Skip to main content

Research Repository

Advanced Search

All Outputs (58)

Assessing correlations between two linear amplitude sweep (LAS) standards for evaluating the fatigue properties of aged bitumen (2024)
Journal Article
Hu, Y., Sreeram, A., Bahia, H. U., Airey, G. D., Si, W., Li, B., & Xu, X. (2024). Assessing correlations between two linear amplitude sweep (LAS) standards for evaluating the fatigue properties of aged bitumen. International Journal of Pavement Engineering, 25(1), Article 2375419. https://doi.org/10.1080/10298436.2024.2375419

Linear amplitude sweep (LAS) is an accelerated and well-established testing method to evaluate bitumen fatigue. However, there are different versions of LAS procedures employed. Significant differences in loading modes, damage failure criteria and ca... Read More about Assessing correlations between two linear amplitude sweep (LAS) standards for evaluating the fatigue properties of aged bitumen.

Recovering the properties of aged bitumen using bio-rejuvenators derived from municipal wastes (2024)
Journal Article
Hu, Y., Omairey, E., Hughes, D., Bailey, H., Watkins, M., Twitchen, J., …Sreeram, A. (2024). Recovering the properties of aged bitumen using bio-rejuvenators derived from municipal wastes. Construction and Building Materials, 438, Article 137268. https://doi.org/10.1016/j.conbuildmat.2024.137268

Ageing of bitumen leads to significant performance deterioration of asphalt pavements and leads to material properties that are not conducive to recycling. Aiming to maximise the reusability of bitumen, this study investigated the feasibility of reju... Read More about Recovering the properties of aged bitumen using bio-rejuvenators derived from municipal wastes.

Characterisation of bitumen through multiple ageing-rejuvenation cycles (2024)
Journal Article
Hu, Y., Allanson, M., Sreeram, A., Ryan, J., Wang, H., Zhou, L., …Airey, G. D. (2024). Characterisation of bitumen through multiple ageing-rejuvenation cycles. International Journal of Pavement Engineering, 25(1), Article 2365350. https://doi.org/10.1080/10298436.2024.2365350

The multiple recycling of bitumen offers the possibility of reusing it for repeated lifecycles and achieve a higher degree of circularity of materials used in pavement construction. Aiming to identify the prospect, this study aged bitumen in a labora... Read More about Characterisation of bitumen through multiple ageing-rejuvenation cycles.

Investigation of the bonding properties of bitumen using a novel modified binder bond strength test (2024)
Journal Article
Zhou, L., Airey, G., Zhang, Y., Wang, C., & Zhong, H. (2024). Investigation of the bonding properties of bitumen using a novel modified binder bond strength test. Construction and Building Materials, 434, Article 136784. https://doi.org/10.1016/j.conbuildmat.2024.136784

The binder bond strength (BBS) test can directly quantify the bonding of bitumen-stone joints. However, the index "bond strength" used in this method cannot provide a clear distinction when evaluating the performance of various bitumen, and some resu... Read More about Investigation of the bonding properties of bitumen using a novel modified binder bond strength test.

Optimising the dosage of bio-rejuvenators in asphalt recycling: A rejuvenation index based approach (2024)
Journal Article
Hu, Y., Ryan, J., Sreeram, A., Allanson, M., Pasandín, A. R., Zhou, L., …Airey, G. D. (2024). Optimising the dosage of bio-rejuvenators in asphalt recycling: A rejuvenation index based approach. Construction and Building Materials, 433, Article 136761. https://doi.org/10.1016/j.conbuildmat.2024.136761

While significant research efforts have been devoted to the rejuvenation of aged bitumen using bio-rejuvenators, a universally recognised approach for dosage optimisation is still yet to be established. Aiming to develop standardised methods to deter... Read More about Optimising the dosage of bio-rejuvenators in asphalt recycling: A rejuvenation index based approach.

Comparative analysis of time sweep testing evaluation methods for the fatigue characterisation of aged bitumen (2024)
Journal Article
Hu, Y., Sreeram, A., Airey, G., Li, B., Si, W., & Wang, H. (2024). Comparative analysis of time sweep testing evaluation methods for the fatigue characterisation of aged bitumen. Construction and Building Materials, 432, Article 136698. https://doi.org/10.1016/j.conbuildmat.2024.136698

Ageing of bitumen changes its stiffness related properties and is thought to have a considerable impact on its fatigue performance. Time sweep tests are a commonly used methodology to evaluate the fatigue performance of bitumen over the course of its... Read More about Comparative analysis of time sweep testing evaluation methods for the fatigue characterisation of aged bitumen.

