All Outputs (15)

A Novel Thermal Network Model Used for Temperature Calculation and Analysis on Brushless Doubly-Fed Generator With Winding Encapsulating Structure (2018)
Journal Article
Jiang, X., Zhang, Y., Jin, S., Zhang, F., & Gerada, C. (2019). A Novel Thermal Network Model Used for Temperature Calculation and Analysis on Brushless Doubly-Fed Generator With Winding Encapsulating Structure. IEEE Transactions on Industry Applications, 55(2), 1473-1483. https://doi.org/10.1109/tia.2018.2883542

© 1972-2012 IEEE. In recent years, magnetic-barrier rotor has been put forward for brushless doubly-fed generator (BDFG) application owing to its desirable performance, such as high power density and strong magnetic coupling ability. However, it also... Read More about A Novel Thermal Network Model Used for Temperature Calculation and Analysis on Brushless Doubly-Fed Generator With Winding Encapsulating Structure.

Wide Bandgap Voltage Source Inverter Design for Automotive Electric Drivetrain (2018)
Presentation / Conference Contribution
Savi, F., Buticchi, G., Gerada, C., Wheeler, P., & Barater, D. (2018, November). Wide Bandgap Voltage Source Inverter Design for Automotive Electric Drivetrain. Presented at 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2018, Nottingham, UK

In this paper a high power, high frequency voltage source inverter for automotive traction application is reviewed. The main objectives of the design process is the maximization of power density, while keeping high efficiency and low weight. In this... Read More about Wide Bandgap Voltage Source Inverter Design for Automotive Electric Drivetrain.

An Integrated Method for Three-Phase AC Excitation and High-Frequency Voltage Signal Injection for Sensorless Starting of Aircraft Starter/Generator (2018)
Journal Article
Wei, J., Xu, H., Zhou, B., Zhang, Z., & Gerada, C. (2019). An Integrated Method for Three-Phase AC Excitation and High-Frequency Voltage Signal Injection for Sensorless Starting of Aircraft Starter/Generator. IEEE Transactions on Industrial Electronics, 66(7), 5611-5622. https://doi.org/10.1109/tie.2018.2871795

© 1982-2012 IEEE. This paper proposes an integrated method of three-phase ac excitation and high-frequency voltage signal injection (HFVSI) for sensorless controlled starting of brushless synchronous machines (BSM) used as starter/generator in variab... Read More about An Integrated Method for Three-Phase AC Excitation and High-Frequency Voltage Signal Injection for Sensorless Starting of Aircraft Starter/Generator.

Mass Production Costing of Induction Machines for Automotive Applications (2018)
Presentation / Conference Contribution
Hundak, V., Cox, T., Vakil, G., & Gerada, C. (2018). Mass Production Costing of Induction Machines for Automotive Applications. In 2018 IEEE Transportation and Electrification Conference and Expo (ITEC) (500-505). https://doi.org/10.1109/ITEC.2018.8450116

Cost is one of the key parameters of electric machines designed for automotive applications. In order to keep manufacturing cost low, it is desirable to estimate the manufacturing cost of the machine in the early stages of the design process. For thi... Read More about Mass Production Costing of Induction Machines for Automotive Applications.

Design of an Integrated Inductor for 45kW Aerospace Starter-Generator (2018)
Presentation / Conference Contribution
Raza Khowja, M., Gerada, C., Vakil, G., Quadri, S. Q., Wheeler, P., & Patel, C. (2018). Design of an Integrated Inductor for 45kW Aerospace Starter-Generator. In 2018 IEEE Transportation and Electrification Conference and Expo (ITEC) (570-575). https://doi.org/10.1109/ITEC.2018.8450246

A close physical and functional integration of passive components is required to make an efficient and power dense overall system. Such power dense systems are a prerequisite in aerospace and marine applications. This paper presents a design of an in... Read More about Design of an Integrated Inductor for 45kW Aerospace Starter-Generator.

Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle (2018)
Presentation / Conference Contribution
Talha, A., Vakil, G., Cox, T., & Gerada, C. (2018). Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle. In NA

A switched reluctance machine (SRM) is very robust and capable to perform well under harsh conditions. It is simple in construction and avoids the use of magnets so it is cheap to manufacture. The powertrain of a hybrid vehicle presents challenging c... Read More about Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle.

Eccentric reluctance and permanent magnets synchronous machines comparison (2018)
Journal Article
Mahmoud, H., Bianchi, N., Degano, M., Al-Ani, M., & Gerada, C. (2018). Eccentric reluctance and permanent magnets synchronous machines comparison. IEEE Transactions on Industry Applications, 54(6), 5760-5771. https://doi.org/10.1109/TIA.2018.2848278

This paper deals with a comparative study between reluctance (REL), permanent magnet assisted reluctance (PMAREL), and surface mounted permanent magnet synchronous machines with rotor eccentricity. Static, dynamic, and combined eccentricity cases are... Read More about Eccentric reluctance and permanent magnets synchronous machines comparison.

