathematical approach to the validation of surface texture filtration software (2020)
Journal Article

A novel method for the validation of surface texture filtration software is introduced. Mathematically traceable reference pairs for linear Gaussian filtration are developed, utilising Fourier series surface definitions in conjunction with the freque... Read More about Mathematical approach to the validation of surface texture filtration software.

Mathematical approach to the validation of form removal surface texture software (2020)
Journal Article

A new approach to the validation of surface texture form removal methods is introduced. A linear algebra technique is presented that obtains total least squares (TLS) model fits for a continuous mathematical surface definition. This model is applicab... Read More about Mathematical approach to the validation of form removal surface texture software.

Optimisation of camera positions for optical coordinate measurement based on visible point analysis (2020)
Journal Article

In optical coordinate measurement using cameras, the number of images, and positions and orientations of the cameras, are critical to object accessibility and the accuracy of a measurement. In this paper, we propose a technique to optimise the number... Read More about Optimisation of camera positions for optical coordinate measurement based on visible point analysis.

Surface-process correlation for an ink-jet printed transparent fluoroplastic (2020)
Journal Article

Ink-jet printing is one of the key technologies in the field of defined polymer deposition. There is currently a lack of knowledge regarding how some fluoropolymers, in this case THV 221, can be ink-jet printed. A quantitative analysis of the micro-s... Read More about Surface-process correlation for an ink-jet printed transparent fluoroplastic.

Review of the influence of noise in X-ray computed tomography measurement uncertainty (2020)
Journal Article

Different aspects of noise in X-ray computed tomography (XCT) for industrial purposes are examined. An overview of the most common noise metrics is given, together with a description of XCT noise influence quantities. We address the current state of... Read More about Review of the influence of noise in X-ray computed tomography measurement uncertainty.

Measurement of complex freeform additively manufactured parts by structured light and photogrammetry (2020)
Journal Article

Feature-based characterisation of Ti6Al4V electron beam powder bed fusion surfaces fabricated at different surface orientations (2020)
Journal Article

Due to the layer-based nature of the powder bed fusion (PBF) process, part surfaces oriented in space at varying angles with respect to the build direction are differently affected by a wide array of manufacturing-induced phenomena (staircase effects... Read More about Feature-based characterisation of Ti6Al4V electron beam powder bed fusion surfaces fabricated at different surface orientations.

Ceria-coated replicated aluminium sponges as catalysts for the CO-water gas shift process (2020)
Journal Article

A study on the use of chemical conversion coating as a preparative technique for foam-based structured catalysts, in the water gas shift reaction, is presented. The results showed a significant correlation between the textural properties of the struc... Read More about Ceria-coated replicated aluminium sponges as catalysts for the CO-water gas shift process.

Volumetric error modelling of a stereo vision system for error correction in photogrammetric three-dimensional coordinate metrology (2020)
Journal Article

Optical three-dimensional coordinate measurement using stereo vision has systematic errors that affect measurement quality. This paper presents a scheme for measuring, modelling and correcting these errors. The position and orientation of a linear st... Read More about Volumetric error modelling of a stereo vision system for error correction in photogrammetric three-dimensional coordinate metrology.