All Outputs (97)

Fixed switching frequency predictive control of an asymmetric source dual inverter system with a floating bridge for multilevel operation (2019)
Journal Article

This study proposes a modified modulated model predictive control (MMPC) scheme to control an open-end winding induction motor drive using an asymmetric source dual inverter with one floating bridge. The control algorithm uses a modulation algorithm... Read More about Fixed switching frequency predictive control of an asymmetric source dual inverter system with a floating bridge for multilevel operation.

High Torque Density Torque Motor With Hybrid Magnetization Pole Arrays for Jet Pipe Servo Valve (2019)
Journal Article

Torque motor is one key component that directly influences the dynamic performance of jet pipe servo valve in aircraft. In this paper, a novel torque motor with hybrid-magnetization pole arrays is proposed. By changing the magnetization patterns of p... Read More about High Torque Density Torque Motor With Hybrid Magnetization Pole Arrays for Jet Pipe Servo Valve.

Fluid flow and heat transfer analysis of TEFC machine end regions using more realistic end-winding geometry (2019)
Journal Article

Here, a typical small low-voltage totally enclosed fan-cooled (TEFC) motor (output power ∼10 kW) has been studied using computational fluid dynamics. The complexity of the end-winding geometries, often consisting of several insulated copper strands b... Read More about Fluid flow and heat transfer analysis of TEFC machine end regions using more realistic end-winding geometry.

The Influence of Winding Location in Flux-Switching Permanent-Magnet Machines (2019)
Journal Article

The main purpose of this paper is to investigate the influence of winding location on back electromotive force (EMF) and armature inductance in flux-switching permanent-magnet (FSPM) machines. To obtain an analytical solution, a double-stator-pitch m... Read More about The Influence of Winding Location in Flux-Switching Permanent-Magnet Machines.

Consideration on Eddy Current Reduction Techniques for Solid Materials Used in Unconventional Magnetic Circuits (2018)
Journal Article

The use of solid materials in tubular, linear machines has significant manufacturing benefits, as this removes the need for an axially laminated stator. However, this comes at the cost of extra eddy current losses. In this paper, a detailed analysis... Read More about Consideration on Eddy Current Reduction Techniques for Solid Materials Used in Unconventional Magnetic Circuits.

Enhanced power sharing transient with droop controllers for multi-three-phase synchronous electrical machines (2018)
Journal Article

This paper presents a droop-based dis- tributed control strategy for multi-three-phase machines that provides augmented controllability during power shar- ing transients. The proposed strategy is able to mitigate the mutual interactions among differe... Read More about Enhanced power sharing transient with droop controllers for multi-three-phase synchronous electrical machines.

Dielectric breakdown of alumina thin films produced by pulsed direct current magnetron sputtering (2018)
Journal Article

Alumina films (~2 μm thick) were deposited with a mixed Cu/Al interlayer onto copper. Direct current (DC)/Pulsed DC (PDC) magnetron sputtering techniques were independently compared for reactive alumina sputtering. In DC sputtered films, elemental al... Read More about Dielectric breakdown of alumina thin films produced by pulsed direct current magnetron sputtering.

Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications (2018)
Journal Article

© 1965-2012 IEEE. High-speed permanent magnet synchronous machine (PMSM) can provide high power density and high efficiency, which is often highly desirable in high performance applications. A multi-physics optimization program based on the multi-obj... Read More about Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications.

Thermal analysis of fault-tolerant electrical machines for more electric aircraft applications (2018)
Journal Article

For safety critical applications, electrical machines need to satisfy several constraints, in order to be considered fault-tolerant. In fact, if specific design choices and appropriate control strategies are adopted, fault-tolerant machines can opera... Read More about Thermal analysis of fault-tolerant electrical machines for more electric aircraft applications.

Power Loss and Thermal Analysis of a MW High-Speed Permanent Magnet Synchronous Machine (2017)
Journal Article

© 1986-2012 IEEE. High-speed permanent magnet synchronous machines (PMSMs) have attracted much attention due to their high power density, high efficiency, and compact size for direct-drive applications. However, the consequent power loss density is h... Read More about Power Loss and Thermal Analysis of a MW High-Speed Permanent Magnet Synchronous Machine.

Controlling DC permeability in cast steels (2017)
Journal Article

Annealing (at multiple cooling rates) and quenching (with tempering) was performed on specimens of cast steel of varying composition. The aim was to devise a method for selecting the steel with the highest permeability, from any given range of steels... Read More about Controlling DC permeability in cast steels.

Improved damper cage design for salient-pole synchronous generators (2016)
Journal Article

© 2016 IEEE. The benefits of implementing a damper winding in salient-pole synchronous generators are widely known and well consolidated. It is also well known that such a winding incurs extra losses in the machine due to a number of reasons. In orde... Read More about Improved damper cage design for salient-pole synchronous generators.

Design optimization of Halbach array permanent magnet motor to achieve sensorless performance using genetic algorithm (2016)
Journal Article

Purpose The purpose of this paper is to investigate Halbach array effects in surface mounted permanent magnet machine (SMPM) in terms of both self-sensing and torque capabilities. A comparison between a conventional SMPM, which has radially magnet... Read More about Design optimization of Halbach array permanent magnet motor to achieve sensorless performance using genetic algorithm.

Magnetically geared induction machines (2015)
Journal Article

A wound-rotor induction machine is artfully coupled to a magnetic gear to achieve a high-torque-density drive system called magnetically geared induction machine (MaGIM). The high-speed rotor of MaGIM is common to both the machine and gear sides. A r... Read More about Magnetically geared induction machines.

Permanent magnet machine design trade-offs to achieve sensorless control at high load (2015)
Journal Article

Purpose The purpose of this paper is to introduce a new design optimization technique for a surface mounted permanent magnet (SMPM) machine to increase sensorless performance at high loadings by compromising with torque capability. Design/meth... Read More about Permanent magnet machine design trade-offs to achieve sensorless control at high load.

Analysis of Vertical Strip Wound Fault-Tolerant Permanent Magnet Synchronous Machines (2013)
Journal Article

This paper investigates the behavior of a vector-controlled fault-tolerant permanent magnet motor drive system adopting a vertically placed strip winding (VSW) which can limit interturn short-circuit (SC) fault current to its rated value regardless o... Read More about Analysis of Vertical Strip Wound Fault-Tolerant Permanent Magnet Synchronous Machines.

Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management (2013)
Journal Article

This study is the first in a series dedicated to investigating the airflow and thermal management of electrical machines. Owing to the temperature dependent resistive losses in the machine's windings, any improvement in cooling provides a direct redu... Read More about Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management.