All Outputs (16)

A Topology-Morphing Series Resonant Converter for Photovoltaic Module Applications (2022)
Presentation / Conference Contribution
Sergentanis, G., De Lillo, L., Empringham, L., & Johnson, C. M. (2022). A Topology-Morphing Series Resonant Converter for Photovoltaic Module Applications. In 2022 24th European Conference on Power Electronics and Applications (EPE'22 ECCE Europe)

Residential solar photovoltaic (PV) installations frequently use power optimizers to increase their energy production. In this application, the ability to regulate a wide range of voltage with high efficiency is highly desirable. Thus, this paper pro... Read More about A Topology-Morphing Series Resonant Converter for Photovoltaic Module Applications.

Single Stage Dual Active Bridge AC-DC Converter with Active Power Decoupling (2018)
Presentation / Conference Contribution
Gottardo, D., De Lillo, L., Empringham, L., Costabeber, A., & Chen, L. (2018). Single Stage Dual Active Bridge AC-DC Converter with Active Power Decoupling. In SPEEDAM 2018 - Proceedings: International Symposium on Power Electronics, Electrical Drives, Automation and Motion (497-501). https://doi.org/10.1109/SPEEDAM.2018.8445410

The paper introduces a new a isolated DC-AC DAB converter topology, capable of active power decoupling on the AC side of the transformer, made up of two full bridges with no additional active component. The differential voltage modulated by the DC-si... Read More about Single Stage Dual Active Bridge AC-DC Converter with Active Power Decoupling.

Matrix converter open circuit fault behavior analysis and diagnosis with a model predictive control strategy (2018)
Journal Article
Zhang, J., Dan, H., Empringham, L., De Lillo, L., & Wheeler, P. (2018). Matrix converter open circuit fault behavior analysis and diagnosis with a model predictive control strategy. IEEE Journal of Emerging and Selected Topics in Power Electronics, 6(4), 1831-1839. https://doi.org/10.1109/jestpe.2018.2856460

A novel fast and reliable open circuit fault diagnosis strategy for a Matrix Converter with a Finite Control Set Model Predictive Control strategy is proposed in this paper. Current sensors are located ahead of the clamp circuit to measure the output... Read More about Matrix converter open circuit fault behavior analysis and diagnosis with a model predictive control strategy.

IEEE ITRW working group position paper: packaging and integration: unlocking the full potential of wide-bandgap devices (2018)
Journal Article
Johnson, M., Wilson, P. R., Empringham, L., & De Lillo, L. (2018). IEEE ITRW working group position paper: packaging and integration: unlocking the full potential of wide-bandgap devices. IEEE Power Electronics Magazine, 5(2), 26-33. https://doi.org/10.1109/mpel.2018.2822246

The International Technology Roadmap for Wide-Bandgap Power Semiconductors (ITRW) has four distinct technical working groups, each providing its own perspective on the technology and industrial drivers for the adoption of wide-bandgap (WBG) power sem... Read More about IEEE ITRW working group position paper: packaging and integration: unlocking the full potential of wide-bandgap devices.

Matrix converter open circuit fault diagnosis with asymmetric one zero SVM (2017)
Presentation / Conference Contribution
Zhang, J., Empringham, L., De Lillo, L., Dan, H., & Wheeler, P. (2017). Matrix converter open circuit fault diagnosis with asymmetric one zero SVM.

An open-circuit fault detection and diagnosis strategy for a direct matrix converter is proposed in this paper. The current recirculating path during an open circuit condition is considered in detail with the aim of contributing more expert knowledge... Read More about Matrix converter open circuit fault diagnosis with asymmetric one zero SVM.

Differential buck single phase grid connected AC-DC converter with active power decoupling using a flipping Capacitor (2017)
Presentation / Conference Contribution
Gottardo, D., De Lillo, L., Empringham, L., & Costabeber, A. (2017). Differential buck single phase grid connected AC-DC converter with active power decoupling using a flipping Capacitor.

This paper introduces a new single-phase AC-DC converter capable of achieving independent voltage control across a dedicated power decoupling capacitor, by exploiting the same full bridge that controls the grid current in combination with two bidirec... Read More about Differential buck single phase grid connected AC-DC converter with active power decoupling using a flipping Capacitor.

Matrix converter open circuit behavior analysis (2016)
Presentation / Conference Contribution
Zhang, J., Brunson, C., Bowden, J., Wheeler, P., & De Lillo, L. (2016). Matrix converter open circuit behavior analysis. In IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. https://doi.org/10.1109/IECON.2016.7793184

The matrix converter current recirculating path during an open circuit condition is given in detail with the aim of contributing more expert knowledge to a fault detection system for matrix converter. Simulation results were obtained demonstrating ho... Read More about Matrix converter open circuit behavior analysis.

A low capacitance single-phase AC-DC converter with inherent power ripple decoupling (2016)
Presentation / Conference Contribution
Gottardo, D., De Lillo, L., Empringham, L., & Costabeber, A. (2016). A low capacitance single-phase AC-DC converter with inherent power ripple decoupling.

This paper proposes a new single-phase AC-DC conversion topology with inherent power ripple decoupling, based on the combination of a PWM H-bridge inverter, an AC side LC filter and a ZVS line commutated H-bridge. A capacitor on the AC side is used a... Read More about A low capacitance single-phase AC-DC converter with inherent power ripple decoupling.

Experimental comparison of devices thermal cycling in direct matrix converters (DMC) and Indirect Matrix Converters (IMC) using SiC MOSFETs (2016)
Presentation / Conference Contribution
Trentin, A., Zanchetta, P., Empringham, L., De Lillo, L., Wheeler, P., & Clare, J. C. (2016). Experimental comparison of devices thermal cycling in direct matrix converters (DMC) and Indirect Matrix Converters (IMC) using SiC MOSFETs.

