All Outputs (88)

Design Framework for Multifunctional Additive Manufacturing: Placement and Routing of Three-Dimensional Printed Circuit Volumes (2015)
Journal Article
Panesar, A., Brackett, D., Ashcroft, I., Wildman, R. D., & Hague, R. J. (2015). Design Framework for Multifunctional Additive Manufacturing: Placement and Routing of Three-Dimensional Printed Circuit Volumes. Journal of Mechanical Design, 137(11), Article 111414. https://doi.org/10.1115/1.4030996

© 2015 by ASME. A framework for the design of additively manufactured (AM) multimaterial parts with embedded functional systems is presented (e.g., structure with electronic/electrical components and associated conductive paths). Two of the key stran... Read More about Design Framework for Multifunctional Additive Manufacturing: Placement and Routing of Three-Dimensional Printed Circuit Volumes.

Mechanical Properties of Ti-6Al-4V Selectively Laser Melted Parts with Body-Centred-Cubic Lattices of Varying cell size (2015)
Journal Article
Maskery, I., Aremu, A., Simonelli, M., Tuck, C., Wildman, R., Ashcroft, I., & Hague, R. (2015). Mechanical Properties of Ti-6Al-4V Selectively Laser Melted Parts with Body-Centred-Cubic Lattices of Varying cell size. Experimental Mechanics, 55(7), 1261-1272. https://doi.org/10.1007/s11340-015-0021-5

Significant weight savings in parts can be made through the use of additive manufacture (AM), a process which enables the construction of more complex geometries, such as functionally graded lattices, than can be achieved conventionally. The existing... Read More about Mechanical Properties of Ti-6Al-4V Selectively Laser Melted Parts with Body-Centred-Cubic Lattices of Varying cell size.

The cost of additive manufacturing: machine productivity, economies of scale and technology-push (2015)
Journal Article
Baumers, M., Dickens, P., Tuck, C., & Hague, R. (2016). The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technological Forecasting and Social Change, 102, https://doi.org/10.1016/j.techfore.2015.02.015

As part of the cosmos of digital fabrication technology, Additive Manufacturing (AM) systems are able to manufacture three-dimensional components and products directly from raw material and 3D design data. The layer-by-layer operating process of thes... Read More about The cost of additive manufacturing: machine productivity, economies of scale and technology-push.

A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V (2015)
Journal Article
Hague, R., Tuck, C., Simonelli, M., Tuck, C., Aboulkhair, N. T., Maskery, I., …Hague, R. J. (2015). A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V. Metallurgical and Materials Transactions A, 46(9), 3842-3851. https://doi.org/10.1007/s11661-015-2882-8

The creation of an object by selective laser melting (SLM) occurs by melting contiguous areas of a powder bed according to a corresponding digital model. It is therefore clear that the success of this metal Additive Manufacturing (AM) technology reli... Read More about A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V.

Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound (2014)
Journal Article
Vaithilingam, J., Kilsby, S., Goodridge, R. D., Christie, S. D., Edmondson, S., & Hague, R. J. (2015). Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound. Materials Science and Engineering: C, 46, 52-61. https://doi.org/10.1016/j.msec.2014.10.015

Surface modification of an implant with a biomolecule is used to improve its biocompatibility and to reduce post-implant complications. In this study, a novel approach has been used to functionalise phosphonic acid monolayers with a drug. Ti6Al4V com... Read More about Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound.

Aging behavior of thermoplastic elastomers in the laser sintering process (2014)
Journal Article
Ziegelmeier, S., Wöllecke, F., Tuck, C. J., Goodridge, R. D., & Hague, R. J. (2014). Aging behavior of thermoplastic elastomers in the laser sintering process. Journal of Materials Research, 29(17), 1841-1851. https://doi.org/10.1557/jmr.2014.172

It is known that polymers used in laser sintering (LS) change their intrinsic properties due to processing conditions that are close to the crystalline melting temperature. This paper evaluates the aging behavior of a thermoplastic polyurethane powde... Read More about Aging behavior of thermoplastic elastomers in the laser sintering process.

An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties (2014)
Journal Article
Ziegelmeier, S., Christou, P., Wöllecke, F., Tuck, C., Goodridge, R. D., Hague, R. J., …Wintermantel, E. (2015). An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties. Journal of Materials Processing Technology, 215, https://doi.org/10.1016/j.jmatprotec.2014.07.029

The properties of parts manufactured by laser sintering (LS) are, amongst others, influenced by the packing and flow efficiencies of the powders being processed. In particular, this study investigated the influence of the bulk and flow characteris... Read More about An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties.

An error diffusion based method to generate functionally graded cellular structures (2014)
Journal Article
Brackett, D., Ashcroft, I., Wildman, R., & Hague, R. J. (2014). An error diffusion based method to generate functionally graded cellular structures. Computers and Structures, 138, https://doi.org/10.1016/j.compstruc.2014.03.004

The spatial variation of cell size in a functionally graded cellular structure is achieved using error diffusion to convert a continuous tone image into binary form. Effects of two control parameters, greyscale value and resolution on the resulting c... Read More about An error diffusion based method to generate functionally graded cellular structures.