Examining the efficacy of promising antioxidants to mitigate asphalt binder oxidation: insights from a worldwide interlaboratory investigation (2024)
Journal Article
Adwani, D., Pipintakos, G., Mirwald, J., Wang, Y., Hajj, R., Guo, M., …Bhasin, A. (2024). Examining the efficacy of promising antioxidants to mitigate asphalt binder oxidation: insights from a worldwide interlaboratory investigation. International Journal of Pavement Engineering, 25(1), Article 2332363. https://doi.org/10.1080/10298436.2024.2332363

Oxidative aging induces significant stiffening of asphalt binders that leads to a pronounced reduction in the overall durability of asphalt pavements. The strategic implementation of antioxidant additives provides a potential solution to alleviate th... Read More about Examining the efficacy of promising antioxidants to mitigate asphalt binder oxidation: insights from a worldwide interlaboratory investigation.

A molecular dynamics analysis of the influence of iron corrosion products on the healing process of bitumen (2024)
Journal Article
Xu, H., Zou, Y., Airey, G., Wang, H., Zhang, H., Wu, S., & Chen, A. (2024). A molecular dynamics analysis of the influence of iron corrosion products on the healing process of bitumen. Construction and Building Materials, 421, Article 135662. https://doi.org/10.1016/j.conbuildmat.2024.135662

Corrosion of iron materials in the asphalt concrete pavement occurs commonly when the bitumen film peels off, and the generation of corrosion products would affect the healing performance of bitumen. To identify the affection, this research focuses o... Read More about A molecular dynamics analysis of the influence of iron corrosion products on the healing process of bitumen.

Interfacial characteristics between bitumen and corrosion products on steel slag surface from molecular scale (2024)
Journal Article
Xu, H., Zou, Y., Airey, G., Wang, H., Zhang, H., Wu, S., …Liang, Y. (2024). Interfacial characteristics between bitumen and corrosion products on steel slag surface from molecular scale. Construction and Building Materials, 417, Article 135324. https://doi.org/10.1016/j.conbuildmat.2024.135324

Corrosion commonly happened on the surface of steel slag during the weathering and accumulation process, whose products would form weak points and affect the interface between bitumen and steel slag. To clear its characteristics in the atomic scales,... Read More about Interfacial characteristics between bitumen and corrosion products on steel slag surface from molecular scale.

Wetting of bio-rejuvenator nanodroplets on bitumen: A molecular dynamics investigation (2024)
Journal Article
Xu, H., Zou, Y., Airey, G., Wang, H., Zhang, H., Wu, S., & Chen, A. (2024). Wetting of bio-rejuvenator nanodroplets on bitumen: A molecular dynamics investigation. Journal of Cleaner Production, 444, Article 141140. https://doi.org/10.1016/j.jclepro.2024.141140

Wetting is the first step during the mix process between rejuvenator and bitumen, which is important for mix efficiency and performance recovery. The wetting of bio-rejuvenator nanodroplets on bitumen was investigated by molecular dynamics (MD) simul... Read More about Wetting of bio-rejuvenator nanodroplets on bitumen: A molecular dynamics investigation.

Review of methodology for life cycle assessment and life cycle cost analysis of asphalt pavements (2023)
Journal Article
Suwarto, F., Parry, T., & Airey, G. (2023). Review of methodology for life cycle assessment and life cycle cost analysis of asphalt pavements. Road Materials and Pavement Design, https://doi.org/10.1080/14680629.2023.2278149

Different approaches continue to be used to evaluate the environmental and financial impactsof road pavements throughout their life cycle. This paper aims to provide a methodological review of published studies of asphalt pavement Life Cycle Assessme... Read More about Review of methodology for life cycle assessment and life cycle cost analysis of asphalt pavements.

Predicting pavement performance using distress deterioration curves (2023)
Journal Article
Abed, A., Rahman, M., Thom, N., Hargreaves, D., Li, L., & Airey, G. (2024). Predicting pavement performance using distress deterioration curves. Road Materials and Pavement Design, 25(6), 1174-1190. https://doi.org/10.1080/14680629.2023.2238094

Highway Authorities in the UK use Surface Condition Assessment for the National Network of Roads (SCANNER) in assessing and managing their road networks. This survey vehicle utilises laser measurements to detect and quantify most of the distress on t... Read More about Predicting pavement performance using distress deterioration curves.

2D Mesoscale cracking simulation of partially saturated asphalt based on moisture diffusion and a cohesive zone model (2023)
Journal Article
Li, L., Wu, J., Thom, N., Hargreaves, D., Airey, G., Zhu, J., …Zhang, Z. (2023). 2D Mesoscale cracking simulation of partially saturated asphalt based on moisture diffusion and a cohesive zone model. International Journal of Pavement Engineering, 24(1), Article 2242557. https://doi.org/10.1080/10298436.2023.2242557

The primary objective of this paper was to develop a combined model that incorporates moisture diffusion and a cohesive zone model, addressing anisotropic and loading-rate dependent cracking within partially saturated asphalt. Utilising X-ray CT scan... Read More about 2D Mesoscale cracking simulation of partially saturated asphalt based on moisture diffusion and a cohesive zone model.