Novel core designs to miniaturise passive magnetic components (2018)
Presentation / Conference Contribution
Walker, A., Vakil, G., & Gerada, C. (2018). Novel core designs to miniaturise passive magnetic components. In NA

Converter sizes are often dominated by passive magnetic components. Passive magnetic component sizes are in turn limited by electromagnetic saturation and thermal limits. This paper covers two modifications to the air gaps of tape wound amorphous mag... Read More about Novel core designs to miniaturise passive magnetic components.

Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications (2018)
Journal Article
Zhao, W., Wang, X., Gerada, C., Zhang, H., Liu, C., & Wang, Y. (2018). Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications. IEEE Transactions on Magnetics, 54(11), Article 8106405. https://doi.org/10.1109/TMAG.2018.2835504

© 1965-2012 IEEE. High-speed permanent magnet synchronous machine (PMSM) can provide high power density and high efficiency, which is often highly desirable in high performance applications. A multi-physics optimization program based on the multi-obj... Read More about Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications.

Power quality improvement of synchronous generators using an active power filter (2018)
Journal Article
Abu-Jalala, A., Cox, T., Gerada, C., Rashed, M., Hamiti, T., & Brown, N. (2018). Power quality improvement of synchronous generators using an active power filter. IEEE Transactions on Industry Applications, 54(5), 4080-4090. https://doi.org/10.1109/TIA.2018.2828789

Active power filters (APF) are used to improve power quality and are commonly connected in parallel with the load at the point of common coupling (PCC). They are used to compensate for harmonics from nonlinear loads, for reactive power compensation a... Read More about Power quality improvement of synchronous generators using an active power filter.

Design and losses analysis of a high power density machine for flooded pump applications (2018)
Journal Article
Al-Timimy, A., Giangrande, P., Degano, M., Zeyuan, X., Galea, M., Gerada, C., Lo Calzo, G., Zhang, H., & Xia, L. (2019). Design and losses analysis of a high power density machine for flooded pump applications. IEEE Transactions on Industry Applications, 54(4), 3260-3270. https://doi.org/10.1109/TIA.2018.2821623

This paper describes the design process of a 10 kW 19000 rpm high power density surface mounted permanent magnet synchronous machine for a directly coupled pump application. In order to meet the required specifications, a compact machine, with coolin... Read More about Design and losses analysis of a high power density machine for flooded pump applications.

Synchronous reluctance motor iron losses: considering machine non-linearity at MTPA, FW, and MTPV operating conditions (2018)
Journal Article
Mahmoud, H., Bacco, G., Degano, M., Bianchi, N., & Gerada, C. (2018). Synchronous reluctance motor iron losses: considering machine non-linearity at MTPA, FW, and MTPV operating conditions. IEEE Transactions on Energy Conversion, 33(3), 1402-1410. https://doi.org/10.1109/TEC.2018.2811543

Synchronous reluctance machine has high flux density fluctuations in the iron due to the high harmonics results from the rotor anisotropy. Thus, an accurate computation of the iron losses is of paramount importance, especially during the design stage... Read More about Synchronous reluctance motor iron losses: considering machine non-linearity at MTPA, FW, and MTPV operating conditions.

Considerations on the effects that core material machining has on an electrical machine's performance (2018)
Journal Article
Al-Timimy, A., Vakil, G., Degano, M., Giangrande, P., Gerada, C., & Galea, M. (2018). Considerations on the effects that core material machining has on an electrical machine's performance. IEEE Transactions on Energy Conversion, 33(3), 1154-1163. https://doi.org/10.1109/TEC.2018.2808041

An often-overlooked aspect during the development process of electrical machines, is the validity and accuracy of the machine material properties being used at the design stage. Designers usually consider the data provided by the materials supplier,... Read More about Considerations on the effects that core material machining has on an electrical machine's performance.

Design of a stator for a high-speed turbo-generator with fixed permanent magnet rotor radius and volt-ampere constraints (2018)
Journal Article
Fernando, N., Arumugam, P., & Gerada, C. (2018). Design of a stator for a high-speed turbo-generator with fixed permanent magnet rotor radius and volt-ampere constraints. IEEE Transactions on Energy Conversion, 33(3), 1311-1320. https://doi.org/10.1109/TEC.2018.2804955

This paper investigates high-speed surface PM machine design for portable turbo-generator applications. The rotor radius is fixed to achieve certain optimal characteristics of the magnet retention mechanism. The basis of this paper is to design and s... Read More about Design of a stator for a high-speed turbo-generator with fixed permanent magnet rotor radius and volt-ampere constraints.

Magnetic field and torque output of packaged hydraulic torque motor (2018)
Journal Article
Yan, L., Duan, Z., Zhang, Q., Niu, S., Dong, Y., & Gerada, C. (2018). Magnetic field and torque output of packaged hydraulic torque motor. Energies, 11(1), https://doi.org/10.3390/en11010134

Hydraulic torque motors are one key component in electro-hydraulic servo valves that convert the electrical signal into mechanical motions. The systematic characteristics analysis of the hydraulic torque motor has not been found in the previous resea... Read More about Magnetic field and torque output of packaged hydraulic torque motor.