James Borg Bartolo
An investigation into the geometric parameters affecting field uniformity in four pole magnetisers
Bartolo, James Borg; Klimczyk, Piotr; Tiwisina, Kai; Denke, Patrick; Siebert, Stefan; Gerada, Christopher
Authors
Piotr Klimczyk
Kai Tiwisina
Patrick Denke
Stefan Siebert
CHRISTOPHER GERADA CHRIS.GERADA@NOTTINGHAM.AC.UK
Professor of Electrical Machines
Abstract
In recent years, the field-metric method for measuring the joule losses set up in an electrical steel laminate when subjected to a rotating field has gained popularity. The ideal geometry of the magnetiser required to set up such a field is still however the subject of much debate. The work presented in this paper aims at providing some useful guidelines which might be considered when undertaking the construction of the simplest of such magnetizing setups having four salient poles excited by a two phase system and using a square sample. A 3D model for this rotational power loss tester was simulated for different pole geometries with the induction uniformity being assessed for every alteration.
Citation
Bartolo, J. B., Klimczyk, P., Tiwisina, K., Denke, P., Siebert, S., & Gerada, C. (2015). An investigation into the geometric parameters affecting field uniformity in four pole magnetisers. International Journal of Applied Electromagnetics and Mechanics, 48(2,3), https://doi.org/10.3233/JAE-151992
Journal Article Type | Article |
---|---|
Acceptance Date | Jan 1, 2015 |
Publication Date | 2015 |
Deposit Date | Aug 11, 2017 |
Publicly Available Date | Aug 11, 2017 |
Journal | International Journal of Applied Electromagnetics and Mechanics |
Print ISSN | 1383-5416 |
Electronic ISSN | 1383-5416 |
Publisher | IOS Press |
Peer Reviewed | Peer Reviewed |
Volume | 48 |
Issue | 2,3 |
DOI | https://doi.org/10.3233/JAE-151992 |
Keywords | Two-dimensional magnetisers, iron losses |
Public URL | https://nottingham-repository.worktribe.com/output/740079 |
Publisher URL | http://content.iospress.com/articles/international-journal-of-applied-electromagnetics-and-mechanics/jae1992 |
Additional Information | James Borg Bartolo, Piotr Klimczyk, Kai Tiwisina, Patrick Denke, Stefan Siebert, Christopher Gerada, An investigation into the geometric parameters affecting field uniformity in four pole magnetisers, International Journal of Applied Electromagnetics and Mechanics, vol. 48, no. 2,3, pp. 225-232, 2015. The final publication is available at IOS Press through http://dx.doi.org/10.3233/JAE-151992. |
Contract Date | Aug 11, 2017 |
Files
An investigation into the geometric parameters affecting field uniformity in four pole magnetisers.pdf
(459 Kb)
PDF
You might also like
Analysis of Vertical Strip Wound Fault-Tolerant Permanent Magnet Synchronous Machines
(2013)
Journal Article
Special section on high speed electrical machines and drives
(2013)
Journal Article
Design of synchronous reluctance motors with multiobjective optimization algorithms
(2014)
Journal Article
High-speed electrical machines: technologies, trends and developments
(2013)
Journal Article
Downloadable Citations
About Repository@Nottingham
Administrator e-mail: discovery-access-systems@nottingham.ac.uk
This application uses the following open-source libraries:
SheetJS Community Edition
Apache License Version 2.0 (http://www.apache.org/licenses/)
PDF.js
Apache License Version 2.0 (http://www.apache.org/licenses/)
Font Awesome
SIL OFL 1.1 (http://scripts.sil.org/OFL)
MIT License (http://opensource.org/licenses/mit-license.html)
CC BY 3.0 ( http://creativecommons.org/licenses/by/3.0/)
Powered by Worktribe © 2024
Advanced Search