This paper presents an experimental comparison between a Direct Matrix Converter and an Indirect Matrix Converter in terms of semiconductor devices thermal cycling. Both converters have been designed and built using SiC MOSFETs; the Indirect Matrix C... Read More about Experimental comparison of devices thermal cycling in direct matrix converters (DMC) and Indirect Matrix Converters (IMC) using SiC MOSFETs.

Experimental efficiency comparison between a direct matrix converter and an indirect matrix converter using both Si IGBTs and SiC MOSFETs (2016)
Journal Article
Trentin, A., Liliana de Lillio, L., Empringham, L., Zanchetta, P., Wheeler, P., & Clare, J. C. (2016). Experimental efficiency comparison between a direct matrix converter and an indirect matrix converter using both Si IGBTs and SiC MOSFETs. IEEE Transactions on Industry Applications, 52(5), 4135-4145. https://doi.org/10.1109/TIA.2016.2573752

This paper presents an experimental efficiency comparison study between two different direct AC-AC converter topologies: a direct matrix converter (DMC) and an indirect matrix converter (IMC). The evaluation is performed under variable load condition... Read More about Experimental efficiency comparison between a direct matrix converter and an indirect matrix converter using both Si IGBTs and SiC MOSFETs.

A hybrid control method to suppress the three time fundamental frequency neutral-point voltage fluctuation in a VIENNA rectifier (2015)
Journal Article
Song, W.-Z., Xing, F.-X., Yang, H., Empringham, L., De Lillo, L., Wheeler, P., …Zhong, Y.-R. (2015). A hybrid control method to suppress the three time fundamental frequency neutral-point voltage fluctuation in a VIENNA rectifier. IEEE Journal of Emerging and Selected Topics in Power Electronics, 4(2), https://doi.org/10.1109/JESTPE.2015.2503125

This paper presents a solution to the control of the three times fundamental frequency fluctuation of the neutral-point in a VIENNA rectifier. A hybrid method combining a dynamic adjustment factor with a voltage deviation control of the split DC-link... Read More about A hybrid control method to suppress the three time fundamental frequency neutral-point voltage fluctuation in a VIENNA rectifier.

Short-circuit fault analysis and isolation strategy for matrix converters (2015)
Journal Article
Wang, L.-N., De Lillo, L., Brunson, C., Empringham, L., & Wheeler, P. (in press). Short-circuit fault analysis and isolation strategy for matrix converters. Journal of Central South University of Technology, 22(9), https://doi.org/10.1007/s11771-015-2886-y

The behavior of matrix converter (MC) drive systems under the condition of MC short-circuit faults is comprehensively investigated. Two isolation strategies using semiconductors and high speed fuses (HSFs) for MC short-circuit faults are examined and... Read More about Short-circuit fault analysis and isolation strategy for matrix converters.

Experimental comparison of a matrix converter using Si IGBT and SiC MOSFETs (2015)
Journal Article
Trentin, A., De Lillo, L., Empringham, L., Wheeler, P., & Clare, J. C. (2015). Experimental comparison of a matrix converter using Si IGBT and SiC MOSFETs. IEEE Journal of Emerging and Selected Topics in Power Electronics, 3(2), https://doi.org/10.1109/JESTPE.2014.2381001

This paper presents an analytical and experimental comparison between comparable Silicon (Si) IGBTs and Silicon Carbide (SiC) MOSFETS when used in a direct AC/AC matrix converter circuit. The switching performance of the two devices is analysed and t... Read More about Experimental comparison of a matrix converter using Si IGBT and SiC MOSFETs.

Open circuit fault detection and diagnosis in matrix converters (2014)
Journal Article
Brunson, C., Empringham, L., De Lillo, L., Wheeler, P., & Clare, J. C. (2014). Open circuit fault detection and diagnosis in matrix converters. IEEE Transactions on Power Electronics, 30(5), https://doi.org/10.1109/TPEL.2014.2364152

With the increased use of power electronics in aerospace, automotive, industrial, and energy generation sectors, the demand for highly reliable and power dense solutions has increased. Matrix converters become attractive when taking into account dema... Read More about Open circuit fault detection and diagnosis in matrix converters.

Reduction of output common mode voltage using a novel SVM implementation in matrix converters for improved motor lifetime (2014)
Journal Article
Espina, J., Ortega, C., De Lillo, L., Empringham, L., Balcells, J., & Arias, A. (2014). Reduction of output common mode voltage using a novel SVM implementation in matrix converters for improved motor lifetime. IEEE Transactions on Industrial Electronics, 61(11), https://doi.org/10.1109/TIE.2014.2304931

This paper presents the study of an alternative Space Vector Modulation (SVM) implementation for Matrix Converters (MC) which reduces the output Common Mode (CM) voltage. The strategy is based on replacing the MC zero vectors by the rotating ones. In... Read More about Reduction of output common mode voltage using a novel SVM implementation in matrix converters for improved motor lifetime.

Design challenges in the use of silicon carbide JFETs in matrix converter applications (2013)
Journal Article
Empringham, L., De Lillo, L., & Shulz, M. (2013). Design challenges in the use of silicon carbide JFETs in matrix converter applications. IEEE Transactions on Power Electronics, 29(5), https://doi.org/10.1109/TPEL.2013.2290835

This paper investigates some of the challenges en¬countered during the implementation of a Silicon Carbide JFET matrix converter which has been designed to meet a specific power density of 20kW/litre with forced air cooling. After a brief introductio... Read More about Design challenges in the use of silicon carbide JFETs in matrix converter applications.