All Outputs (10)

Effects of defocus on the transfer function of coherence scanning interferometry (2017)
Journal Article
Su, R., Thomas, M., Leach, R., & Coupland, J. (2017). Effects of defocus on the transfer function of coherence scanning interferometry. Optics Letters, 43(1), https://doi.org/10.1364/OL.43.000082

Coherence scanning interferometry (CSI) offers three dimensional (3D) measurement of surface topography with high precision and accuracy. Defocus within the interferometric objective lens, however, is commonly present in CSI measurements, and reduces... Read More about Effects of defocus on the transfer function of coherence scanning interferometry.

Feature-based characterisation of signature topography in laser powder bed fusion of metals (2017)
Journal Article
Senin, N., Thompson, A., & Leach, R. K. (2018). Feature-based characterisation of signature topography in laser powder bed fusion of metals. Measurement Science and Technology, 29(4), Article 045009. https://doi.org/10.1088/1361-6501/aa9e19

The use of state-of-the-art areal topography measurement instrumentation allows for a high level of detail in the acquisition of topographic information at micrometric scales. The three-dimensional geometric models of surface topography obtained from... Read More about Feature-based characterisation of signature topography in laser powder bed fusion of metals.

Flexible decoupled camera and projector fringe projection system using inertial sensors (2017)
Journal Article
Stavroulakis, P., Sims-Waterhouse, D., Piano, S., & Leach, R. K. (in press). Flexible decoupled camera and projector fringe projection system using inertial sensors. Optical Engineering, 56(10), https://doi.org/10.1117/1.OE.56.10.104106

Measurement of objects with complex geometry and many self occlusions is increasingly important in many fields, including additive manufacturing. In a fringe projection system, the camera and the projector cannot move independently with respect to ea... Read More about Flexible decoupled camera and projector fringe projection system using inertial sensors.

Design and analysis of strut-based lattice structures for vibration isolation (2017)
Journal Article
Syam, W. P., Jianwei, W., Zhao, B., Maskery, I., Elmadih, W., & Leach, R. (2018). Design and analysis of strut-based lattice structures for vibration isolation. Precision Engineering, 51, 494-506. https://doi.org/10.1016/j.precisioneng.2017.09.010

This paper presents the design, analysis and experimental verification of strut-based lattice structures to enhance the mechanical vibration isolation properties of a machine frame, whilst also conserving its structural integrity. In addition, design... Read More about Design and analysis of strut-based lattice structures for vibration isolation.

High-precision lateral distortion measurement and correction in coherence scanning interferometry using an arbitrary surface (2017)
Journal Article
Ekberg, P., Su, R., & Leach, R. K. (2017). High-precision lateral distortion measurement and correction in coherence scanning interferometry using an arbitrary surface. Optics Express, 25(16), https://doi.org/10.1364/OE.25.018703

Lateral optical distortion is present in most optical imaging systems. In coherence scanning interferometry, distortion may cause field-dependent systematic errors in the measurement of surface topography. These errors become critical when high-preci... Read More about High-precision lateral distortion measurement and correction in coherence scanning interferometry using an arbitrary surface.

Optimization of surface measurement for metal additive manufacturing using coherence scanning interferometry (2017)
Journal Article
Gomez, C., Su, R., Thompson, A., DiSciacca, J., Lawes, S., & Leach, R. K. (2017). Optimization of surface measurement for metal additive manufacturing using coherence scanning interferometry. Optical Engineering, 56(11), 1-8. https://doi.org/10.1117/1.OE.56.11.111714

Surface topography measurement for metal additive manufacturing (AM) is a challenging task for contact and non-contact methods. In this paper, we present an experimental investigation of the use of coherence scanning interferometry (CSI) for measurem... Read More about Optimization of surface measurement for metal additive manufacturing using coherence scanning interferometry.

An analysis of type F2 software measurement standards for profile surface texture parameters (2017)
Journal Article
Todhunter, L. D., Leach, R. K., Lawes, S., & Blateyron, F. (2017). An analysis of type F2 software measurement standards for profile surface texture parameters. Measurement Science and Technology, 28(6), Article 065017. https://doi.org/10.1088/1361-6501/aa6924

This paper reports on an in-depth analysis of ISO 5436 part 2 type F2 reference software for the calculation of profile surface texture parameters that has been performed on the input, implementation and output results of the reference software devel... Read More about An analysis of type F2 software measurement standards for profile surface texture parameters.

Topography of selectively laser melted surfaces: A comparison of different measurement methods (2017)
Journal Article
Thompson, A., Senin, N., Giusca, C. L., & Leach, R. K. (2017). Topography of selectively laser melted surfaces: A comparison of different measurement methods. CIRP Annals - Manufacturing Technology, 66(1), 543-546. https://doi.org/10.1016/j.cirp.2017.04.075

Selective laser melting (SLM) of metals produces surface topographies that are challenging to measure. Multiple areal surface topography measurement technologies are available, which allow reconstruction of information rich, three-dimensional digital... Read More about Topography of selectively laser melted surfaces: A comparison of different measurement methods.

On tilt and curvature dependent errors and the calibration of coherence scanning interferometry (2017)
Journal Article
Su, R., Wang, Y., Coupland, J., & Leach, R. K. (in press). On tilt and curvature dependent errors and the calibration of coherence scanning interferometry. Optics Express, 25(4), https://doi.org/10.1364/OE.25.003297

Although coherence scanning interferometry (CSI) is capable of measuring surface topography with sub-nanometre precision, it is well known that the performance of measuring instruments depends strongly on the local tilt and curvature of the sample su... Read More about On tilt and curvature dependent errors and the calibration of coherence scanning interferometry.

Combined inkjet printing and infrared sintering of silver nanoparticles using a swathe-by-swathe and layer-by-layer approach for 3-dimensional structures (2017)
Journal Article
Vaithilingam, J., Simonelli, M., Saleh, E., Senin, N., Wildman, R. D., Hague, R. J. M., …Tuck, C. J. (2017). Combined inkjet printing and infrared sintering of silver nanoparticles using a swathe-by-swathe and layer-by-layer approach for 3-dimensional structures. ACS Applied Materials and Interfaces, 9(7), 6560-6570. https://doi.org/10.1021/acsami.6b14787

Despite the advancement of additive manufacturing (AM)/3-dimensional (3D) printing, single-step fabrication of multifunctional parts using AM is limited. With the view of enabling multifunctional AM (MFAM), in this study, sintering of metal nanoparti... Read More about Combined inkjet printing and infrared sintering of silver nanoparticles using a swathe-by-swathe and layer-by-layer approach for 3-dimensional structures.