All Outputs (66)

Simplified Analytical Machine Sizing for Surface Mounted Permanent Magnet Machines (2019)
Conference Proceeding

This paper proposes a simple analytical machine sizing process for a three-phase surface mounted permanent magnet synchronous machines appropriate for both system level analysis and preliminary machine design. For system-level analysis, the proposed... Read More about Simplified Analytical Machine Sizing for Surface Mounted Permanent Magnet Machines.

Sizing, design, and modelling of aerospace electric drive system with long feeder cables (2019)
Conference Proceeding

The aviation industry is tending towards more electric aircraft, replacing conventionally pneumatic, hydraulic, and mechanical systems with electrical solutions. The electrification of actuators is motivated by increased efficiency, reduced maintenan... Read More about Sizing, design, and modelling of aerospace electric drive system with long feeder cables.

Novel Motor-Shaped Rotational Inductor for Motor Drive Applications (2019)
Journal Article

This paper presents a validation of the novel motor-shaped rotational inductor. To validate the concept, 12 slots 2 poles rotational inductor is tested at different supply frequencies and rotor speeds. Experimental results have shown that the iron lo... Read More about Novel Motor-Shaped Rotational Inductor for Motor Drive Applications.

The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft (2018)
Conference Proceeding

Maximizing the power density as well as efficiency are two of the main critical aspects for engineers who are designing electrical machines for aerospace applications. Iron losses have a significant impact on the total machine efficiency, thermal sta... Read More about The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft.

Combined Thermofluid and Electromagnetic Optimisation of Stator Vent Cooling (2018)
Conference Proceeding

© 2018 IEEE. A combined electromagnetic and thermal modelling approach has been developed to optimise the design of multiple radial stator vents in an air-cooled, synchronous generator with a power rating of several hundred kVA. An experimentally val... Read More about Combined Thermofluid and Electromagnetic Optimisation of Stator Vent Cooling.

Mass Production Costing of Induction Machines for Automotive Applications (2018)
Conference Proceeding

Cost is one of the key parameters of electric machines designed for automotive applications. In order to keep manufacturing cost low, it is desirable to estimate the manufacturing cost of the machine in the early stages of the design process. For thi... Read More about Mass Production Costing of Induction Machines for Automotive Applications.

Design of an Integrated Inductor for 45kW Aerospace Starter-Generator (2018)
Conference Proceeding

A close physical and functional integration of passive components is required to make an efficient and power dense overall system. Such power dense systems are a prerequisite in aerospace and marine applications. This paper presents a design of an in... Read More about Design of an Integrated Inductor for 45kW Aerospace Starter-Generator.

Electrical Machine Rotor Shielding for Low Cost Electrical Drive (2018)
Conference Proceeding

Electrical machine rotor shielding has been proposed for high-speed electrical machines, i.e. ≥50krpm, where a smooth current waveform becomes difficult and costly to generate due to the required high switching frequency. The rotor shielding is used... Read More about Electrical Machine Rotor Shielding for Low Cost Electrical Drive.

A methodology to remove stator skew in small-medium size synchronous generators via innovative damper cage designs (2018)
Journal Article

This paper proposes and investigates an innovative methodology that can have a significant impact on the market potential of wound field, small-medium size synchronous generators. The technique proposed here is aimed at removing the need for the trad... Read More about A methodology to remove stator skew in small-medium size synchronous generators via innovative damper cage designs.

Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle (2018)
Conference Proceeding

A switched reluctance machine (SRM) is very robust and capable to perform well under harsh conditions. It is simple in construction and avoids the use of magnets so it is cheap to manufacture. The powertrain of a hybrid vehicle presents challenging c... Read More about Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle.

Novel core designs to miniaturise passive magnetic components (2018)
Conference Proceeding

Converter sizes are often dominated by passive magnetic components. Passive magnetic component sizes are in turn limited by electromagnetic saturation and thermal limits. This paper covers two modifications to the air gaps of tape wound amorphous mag... Read More about Novel core designs to miniaturise passive magnetic components.

Considerations on the effects that core material machining has on an electrical machine's performance (2018)
Journal Article

An often-overlooked aspect during the development process of electrical machines, is the validity and accuracy of the machine material properties being used at the design stage. Designers usually consider the data provided by the materials supplier,... Read More about Considerations on the effects that core material machining has on an electrical machine's performance.

Geometry optimization and characterization of three-phase medium frequency transformer for 10kVA isolated DC-DC converter (2017)
Conference Proceeding

Three-phase Dual Active Bridge converter is advisable for the High-power DC-DC conversion system. In the ac link, galvanically isolated transformer operated at a medium frequency range provides stepping up or down of the secondary bridge voltage.... Read More about Geometry optimization and characterization of three-phase medium frequency transformer for 10kVA isolated DC-DC converter.

Design considerations for a high-power dual active bridge DC-DC converter with galvanically isolated transformer (2017)
Conference Proceeding

Multi-megawatt scale isolated DC-DC converters are likely to become increasingly popular as means to interconnect the MVDC grids of different voltage levels. Three-phase dual active bridge DC-DC (3DAB) converters operating with the zero-voltage switc... Read More about Design considerations for a high-power dual active bridge DC-DC converter with galvanically isolated transformer.

Design optimization of integrated rotor-less inductors for high-speed AC drive applications (2017)
Conference Proceeding

Discrete sub-system due to passive elements in motor drive require functional and structural integration to make efficient and power dense overall system. Such power dense system is the prerequisite in aerospace and marine applications. This paper pr... Read More about Design optimization of integrated rotor-less inductors for high-speed AC drive applications.

Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators (2017)
Conference Proceeding

Objective of this paper is to provide design recommendations to improve the performance and power density of a 400kVA salient-pole synchronous generator, without exceeding the limitations due to critical parameters such as total harmonic distortion o... Read More about Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators.

Design optimization of integrated rotational inductor for high-speed AC drive applications (2017)
Conference Proceeding

In order to make an efficient and power dense overall system, a close physical and functional integration of passive components is required instead of having a separate sub¬system for passives. Such power dense system is vital in aerospace and marine... Read More about Design optimization of integrated rotational inductor for high-speed AC drive applications.

Design optimization of a high-power transformer for three-phase dual active bridge DC-DC converter for MVDC grids (2016)
Conference Proceeding

High-power DC-DC converter will be one of the essential technologies for the future DC grids. Especially, a three-phase dual-active bridge DC-DC (3DAB) Converter is highly suitable for high-power DC systems. Key component within this converter is the... Read More about Design optimization of a high-power transformer for three-phase dual active bridge DC-DC converter for MVDC grids.

A high-power DC-DC converter based dual active bridge for MVDC grids on offshore wind farms (2016)
Conference Proceeding

This paper presents the steady-state analysis of a high power step-up DC-DC converter based three-phase dual active bridge (3DAB) for use as a medium voltage (MV) DC-DC collector of offshore wind farms. An optimization procedure for a high-power medi... Read More about A high-power DC-DC converter based dual active bridge for MVDC grids on offshore wind farms.

Novel integrative options for passive filter inductor in high speed AC drives (2016)
Conference Proceeding

This paper presents novel integration options for passive inductor which include: motor-shaped rotational and motor-shaped rotor-less inductor for high speed motor drive system. The novel options have been designed and their performance is compared w... Read More about Novel integrative options for passive filter inductor in high speed AC drives.