Engineering characterization and environmental analysis of natural rubber latex modified asphalt mixture (2023)
Journal Article
Suwarto, F., Parry, T., Thom, N., Airey, G., Abed, A., Rahman, T., & Wititanapanit, J. (2023). Engineering characterization and environmental analysis of natural rubber latex modified asphalt mixture. Construction and Building Materials, 402, Article 132970. https://doi.org/10.1016/j.conbuildmat.2023.132970

Natural Rubber Latex (NRL) has attracted considerable interest as a resource for renewable paving materials due to its potential to lessen environmental impact. In order to gain a thorough understanding of the performance of NRL, this study evaluated... Read More about Engineering characterization and environmental analysis of natural rubber latex modified asphalt mixture.

Analysis and Prediction of Pothole Formation Rate Using Spatial Density Measurements and Pavement Condition Indicators (2023)
Journal Article
Abed, A., Rahman, M., Thom, N., Hargreaves, D., Li, L., & Airey, G. (2023). Analysis and Prediction of Pothole Formation Rate Using Spatial Density Measurements and Pavement Condition Indicators. Transportation Research Record, 2677(11), 651-664. https://doi.org/10.1177/03611981231166684

Potholes represent one of the dangerous distress types on roads. They form as a result of various factors, including water ingress, freeze–thaw, and pavement condition deterioration. In the UK, 1.7 million potholes were repaired in 2021; this critica... Read More about Analysis and Prediction of Pothole Formation Rate Using Spatial Density Measurements and Pavement Condition Indicators.

Uncertainty analysis of life cycle assessment of asphalt surfacings (2023)
Journal Article
Abed, A., Godoi Bizarro, D. E., Neves, L., Parry, T., Keijzer, E., Kalman, B., …Airey, G. (2023). Uncertainty analysis of life cycle assessment of asphalt surfacings. Road Materials and Pavement Design, 25(2), 219-238. https://doi.org/10.1080/14680629.2023.2199882

The Life Cycle Assessment (LCA) of asphalt pavements are associated with significant uncertainty resulting from variability in the quantity and impact of individual components, the quality of data for each component, and variability of asphalt durabi... Read More about Uncertainty analysis of life cycle assessment of asphalt surfacings.

Improved Multi-layer Analysis of Pavement Response Using Neural Networks to Optimize Numerical Integration (2022)
Journal Article
Abed, A., Thom, N., Campos-Guereta, I., & Airey, G. (2024). Improved Multi-layer Analysis of Pavement Response Using Neural Networks to Optimize Numerical Integration. International Journal of Pavement Engineering, 17(3), 549-562. https://doi.org/10.1007/s42947-022-00255-x

This paper presents a new accurate method to compute the mechanical response of pavement structures using an Artificial Neural Network (ANN) model coupled with Multi-Layer Elastic Analysis (MLEA). The ANN model is used to improve the numerical integr... Read More about Improved Multi-layer Analysis of Pavement Response Using Neural Networks to Optimize Numerical Integration.

Renewable binders from waste biomass for road construction: A review on thermochemical conversion technologies and current developments (2022)
Journal Article
Weir, A., Jiménez del Barco Carrión, A., Queffélec, C., Bujoli, B., Chailleux, E., Uguna, C., …Airey, G. (2022). Renewable binders from waste biomass for road construction: A review on thermochemical conversion technologies and current developments. Construction and Building Materials, 330, Article 127076. https://doi.org/10.1016/j.conbuildmat.2022.127076

Biobinders (binders manufactured from biomass) are becoming popular in asphalt engineering due to growing environmental concerns of greenhouse gas emissions from the use of fossil fuels and depleting petroleum bitumen reserves. Waste biomass products... Read More about Renewable binders from waste biomass for road construction: A review on thermochemical conversion technologies and current developments.

Characterisation of fatigue damage in asphalt mixtures using X-ray computed tomography (2022)
Journal Article
Chen, A., Airey, G., Thom, N., & Li, Y. (2022). Characterisation of fatigue damage in asphalt mixtures using X-ray computed tomography. Road Materials and Pavement Design, https://doi.org/10.1080/14680629.2022.2029756

The high-resolution X-ray CT was applied to investigate the fatigue damage evolution of asphalt mixtures. The detailed Xray CT images in the centre of the samples were used to characterise the fatigue cracking and air voids increase at different vert... Read More about Characterisation of fatigue damage in asphalt mixtures using X-ray computed tomography.

Black Space Rheological Assessment of Asphalt Material Behavior (2021)
Journal Article
Airey, G. D., Rowe, G. M., Sias, J. E., Di Benedetto, H., Sauzeat, C., & Dave, E. V. (2022). Black Space Rheological Assessment of Asphalt Material Behavior. Journal of Testing and Evaluation, 50(2), 770-787. https://doi.org/10.1520/JTE20210205

Black Space diagrams representing rheological data of asphalt materials in the form of complex modulus (|G*| or |E*|) versus phase angle (δ) have been successfully used for interpretation of material behavior and performance. Previous studies have us... Read More about Black Space Rheological Assessment of Asphalt Material Behavior.